Jump to content
SAU Community

Recommended Posts

I really hope it's worth it scandy.

Remember back to the early release blurbs about how the integrated bov, boost control solenoid and IW housing options were supposed to make it easier and cheaper to fit one!

So do I mate. Got the bill from Andrew today for the manifold and all the rest. So far this exercise has set me back around $4k... Not bad for something that started out as $100 modify and replace project.

So do I mate. Got the bill from Andrew today for the manifold and all the rest. So far this exercise has set me back around $4k... Not bad for something that started out as $100 modify and replace project.

LOL ahh... cars.

"and all ill have to do is change this $5...... $5,000 part" lol yep.

I sold my last car and bought my current car complete, every mod I wanted. Now it only has scraps of the original setup left as nearly everything needed to be redone lol.

Keen to see your results tho, Its a nice kit up you have going :thumbsup:

Pretty well.

More shit. Car came home tonight.

Intake;

IMG_9012.jpg

Starts at 3" and necks down to meet the 2.5" (?) intake. Trying to source a Pipercross filter with a Z32 mount. Then it's back to Andrew for any necessary mods, and to make up a decent bracket and close it off.

IMG_9011.jpg

IMG_9010.jpg

Lobster back hot pipe. Complicated little thing. 12 pieces.

Both will likely get coated wrinkle black to match the rest of the pipework.

And finally, the dump pipe.

IMG_9013.jpg

I'll have to find a bung for the o2 port. Only there for tuning. I won't be running a sensor.

The dump, pipe, and cat are all 1 piece. So I only have 2 flanges in the entire system. Lovely.

Oh yeah, if anyone in here knows their wiring and SR's, specifically ignition, shoot me a PM.

  • 2 weeks later...

This thread started 16 months ago..

I want a 8374. But I'm not prepared to wait for the next decade to get it..

What the Fire trUCK is going on..

Well i got my full race mani and BW 83/75 s300sx turbo in about 2 months, and it was only that long because the mani was made to order

Is there some sorta mad waiting list for the EFR's?

production issues actually, havent you read the thread start to end?

no point being interested if you havent

Yea righto mate

I've read the thread and know there's issues, just can't believe there's still a massive wait on a turbo that bearly anyone has..

There's was meant to be a "still" somewhere in my last statement :thumbsup:

lol i guess the 'still' would change everything.

i would assume BW arent in a big rush to roll them out anymore because of the prior issues. they are more likely to provide to a smaller client base for testing (workshops/race teams).

these are still on the map for me but as selfish as it is i want to see more results that show they are more phenomenal than the competitors.

Its very frustrating.

I've wanted one of these since I heard about them..

My other options BW s300 8375.. Bullseye S362 (virtually the same thing) or a gt35 with divided t4 housing.

All of which are proven performers.. And are all roughly the sme money delivered to my door..

Just not sure which would be the best on a daily street driven 1.5j.. :blink:

Just saw this too.. New for 2012.. looks like it could be a better option.

http://www.full-race.com/store/turbos/borgwarner-airwerks/borgwarner-s300sx-fmw-turbo.html

Edited by --Redwork--

Awesome, keen as to hear how that goes... Whats the rest of the setup?

2.6

Ross crank trigger

Link ECU

aftermarket ignitior (cant remeber what brand) need it to run with Link

sard 800s

Full race twinscroll manifold

260cams

Koyo intercooler

Jun pump

adj cam gears

4 inch dump with high flow cat into 3.5 rear

Just saw this too.. New for 2012.. looks like it could be a better option.

http://www.full-race.com/store/turbos/borgwarner-airwerks/borgwarner-s300sx-fmw-turbo.html

Both the 83-75 and the FMW are excellent bang-for-the-buck, great power and incredibly reliable. The FMW turbo is basically the "new for 2012" version of the S300SX 83-75. it uses an EFR 8374 compressor wheel combined with 2 different blade shape turbine wheels depending on what the application is. here is a photo of the comp wheel:

borgwarner-s300sx-fmw-turbo-1.jpg

our customers who cant wait for the EFR 8374 are generally using this turbo

Edited by Full-Race Geoff

Both the 83-75 and the FMW are excellent bang-for-the-buck, great power and incredibly reliable. The FMW turbo is basically the "new for 2012" version of the S300SX 83-75. it uses an EFR 8374 compressor wheel combined with 2 different blade shape turbine wheels depending on what the application is. here is a photo of the comp wheel:

borgwarner-s300sx-fmw-turbo-1.jpg

our customers who cant wait for the EFR 8374 are generally using this turbo

So benefits in response and top end in the new wheel design?

Can it be bought and swapped into a 84/75 housing Geoff?

Looks cool to say the least

The S300 FMW shares the identical turbine housing to the s300sx 83-75, 84-75 and 88-75, so yes you can share the turbine housings. the compressor housings you can not swap however.

if you decided to get one, i would suggest to get it with a different housing A/R and different blade shape than the turbo you currently have. the reason is that BW balances the non-BB turbo components individually, this allows you to mix and match between turbine wheels and housings on your turbo, without the need for a rebalance. these S300 turbos are extremely easy to disassemble and swap a turbine wheel on, just 2 wrenches on a left-hand-thread is all it takes

Edited by Full-Race Geoff

So to confirm iI could keep my turbine housing but I would need to swap out the compressor to match up with the new wheel design?

Is there any back to back testing of the old wheel design vs new?

So to confirm iI could keep my turbine housing but I would need to swap out the compressor to match up with the new wheel design?

Is there any back to back testing of the old wheel design vs new?

BTW id be keen to do some back to back testing of the new wheel if i was to be supplied with one :whistling:

i got one of your Full race manifolds as well :thumbsup:

Edited by GTR_JOEY

So the compressor housing can't be swapped because the inducer size of the wheel is bigger... Yes.??

Comparing the 2 compressor maps it looks like the new wheel moves more air even at low boost levels.. But I'm no expert at reading comp maps... :wacko:

So to confirm iI could keep my turbine housing but I would need to swap out the compressor to match up with the new wheel design?

Is there any back to back testing of the old wheel design vs new?

You keep your existing turbine housing but its a new CHRA.

The compressor is different and uses a different housing to suit, yet the turbine can use the exiting 75 housings despite being different.

My take on it is you can buy both the front and rear wheels along with a compressor housing and put it all together yourself.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...