Jump to content
SAU Community

Recommended Posts

Can someone Part number me??

I need the rear spring Cradle(arm) bushes.

Front right arm boot? (someone give me a name)

and most importantly, the link that holds up the Sway Bars for the rear. one of mine snapped, so we found out yesterday.

All for an 2003 ARX(dont know if it would be any different, doubt it)

Cheers.

SEC 275 is a reference to which section in FAST the part is located (Section #275), and really helps when navigating the pictures.

The 11925M is a FAST part reference but not the actual part number.

Anyway, here is the pic for section 275, so I can only presume that the assembly highlighted is what you are after (although it does look a little small in the pic).

post-31842-0-83623500-1293063296_thumb.jpg

You can see below the illustration that there are two part numbers for this assembly

11925-AG300 and 11925-AG30A.

Only 11925-AG300 brings up our VQ25det in Parts Master so go with that, although it may have been superseded by the 11925-AG30A part which brings up VQ35de and VQ25dd, ie series 2 M35's.

Had a few nice long runs over Christmas, I get over 400ks to 70L of Caltex Ethanol on freeway cruise with the occasional squirt. Also found the Lilydale Caltex Eflex pump is installed. :thumbsup:

Merry Christmas... :cheers:

might have sold my sprinter finally... will see, have 3 people very "keen" will believe it when i get the cash but.

then intercooler, fuel pump. go on holidays and then ecu and new turbo/gate set up

SEC 275 is a reference to which section in FAST the part is located (Section #275), and really helps when navigating the pictures.

The 11925M is a FAST part reference but not the actual part number.

Anyway, here is the pic for section 275, so I can only presume that the assembly highlighted is what you are after (although it does look a little small in the pic).

post-31842-0-83623500-1293063296_thumb.jpg

You can see below the illustration that there are two part numbers for this assembly

11925-AG300 and 11925-AG30A.

Only 11925-AG300 brings up our VQ25det in Parts Master so go with that, although it may have been superseded by the 11925-AG30A part which brings up VQ35de and VQ25dd, ie series 2 M35's.

I chased this up with my mate that orders my parts, he said that the AG30A supercedes the AG300 - so either will work fine. It'd be a 3-4 week wait if I ordered it though.. May have to see someone has a broken motor that they're willing to part out :O

Jason Don`t FORGET THE PORT DUDE :thumbsup:

and other essential recreational drugs of interest. just a few quick snaps from our chalet near the walpole national park inlet. we went as far as peaceful bay, walpole, denmark, margaret river, yallingup and geograph bay in 5 days. was awesome. stag did well on the twisties.

btw ppl, south western highway near pingerup is in shite condition, needs resealing. we bypassed Busso bcos of heaps of piggaz for Southbound festival.

anyways, off to freo this arvo to chill out to xavier rudd, should be mellow as fark. which my head is sayn is a good thing. lol

imgp0548copy.jpg

imgp0544copy.jpg

imgp0543copy.jpg

so less :whistling: Bullshit did you get any PORT :wacko:

nah charles. but a endless bottle of rare breed was downed at leisure. lol @ your -4 reputation meter bro.

ive come to the conclusion that xavier rudd is mother natures gift to humanity. concert was uber chilled and it was choice having a picnic dinner whilst watchn the sun set in freo with a few little creatures ales in hand. i really enjoyed "come let go" but "my missing" had to be song of the night. decent atmo, no long bar lines, no agro and even a smokers area. well organized event.

Edited by dirtyRS4

well got a 3 grand deposit down today, just have to wait for the rest of the cash to come through!!!

didnt realise you were in perth. getn rid of the ae86 mustv been tough. 3 grand in the hand is 3 grand in the hand though. imo get the rest & spend it wisely.

Edited by dirtyRS4

:spank: Jason NOT PORT :spank:

but a endless bottle of rare breed hope that was KEPT IN ICEBOX :whistling:

with have to sort out a Chesse&port night :thumbsup: ,se if i can edumocate you aussies :3some:

as you can`t PLAY :P CRICKET :rofl2:

  • Nope 1

didnt realise you were in perth. getn rid of the ae86 mustv been tough. 3 grand in the hand is 3 grand in the hand though. imo get the rest & spend it wisely.

yeah another 3 grand this weekend for it, got snapped up quicker then last time i posted it. and it was an ae85 btw :P but i had done a bit of work, only lost 1g on it so yeah its not so bad...

yes well bought the cooler today, rang up hyperdrive and got a quote for fuel pumpage and installation of said intercooler.

i get paid again this week and we just got our old house bond back, so.... money has gone into savings, now i just have to figure out if i want to go nistune, omg finding a stock fking ecu so i can get it chipped is proving to be difficult. and what turbo setup i want to go.

dont want to spend to much time in the shop.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...