Jump to content
SAU Community

Recommended Posts

The time has come to travel our most favoured road again.

Yes, the Great Ocean Road Cruise to Apollo Bay is on again.

Here are the crucials...

1stly.

You must have a full tank of fuel before arriving at your starting meet

point. This will help us depart at the desired times. It's going to be a

big day so not wasting time filling up is pretty important. We had a

problem with this last time with people having to take stops on the way

and thats a pain in the ass.

Ok, onto the details.

Date: 28th Feb 2004

Meet points/Times:

Western Suburbs R3Nismoids Group

Meet at 9.00am - Departing 9.30am

Mobil Service Station on the Ring Road

Eastern Suburbs Snowmans Group

Meet at 9.00am - Departing 9.30am

MegaMart Carpark off Warigal Rd

Melways: 69 G2

Geelong Meet Point ECR33's Group.

Waurn Ponds Hotel

10.30am Departing 11.15am

Melways: 229 B5

Basically, taking a nice leisurely drive down to the GOR.

The run down to Geelong is going to be a slow smooth one to avoid the

fixed camera's that are down there now.

We'll meet on the far side of Geelong, so that we can just get everyone

through without loosing people like what nearly has happened before.

Once the Melb crew's hook up with the guys at Waurn Ponds hotel just

outside of Geelong, we'll avoid the first part of the GOR, and Torquay.

This means we will go down Anglesea Road.

This is 200m from the hotel itself

After that, it's a glorious run down to Apollo Bay. Where we'll

grab some lunch etc and go for a few photo points etc etc. And then a

route home can be discussed.

I have a special home route that we've taken in the past that everyone

seems to like for some... odd... reason... So we'll more than likely

take that route back to Geelong. Basically it goes through the Otway

Ranges, and have a excellent mix of corners and straights

Hope to see everyone there.

If you wish to have my mobile number just in case something happens,

please send me a PM and i'll send it off to you.

:cheers:

ash

Link to comment
https://www.sau.com.au/forums/topic/34324-28th-feb-great-ocean-road-3/
Share on other sites

  • Replies 150
  • Created
  • Last Reply

Top Posters In This Topic

If anyone for the South/East pre-meet needs my mobile number please PM me.

I know there are a lot of us coming from a fair way down from the pre-meet point but the idea of meeting there is that it's a very short trip to the freeway so there is a minimal chance of spiltting up the group.

:cheers:

Andrew

Took my car out on the weekend and at 4K, in second gear, the clutch is slipping :). Has been booked in for the 01/03/04 :rofl:. Would REALLY appreciate a lift with someone, i could be the photo-boy :P, and keep tabs with the 2-way radios.

Please PM me, if a "shot-gun" seat is available :). Willing to drive the company van to anyones house and leave it there.

Thanks

Alan

I think I'll be in attendance too... meeting at Mega Mart.  In terms of fuel, might be wise to top up in Geelong.

Yeah. We got that planned.

i just didnt put it into the orig post to try and keep it short.

Probably just outside Geelong.

I'll be in touch with Snowman on the day. So we'll work it out when we come to it :wassup:

Took my car out on the weekend and at 4K, in second gear, the clutch is slipping :D.  Has been booked in for the 01/03/04 :(.  Would REALLY appreciate a lift with someone, i could be the photo-boy :P, and keep tabs with the 2-way radios.

Please PM me, if a "shot-gun" seat is available :D.  Willing to drive the company van to anyones house and leave it there.

Thanks  

Alan

You're welcome to grab a lift with me but I'm in the Fairmont! I'll be there, taking heaps of photos and trying desperately not to hold everyone up.

You're welcome to grab a lift with me but I'm in the Fairmont! I'll be there, taking heaps of photos and trying desperately not to hold everyone up.

There will be LOADS of time for pics.

Dont worry.

If you want a few more, just tell Snowman/myself and we'll hold up for another 5-10 mins.

More pics the better, especially before MAS.

Hmmm.... I supose I'd better get me one of those cb radio's. Where do I go for those?

And I MAY have a shot-gun seat available. But won't know until closer to the time so don't want to make any promises as yet.

I'll check mine tonight... but i'm 99% sure they are UHF or whatever it is.

Just the Uniden/GM ones etc you can pick-up from Dick Smiths etc for like $80-$120.

The cheapest ones (uniden) are pretty average for the $80 one though.

If your looking for a radio. Go here http://www.prestigecom.net.au They ship same day as order is placed. It arrives from perth to your front door overnight. (Mostly) UHF is the way to go. Don't waste your time and money on AM CB.

I'll cyas all at SE meet point. Looking forward to it.

Also don't buy Digicor, Digitalk, Digiwhatever hand helds. I was a sucker and wasted my hard earned cash. Go the extra $20 and buy uniden. Also 5watts is stronger than 2w and Grounded in car radio is better than a handheld.

Guest RedLineGTR

Maintenance is also important road trips etc, make sure your car is up for it we don’t want to be calling RACV out to get people towed home, it would really be a shame. So make sure all fluids are topped up, tires checked (tread and pressure) just general stuff to make it better for your car and your enjoyment.

I might not be there as my car isn’t ready, I’ll see what I can do about some sort of lift but I’m sick of bothering people. Hopefully everyone has fun, no cops….well lets hope. Cheers Rob

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...