Jump to content
SAU Community

Recommended Posts

They are getting out. I'm a pleb and the 6258 GTR kit we bought off the shelf. no special favours etc. ordered and paid for it and it turned up a week later. I know the big frame stuff is a different story but they are getting there.

lol. they should be awesome.

Consider this. look at the EFR range and consider the 9180 flows 94lb/min. a single 6258 flows 44lb/min I would say it's not unreasonable to expect them to produce 80lb/min combined in a twin GTR set-up. that's 800hp of air.

the car they are going on has run 2530s/-5s and made the usual 350kw or so. it's also run GTRS/-10s and made the usual 400+ kw but with typical surge down low that's a pig to drive through (even on the track).

I would like to think these will be close to the -10 power but with close to -5 response. I wouldn't be disappointed if they make a little less than the -10s but without the surge down low and with fat midrange.

I'm not sure if anyone else has bought a set from full race for a GTR apart from the one in the US they tested on. so this may be the first 'retail' set that goes out the door.

hope to have them arrive next week.

The other turbo I got from BW/FR is here and has already been pipped up etc and should be running very, very soon. it's the big boy 9180. another mate of mine has a 8374 coming soon so it'll be interesting to compare the 3. in power terms it goes 8374 then twin 6258 then single 9180. I'm keen to see if that's how it plays out in real life and what kind of power/response compromise we get. the only difference really is the 9180 is on a 3L the other 2 are both 2.6.

What 9180 did you get housing wise? Still waiting on mine, paid Nov 13 2010. Quite depressing so far. I am fabbing a 321 stainless manifold and will need it to complete the manifold. Guess we'll see. At this stage I can still see it being a LONG way away. Which, quite frankly, doesn't impress me too much.

Edited by -Totenkopf-

totenkopf. it's a 1.05 twin scroll (ext gate). yeah we ordered last year too. I know BW have had production issues and I guess want to make things right before filling orders. hopefully they are worth the wait (I think they will be). hope you get yours soon mate. :)

Scott and I had a little behind the scenes chat. We cool...cheers.gif

Correct! Common ground met.

All is fair in love and war. We got to learn and clarify a few things and I got to push a few buttons when all I originally wanted to say was the 6boost collectors are sexy.

I blame STATUS, that prick he stated it. :whistling:

Anyone want to have a stab at the projected RWKW of the SR flavor of the month EFR?

Imagine how much quicker it would be with a Vipec! :whistling:

But back OT, from what your saying Mr Baron, you guys are seeing exceptional low rpm performance from the big 9180, so much so you would be happy to see more lag with a larger turbo. So realistically for someone such as myself also running a 3litre but only aiming for 550rwhp with a power ceiling around 600rwhp the extra expense of say an 8374 over a traditional t4 ts gt35/s300sx doesn't seem worth it (if you follow my logic). Obviously in a forum pissing contest it's a no brainer, but on the racetrack...?

Imagine how much quicker it would be with a Vipec! :whistling:

But back OT, from what your saying Mr Baron, you guys are seeing exceptional low rpm performance from the big 9180, so much so you would be happy to see more lag with a larger turbo. So realistically for someone such as myself also running a 3litre but only aiming for 550rwhp with a power ceiling around 600rwhp the extra expense of say an 8374 over a traditional t4 ts gt35/s300sx doesn't seem worth it (if you follow my logic). Obviously in a forum pissing contest it's a no brainer, but on the racetrack...?

yeah I see your logic. I guess for a 3L that's already going to achieve the power and response you want with a more basic TS turbo then sure there is not a huge advantage in the EFR, but you can have your power goal and even better response wouldn't you want it? in a street car it will be noticeably faster? the other option these give then is have the same response but more power by going up a size in turbo.

I still think the kick arse GTR set-up will be these twin 6258s. but the singles make an impressive set-up and simplicity of a single (even a twin gate TS one) is something to consider too.

They are getting out. I'm a pleb and the 6258 GTR kit we bought off the shelf. no special favours etc. ordered and paid for it and it turned up a week later. I know the big frame stuff is a different story but they are getting there.

I know, It was a bit tongue in cheek....My bad.

Yeah, If I had ordered a twin kit I would be rolling now, I'm waiting for a 8374 T4 .92a/r IWG.

....But we have 8" of snow in Christchurch yesterday, So couldn't drive the car anyway! haha

Crazy weather eh? I can see snow on the hills around me right now and I am in Welly ffs. Wellington wind is bad enough without throwing ice into it.

Hope something shows up for you soon enough man, quite keen to see how you find it after previous combinations :)

yeah it doesn't look like final set-up and complete testing will be done before WTAC due to a few snags along the way. but once done I'm sure BW and FR will want to make the results public. we've never published any dyno sheets etc from the car before but the way it performs on track is a pretty fair indicator of it's performance. so for now it's still work in progress....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...