Jump to content
SAU Community

Recommended Posts

I still can't get over all those tough GT-Rs...

Please someone tell me that you guys collectively get together and enter all those GT-Rs into Car Shows? Like 10 GT-Rs in 1 stand?

Nothing will get the Japs attention more than a 7 second GT-R or a car show stand with 10 big-power GT-Rs in Oz.

I only had a quick glance, but I didn't see any pics of GTR-700 in there. Rezz, those GT-Rs lined up are all Autostyle (a car dealer) car's... well customer cars. As Roy pointed out, they all had dyno charts stuck up on their windows with 400kw+ readings... but none of them raced?

Also there was a maroon ECR33 with a 3L/T88 combo (and a ton of stickers) - did anyone see it run? Had gold RB26 covers on the engine but was a RB25 head...

I have only ever seen Dominics yellow gtr run a 10.5 the rest havent run....

Although they Were at Flying 5th (Bathurst) But didn't do to good...Comparing to other Cars that raced...

They are well presented cars and Most of them Have over 400kw at the treads...But it would be good to see the autostyle cars having ago at putting some numbers down To prove there power figures...

But i must say they look CRAZY!!!!

CHeers

DoughBoy, I have quite a few shots of GTR700 both preparing to race and with the bonnet up in my gallery.

Also that maroon 33 GTsT you refer to is owned by Da_Man who checks this forum ;) He ran a flat 12 but told me that he is concerned about going quicker as it would require a few additions to his car (to meed ANDRA safety requirements) that he cannot perform in time for future drag combat events (namely QLD this weekend)

As far as the autostlye cars are concerned I read in the Autospeed article posted earlier that Tim plans to hit the Wednesday night street meets soon

Guys Did anyone Take any photo's Of the ADVAN Yellow GTR????....

i took a pic of its motor but anyone got any other pics of it...

?

thanx

A couple I snapped...

DSC_0617.jpg

DSC_0618.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...