Jump to content
SAU Community

Recommended Posts

sad day at the stagea camp...

^^^ truth.

Hope it all works out for the best Rodney. Just wish Id known you and your car prior to this, never mind. What are your car plans after this is all sorted?

Yeah was found Tuesday

got a couple of ideas for the new rig,all I will say is that watever it is,it's gonna be rocking straight pipes again

I will be back in something equally as unique as my stagea (was)

Had mine written off

just cars must have rang Nissan or autech for a price on new 260rs sideskirts

ouch...

$$$$$$$$$$$$$$$

If you can buy the wreck at a good price (assuming most of the components are Ok) you could get yourself an RS4T and transfer all the good bits over.
I guess in a sick way, now it looks like your Avatar! ;)

At least you got it home I guess

lot more smoke than that LOL......yeh went a got the car trailer!

Cop's(hwy) turned up while I was loading it.

Stupid question from them too as I was winching the car into the trailer:

Cop "What are you doing?

Me "If I have to spell it out bud there's a problem"

Cop "I asked you a question!"

Me "winching my car into the trailer officer :) "

Cop "are you being a smart arse?"

Me "I tell you what bud.....why don't you tell me what you would like me to say!......I don't want to be Captain Obvious here but really....what the f#$K do you think I am doing?"

Cop "Is this you car?"

Me Just answered that! :( "You want to buy it?

Dad " Craig shut up and keep loading the car I'll talk to the officer"

Me "Good idea.....I'm not dealing with fools very good ATM!"

Cop "Excuse me!"

Me " Yup you are!"

5 minutes later

Dad "Alway's have to be a smart arse don't you"

lot more smoke than that LOL......yeh went a got the car trailer!

Cop's(hwy) turned up while I was loading it.

Stupid question from them too as I was winching the car into the trailer:

Cop "What are you doing?

Me "If I have to spell it out bud there's a problem"

Cop "I asked you a question!"

Me "winching my car into the trailer officer :D "

Cop "are you being a smart arse?"

Me "I tell you what bud.....why don't you tell me what you would like me to say!......I don't want to be Captain Obvious here but really....what the f#$K do you think I am doing?"

Cop "Is this you car?"

Me Just answered that! :D "You want to buy it?

Dad " Craig shut up and keep loading the car I'll talk to the officer"

Me "Good idea.....I'm not dealing with fools very good ATM!"

Cop "Excuse me!"

Me " Yup you are!"

5 minutes later

Dad "Alway's have to be a smart arse don't you"

keeps lube in glove box for next time plod sees car on road

ow unlucky, hopefully just a seal and you havent sent an exhaust wheelll through the works.

spent yesterday arvo, and all day today cleaning the InsIDE of my car. took off all the seals, cleaned and conditioned them, cleaned all the doors and door jams, sunroof seals etc, hit all the furry stuff with upholstery cleaner.....it was an epic battle. also relocated the gizmo EBC from out of the glove box where it was rattling around, to just under the headunit. need to hook up a kill switch in the event that i get pulled over, but looks trick.

next weekend it will be exterior, and weekend after that, engine bay and underbody - but i'm slowly getting there! it'll be mint once its done.

question, does anyone have trouble with the rear sunroof not sealing up? it looks like the rear edge of mine could go up another 2-3mm - and i reckon it's letting water in. it tends to fog after a wash with the high pressure hose? tried to manually wind it a bit further, but wouldnt budge.

smokey... ive had this drama with mine b4.. passenger side at the rear, or the rear sunroof??

a guy on here put a little plate in his to hold it up... as theres no adjustment for close height as far as im aware... if there is its maxxed out.

do a search and u will find what im talking bout :D

sounds pretty similar chef. mine is on the drivers rear, and it's not letting water into the car - but there is enough of a gap for me to tell that it would be sending water down the guttering rather than letting the seal do it's work.

i found this: http://www.gtr.co.uk/forum/104404-leaky-body-sunroof-2.html

sounds like what you're talking about, did you do the same on yours??

got my alignment done

can someone have a squiz and tell me if the messed anything up?

i asked him to dial in as much caster as possible and he seemed confused and said "i don't think you will notice that on road tyres mate"

Thanks

post-51118-1284962344_thumb.jpg

got my alignment done

can someone have a squiz and tell me if the messed anything up?

i asked him to dial in as much caster as possible and he seemed confused and said "i don't think you will notice that on road tyres mate"

Thanks

Faark dude, even with my best squint I can't read that properly, hope someone's got better eyes than me. I'll have 6 beers and come back to it.

Around +5 deg 22" left, +4 deg 41" caster; -1 deg camber and +0.5mm toe was optimal on my old r31, and it needed camber/caster adjustable strut tops to get there; obviously there'll be some differences given the rear can also be aligned. How were they adjusting the caster? Are your caster rods adjustable?

On my NM35 they're not...

Edited by Daleo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...