Jump to content
SAU Community

Recommended Posts

for those plugs, you should leave them at 1.2mm unless you are getting a miss at high boost. The bigger the gap the better the burn, people only gap them down when the spark is not strong enough at high boost.

good idea to check stuff out early....can't say I've ever tried that :wacko:

  • 1 month later...
So, my EOI entry for WTAC has been accepted smiley.gif guess they need some back markers to liven things up haha

Have some work to do in the next few months to bring it up to standard.
Can anybody tell me what the lowest weight "manufacturer's original specifications" for a HR31 is? Im allowed to have upto 15% less than that.

Got started on the weekend. As im going to be very under powered in open, my goals are;
-make better use of what the car already has
-make the car as reliable as I can
-have as much fun as I can. smiley.gif

Plans so far…

I don’t really want to pump any motor power through the motor as isn’t a built motor and I don’t have the cash to build one between now and then, So ive ordered a few bits and pieces like 25% under driven balancer and lightweight flywheel with arp bolts to free up some power. will aslo be getting retuned as well

I have a 9l gated sump to go in, heat shields, new wastegate diaphragm and lines, new turbo beanie as the last one is falling apart.
Spare exhaust manifold (old has cracked again) Im redoing the exhaust (this time side dump and screamer) to clear up the back end for the diffuser and save a bit more weight.

getting ready to pull the motor. also sort of how the exhaust will sit, basically just flipping it over cutting the end off and adding a bend to go out the side.
2013-06-16171133_zpsdbc3bb62.jpg


The splitter and side skirts are going to be dropped down to around the 70mm height rule, just with sheet alloy. Wont look pretty but should help.

The hydro is going too, as It makes bleeding a bitch.

Front guards have been spaced out 30mm help stop wheel well turbulence, don’t know if it’ll work but looks cool tongue.gif and i'll be making some bracing for the engine bay/firewall here too.
Was pleased to see little/no rust

2013-06-16171244_zpsd6951a66.jpg



Bum cut out

2013-06-16104240_zps431fd59d.jpg



And Ive bought a spare set of axles of Tir31 biggthumpup.gif just in case.
  • 2 weeks later...

Got a little done on the weekend.

Putt the fittings put on to the new sump and fitted the ignition cut off cable. I’ll get some pics later..

Bit of weight reduction…. Im tiding up the bay while the motors out, bit of paint, fixing up some wiring and general messiness.


2013-06-30161038_zps0d2ddb4a.jpg


Cut out the radiator support panel for ease of removing the motor, knocked up a new one and some air guides for it too.

Not finished yet but you get the idea. Need to do something for the top of it too.


2013-06-30122807_zps1b947623.jpg


Old vs new flywheel

2013-06-30150437_zps12e51ea5.jpg


Im also going to put on some 25 cam covers I have, and am tossing up wether to paint them red again or black. or yellow. lol any votes?



boat anchor

2013-06-30150500_zpsfab76363.jpg

Well, im feeling quite loved atm :) Fatz the top bloke he is has started a thread to help me get to WTAC. And so far has raised a heap of the folding stuff, help and even a sponsorship deal with Australian & Japanese Dismantlers for a set of tyres.

This has really taken huge burden off me and I am really grateful for the generosity shown by the members of this club, Thanks heaps everyone! :)

Engine bay degreased and a lick of paint to make it feel pretty. New cam cover gaskets have rocked up today, so tonight I’ll prep and paint the 25 cam covers.. the extra volume should help keep a bit less oil making it to the catch can.

2013-07-06151924_zpsfecb09ff.jpg

2013-07-06151941_zps70a8fc2e.jpg

I put on the modified sump (think its about 8l with gates) and new balancer (which is tiny). Also a new timing belt and tensioner while I had easy access.

2013-07-07150216_zpsaee5401a.jpg

Just waiting on one more fitting for the new head drain hose, then I’ll slap on the flywheel and put it back in the car.

Ok, I have a little question.

My current exhaust manifold has cracked (again) and I don’t really want to re-weld it.

I have two options, either buy another and keep the same setup or use a Twin Scroll manifold (has two old HKS wastegates) that I already have but will need to buy a new turbo housing for.

It should be about the same cost, just a little more work to go T/S

The turbo is T3 atm and the T/S mani is T4

What are peoples opinions?

I would put a steam pipe single scroll mani on it. Your putting in a lot of effort to make the event, would be a shame to have a thin wall ss manifold crack or old waste gate fail on the day. TS would be nice but it comes at a cost.

I have decided that the money from the donations will all go towards tyres. I'll do a sexy poise on them when i get them :)
This has freed up enough money that i was able to replace the manifold rather than weld up the cracks again.

Its a one of the Mild steel jobies from Hybrid in NZ, the quality is actually pretty good (better than the chinese one) I didnt get a pic but its all smooth in the collector and the face of the flanges (thick too) a straight. It puts the gate futher away too, which i think will help with the diaphragm issue.
Also rerouted the water return, put the new beanie on and have use silcon hose for the wastegate.

2013-07-16180618_zpsede3ecaf.jpg

2013-07-16180635_zps3a9b1e1c.jpg




New oil drain from the head to sump

2013-07-16180701_zpsa043dbb9.jpg







I have also finish painting the new cam covers. dont you judge me...




YELLOW!!!

I think it'll look good in an all black engine bay. Ive painted the strutbrace and boosted stopper i made black so they dont stand out too much.

2013-07-17104359_zps57cb937f.jpg




2013-07-17104415_zps91b259ee.jpg



2013-07-17104118_zps54fe7e00.jpg




I'll put the flywheel and clutch on and hopefully have it back in the engine bay this weekend.

What do people think of Royal Purpal oils? thinking of trying them as im a sucker for advertising

What do people think of Royal Purple oils? thinking of trying them as im a sucker for advertising

I've used all the top oils, even the $50/l stuff and they all effectively work the same....basically none of them provide significantly better protection and performance than each other.

Obviously use synthetic, change it often, and make sure it doesn't get too hot. But don't worry too much about which brand

ok, no worries. cheers man

thanks guys, the CAS isn't polished. its a modified one thats been ceramic coated inside and out. i was given it a while ago, but haven't been sure how to setup the Vipec for it (has 32 hole wheel). ESP's job :)

been meaning to get back out there for awhile now. but, yeah after s/l

will be interesting to see time difference, it was my first trackday with the 30 (220kw) and reallllllyyyyy old 225 wide 595RS's.

got a bit more done on the weekend

Motor back in
2013-07-21171136_zps06299464.jpg




guards are back on too, and have been spaced out.

not sure how much benefit there will be for a box shaped car but it didnt cost anything and hopefully will help.

2013-07-21170505_zps7c89c489.jpg






kinda cool without a front on it

2013-07-21171214_zps107cf3af.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...