Jump to content
SAU Community

Recommended Posts

actually....I think time attack should adopt the CAMS supersprint regs - afterall it is a cams supersprint! These regs allow for type 5 already for cars which are above sports sedan spec like Duncan's R35.

Protecting existing entrants is about the best way to become irrelevent as your potential entrants change. AASA are havnig a field day with this in racing and no doubt that will reflect on sprints in the future too.

BTW while we are changing rules - I reckon the sooner NSW adopts the QLD distinction between "sprint" (ie best timed lap) and "supersprint" (best total time for 3 laps from a standing start) the better. It is indeed an excellent step between sprinting and racing, and would reduce the incidence of cars being developed for single flying laps only, allowing them to be more versitile and encouraging their owners to enter other types of events.

  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Like I said earlier, it would be better if they adopted time attack style classes with RWD, FWD, AWD, TURBO, N/A as well as engine capacity.

Plus I agree with Stuart and Duncan about the lack of consistency across different states and competitions. CAMS is a national governing body isn't it?, why then is there different rules for different states?

That only works for Superlap because they don't allow open wheelers, clubman type vehicles, or CAMS 2A style sports cars etc. You need to seperate the Clubmans from proper full bodied production cars. It really is no contest.

I don't see the need to seperate RWD and FWD. Neither is conclusively better than the other on racetracks. The real distinction between 2WD and AWD. AWD is a distinct advantage.

This would be my suggestion:

Our AASA sprint classes up here are very, very simple. Road 4, Road 6, Road 8 and Race.

You have to be road registered and using road legal tyres to be in the road categories. Anything unreg or on slicks goes into Race category. The numbers denote number of cylinders. Turbos go up one category, so a Turbo 4cyl is in Road 6.

Rotaries are classified as Road 6, which means turbo rotors are Road 8.

The only thing you might want to do is maybe apply some modification limits as seperate classes within those categories. Eg Road 4 Limited Modified, Road 4 Modified etc. Sort of stealing Targa's idea. That might help keep the old-school supporters of the Type classes somewhat happy... You could also use Targa's list of factory high performance vehicles that go into MS even if they're stock, and push modified examples of them up to Race instead of Road classification.

Add a category for kits cars/clubmans/2A sports cars as you have already in NSW (which is a really good idea) and maybe expand it to include other seriously modified light sports cars - eg if you have a sub 1000kg sports car with both an engine swap and supercharging device (incl turbo), like the supercharged Honda powered Elises or turbo SR20 MX5, as random examples lol!

Maybe add a Road AWD category, or just include a trophy for fastest 2WD???

And do something within the Race category to break it down a bit. Over and Under 2L for example?

You'd end up with:

Road 4 LMS & Road 4 MS

Road 6 LMS & Road 6 MS

Road 8 LMS & Road 8 MS

Road AWD LMS & Road AWD MS

Clubman/kit car U2L & O2L

Race U2L & O2L

actually....I think time attack should adopt the CAMS supersprint regs - afterall it is a cams supersprint! These regs allow for type 5 already for cars which are above sports sedan spec like Duncan's R35.

Protecting existing entrants is about the best way to become irrelevent as your potential entrants change. AASA are havnig a field day with this in racing and no doubt that will reflect on sprints in the future too.

BTW while we are changing rules - I reckon the sooner NSW adopts the QLD distinction between "sprint" (ie best timed lap) and "supersprint" (best total time for 3 laps from a standing start) the better. It is indeed an excellent step between sprinting and racing, and would reduce the incidence of cars being developed for single flying laps only, allowing them to be more versitile and encouraging their owners to enter other types of events.

That depends on what you call time attack. If You're referring to superlap then sure, but remember the only reason they are using cams is because eastern creek wont allow them to use the track under any other governing body's rules.

The time attack we ue use at qr and lakeside has nothing to do with cams and has no agenda's. run what you brung and just enjoy yourself. How hard is that.

but they're just track days Noel. These guys are talking about the NSW & Australian SuperSprint Championships. Even though its just club level, the guys who enter this are going for the competition as much as they are interested in their own times and having fun going flat out around a race track. People want to have competitive classes of relatively similar vehicles they can enter.

Edited by hrd-hr30
That depends on what you call time attack :P Time Attack is just a new-fangled name for Sprints.

its a bit deeper than that harry. Time attack is a new fangled name for sprints that generally exclude cams from the equation for all the above mentioned reasons.

My reply was directed at Duncs reference to time attack stepping in to line with cams rules. Wont happen. the whole idea was to move away from their draconian ideas.

but they're just track days Noel. These guys are talking about the NSW & Australian SuperSprint Championships. Even though its just club level, the guys who enter this are going for the competition as much as they are interested in their own times and having fun going flat out around a race track. People want to have competitive classes of relatively similar vehicles they can enter.

^^ Yep spot on Harry. I love having a fang, but most importantly it's about the competition with similiar spec cars.

its a bit deeper than that harry. Time attack is a new fangled name for sprints that generally exclude cams from the equation for all the above mentioned reasons.

My reply was directed at Duncs reference to time attack stepping in to line with cams rules. Wont happen. the whole idea was to move away from their draconian ideas.

For what it is worth:

In WA the CAMS sanctioned sprint series has a completely different slass structure to that talked about here. It is a championship series too. The people running it are progressive too for that matter.

See www.speedeventseries.com if you are interested.

Mostly the term time attack is used by people who heard about it on a DVD they got with a Fast Fours mag & who do not understand that this sort of nonsense (ie sprints) has been going on for years.

^^ Yep spot on Harry. I love having a fang, but most importantly it's about the competition with similiar spec cars.

HUH! Isnt that the crux of this whole thread? There is no competition between similarly specced cars, Particularly if you drive an import. :P

lol I thought this thread was about running slicks with no cage?

And FWIW when I said Time Attack I was thinking "World Time Attack Challenge". QLD has a particular issue since Morgan Park is the only CAMS track left......

One other thing I'd like to know....a couple of people have made a distinction about "Race" cars as though they are inherantly faster than a street car. In my experience a log booked race car is likely to be less modified and heavier (cage etc) than the average road car that turns up to a sprint - so why make the distinction?

Common regs should be common regs. A car should not be allowed more (or less) mods because it happens to have a number plate.

For what it is worth:

In WA the CAMS sanctioned sprint series has a completely different slass structure to that talked about here. It is a championship series too. The people running it are progressive too for that matter.

See www.speedeventseries.com if you are interested.

Mostly the term time attack is used by people who heard about it on a DVD they got with a Fast Fours mag & who do not understand that this sort of nonsense (ie sprints) has been going on for years.

Bullshit. most people got in to it because it was a squillion times easier than jumping through cams hoops.

If the governing body's had any brains at all and did set classes up a bit more fairly and time attack could become their best source by far of new people in to the sport. Instead it goes one of 2 ways

A. People try and get involved via cams and realise its too damn hard so turn to time attack

B. People get in to time attack and try to move on but refuse for the same reasons so stay with time attack.

I can only speak for our lakie/qr time attack fraternity but 90% of them fit either of these criteria. Most would love to spread their wings but its just too hard.

Bullshit. most people got in to it because it was a squillion times easier than jumping through cams hoops.

If the governing body's had any brains at all and did set classes up a bit more fairly and time attack could become their best source by far of new people in to the sport. Instead it goes one of 2 ways

A. People try and get involved via cams and realise its too damn hard so turn to time attack

B. People get in to time attack and try to move on but refuse for the same reasons so stay with time attack.

I can only speak for our lakie/qr time attack fraternity but 90% of them fit either of these criteria. Most would love to spread their wings but its just too hard.

Well my experience is completely the opposite. The CAMS speed series over here brings heaps of new people into the sport & basically allows people to run whatever they like. So it is both easy to get into & sanctions by CAMS. Last year some 300+ individuals entered one or more of our events.

A great many people move on to racing. For that matter many entrants do sprints etc because they no longer have the time or inclination to run full blown race meetings. Some people do both. Some people (like me) enjoy it for what it is.

The problem I have with most "time attack" class structures is that it forces you to run on sht tyres.

Well my experience is completely the opposite. The CAMS speed series over here brings heaps of new people into the sport & basically allows people to run whatever they like. So it is both easy to get into & sanctions by CAMS. Last year some 300+ individuals entered one or more of our events.

A great many people move on to racing. For that matter many entrants do sprints etc because they no longer have the time or inclination to run full blown race meetings. Some people do both. Some people (like me) enjoy it for what it is.

The problem I have with most "time attack" class structures is that it forces you to run on sht tyres.

Must be a geographical thing, or as Duncan alluded to, we have far less cams tracks here than non cams. I dont excactly view quality semi's as shit tyres either. Did you not see what fully prepped (non cams compliant) cars did on that shit rubber at superlap this year.

Must be a geographical thing, or as Duncan alluded to, we have far less cams tracks here than non cams. I dont excactly view quality semi's as shit tyres either. Did you not see what fully prepped (non cams compliant) cars did on that shit rubber at superlap this year.

We have precisely two tracks over here. Both CAMS.

Sorry I didn't explain myself re tyres. I was trying to reference rules that prohibit the use of R comp tyres & force you to use harder more road biased stuff. Which don't work well nor last well.

Edited by djr81

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...