Jump to content
SAU Community

Recommended Posts

make Redbull and Vodka your friend!

lol close mate.

Fast flu relief is easy.

1x 400ml glass

Pour in 350ml Jagermeister

Pour in 50ml Redbull

Drink over a maximum of 5mins.

Wait 10mins

Repeat until unaware of flu :thumbsup:

lol i knew someone would say that

however, im not saying im being unfairly punished. i just dont want to pay if i dont have to.

if i dont do MY job properly, i dont get paid

Yeah, not having a go Iain; but I do more than I get caught for; so I tend to cop it if I was doing the wrong thing.

The rules seem to be pretty different for the Police though; I was handed a fine that listed my Missus car with an incorrect plate, incorrect vehicle and the wrong offence. I queried it with a traffic law specialist; and none of the faults were considered "Fatal errors" (details that would make the ticket void), because they handed the ticket to me.

I was "caught" overtaking on an unbroken centreline, by a police car following at a distance of at least 600 metres. Supposedly they had me "Dead to rights" on the incar footage.

I flat out denied the charge (NOT recommended) as I had completed my overtake before the unbroken line had ended; which he would have known if he'd been in the same suburb as me.:rolleyes:

He went off his brain when I requested a viewing of said footage; knowing full well there was no way it would show me committing the offence. He refused at the scene (what a shock!) and I had to request an appointment to view it at Green Valley HWP headquarters.

I subsequently attended and met several very accomodating HWP officers who showed me around their HQ while they found the footage of the "incident".

They have walls COVERED in photographs of of "illegal" modifications to all manner of performance cars; so they can spot them at a glance, which is why I always laugh when people do the old "nah mate, it's all stock" and are then shocked when the Police give them a defect.

If you want to fly under the radar; don't own a WRX, S13, S14, S15, R32,R33 or R34 Skyline; 90% of the pics I saw were of mods to these cars.

Aaanyway, when we viewed the footage; you couldn't see a farkin' thing! My missus car was a tiny speck in the distance, and they followed me for a further 7 km before doing anything. Then, they performed an overtake across an unbroken centreline :whistling: and took off after me with lights and sirens going 240km/h (according to the speed data on the tape), and pulled me up. The officers watching, said they wouldn't have even bothered, and when told who the issuing officer was; they all exchanged a knowing glance and informed me he was quite "overzealous".

When it became obvious that there was no "evidence" of my illegal overtake on the tape, I told them I'd be contesting the ticket.

They then told me that it still didn't matter as it would be my word against two Police officers; guess how that ends.:spank:

So basically; They would stand up in court; effectively lie, and I'd be found guilty. Left a bit of a bad taste in my mouth; but meeting some normal HWP officers (actually all drove some kind of performance car, and didn't treat me like a crim) allowed me to see that they're not all like that one.

As an aside; the tape shows me doing 102km/h in a 100km/h zone, for a few seconds; and if viewed in court; would be added to the list.

If you've ever wondered why officers reduce (round down) the speed on a speeding ticket; it's not because they're being nice. It's so they can have a few other goodies in the bag if you do decide to take it to court. All they have to do is refer to their notes (and trust me, they write down the actual speed); it becomes fact.

I paid the ticket, and moved on.

Edited by Daleo

So, i recieved a ticket in Coffs Harbour for performing an illegal U-Turn.

The officer didnt fill out the ticket correctly.

Should I dispute this?

Perhaps the wrong question; what can I do to dispute this? Do I need to take it to court? Or will a letter suffice?

Its not a spelling mistake, he has incorrectly filled out some essential fields to do with the date and the fine code. IMO, making the ticket null and void as these are fairly important.

cant get out of it that way they just ammend the fine to the correct details :(

Too many Chubbys over cameras on here. Got to try to save topic...

So, the thermo fans stopped working in my shopping trolley. So I check if the fan works- yep, bridged the gap over the relay and sure enough the fan comes on. That makes me think, OK, the relay must be a bit sus. Zip down the auto store - "no nothing like that here" over to mazda and shock/horror /almost fall over at the price- LA10 - bascially a 4 pin 10A relay (like the size of a 50c coin!) $68 or $73 from Ford parts. Not a lot of choice in the matter - so I get one in. Plug in, doesn't fix the problem. Fan don't work.

Turns out its the Coolant / fan temp sensor- $35 from the auto store. My next guess was right. Fit it, works perfect- change /flush coolant- everything a source of joy.tongue.gif

Which leads me too- What is the most ridiculous price that you have had to pay for a tiny/cheap part?

Too many Chubbys over cameras on here. Got to try to save topic...

So, the thermo fans stopped working in my shopping trolley. So I check if the fan works- yep, bridged the gap over the relay and sure enough the fan comes on. That makes me think, OK, the relay must be a bit sus. Zip down the auto store - "no nothing like that here" over to mazda and shock/horror /almost fall over at the price- LA10 - bascially a 4 pin 10A relay (like the size of a 50c coin!) $68 or $73 from Ford parts. Not a lot of choice in the matter - so I get one in. Plug in, doesn't fix the problem. Fan don't work.

Turns out its the Coolant / fan temp sensor- $35 from the auto store. My next guess was right. Fit it, works perfect- change /flush coolant- everything a source of joy.tongue.gif

Which leads me too- What is the most ridiculous price that you have had to pay for a tiny/cheap part?

Powerduct....$174...owned!

made mine for under $20 of materials :P

Stole (sorry; appropriated) my materials from work, used their TIG, and got paid cos I did it on their time!

Like a baws...

Edited by Daleo

$340 for an OEM Mazda engine mount. If I purchased the set of four; total cost would've been over $1200...

Probably should clarify; these are prices I've refused to pay...

:stupid: :Not only but also...On the back of a Driving School car

"I apologise for driving too close to the front of your car"

Edited by 66yostagea

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...