Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

*yawn* tomei is the way to a broken bank balance, and this guy doesn't have all the money in the world.

IMO you are best to get a set of CP or Wiseco pistsons mate for what you are trying to build at present.

Best compromise between price and quality and have been proven in a ridiculous number of 350-400rwkw+ setups.

i got my TOMEI pistons for 1600 if that makes you feel better

Being that you can get CP's outta the states for under 1000 bucks.

Its kind of a waste spending 700 more on "allegedly" better pistons, yet no real evidence they are better than anything else on the market.

  • 4 months later...

I'm using them in a 26/30 with no problem.

They were more expensive than most others when I bought them a while back. Supertech make some high end ie F1 gear from memory. I agree with what's said above, clearances etc are much more important than the value of picking one piston over another, and the well known brands have all proven themselves.

Edited by Scooby

yeah they are good but like dave said the jap stuff is not just pretty packaging. the tomei pistons in my engine are so quiet you wouldn't know it's forged. zero piston slap even when stone cold and they can handle plenty of power like any other piston. I do agree they are not the best value though being quite expensive compared to other chinese and US options but there are certainly not a waste of money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...