Jump to content
SAU Community

Recommended Posts

hi guys its not a skyline but it is will be rb powered. Roughly 6 years ago i bought my self a 1973 240z

I bought it with plans to do a full restoration and rebuild for a tough streeter with the occasional track day.

I origonaly planed and had the gear to build it with an l28et which isnt a bad thing because they can be very power productive with the right set up.

but i recently found a compleat rb20det and every thing i need except the fuel pump set up to get it running in my s30 hence the reason i am here on this forum

Here are are some pics with with where i am at with the build

this is how it was when i bought it

000_0115.jpg

i had the dash redone by rear spares

100_1981.jpg

i bought some willwoods

100_1981.jpg

100_1982.jpg

cleaned up the suspension

006-1.jpg

012-2.jpg

IMG_0255.jpg

I did a lot of body work and rust repair including replacing the roof skin to get rid of an unwanted sunroof

007-7.jpg

001-11.jpg

fit up some fender flares

028.jpg

030.jpg

006-8.jpg

off the rotisserie and a panel fitments before doing finishing off the body work

IMG_0330.jpg

and finally my rb20 waiting to be fitted up

IMG_0427.jpg

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/
Share on other sites

im a little bit far away from you. I am in south australia You should get your self another zed to play with.I sold mine to buy an r32. I missed it so much i sold the r32 to buy another zed. I would not swap it for any thing. Just today i had some one wanting to swap it for a late 90s, bmw. I told him hes dreaming :)

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/#findComment-5530953
Share on other sites

  • 5 months later...

thought i should do a quick update and show you where i am at

here she is getting some sun on my front lawn

IMG_0660.jpg

thought i should fit up the intercooler before i paint it

there was not much to it the pipes lined up with the factory vent holes..

I just had to make them a fraction bigger

IMG_0722.jpg

IMG_0728.jpg

IMG_0726.jpg

I now have it at the crash shop were i work awaiting primer so its not far

from paint..

It is a shame that these rims dont fit as they are 5 stud and came off my bosses GTR

If any one wants them they are for sale

IMG_0756.jpg

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/#findComment-5775124
Share on other sites

  • 3 months later...
  • 1 month later...

Hi guys.. Its been a while since i posted so this is were i am at.

I got some rims they are rota rbx in 17x 9.5 for the rear and 17x9 for the front.

I managed to get some time in the spray both to spray some high fill primer on all the panels. now i just need to block it back and wet rub it

and it ready for color

IMG_09131.jpg

IMG_1008.jpg

IMG_1030.jpg

Link to comment
https://www.sau.com.au/forums/topic/342533-rb-240z/#findComment-6036144
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...