Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Hullo everyone

Still got the R32 and the R30. Sold the Senator and bought a Isusu ute to tow the trailer. Had the 30 out a few times but have decided to rewire it as most of the circuitry is not needed now.

Couple of things.

The arial on the GTR is broken where the rod screws in and I am having trouble sourcing a new one. Apparently they are made by AutoFlex in Germany, not for any particular model or type. Model number is 7 691 2700110001 Universal top 12v. I can get one from UK for $200 but has anyone got a better idea?

Next, I am thinking of a Haltech ECU for the 30. Been told a Platinum ProR32 or a Platinum Sport 2000 will be suitable after minor wiring mods. Any experience?

Lastly, anyone running Flex-Fuel and can you get it easy?

John

Couple of things.

The arial on the GTR is broken where the rod screws in and I am having trouble sourcing a new one. Apparently they are made by AutoFlex in Germany, not for any particular model or type. Model number is 7 691 2700110001 Universal top 12v. I can get one from UK for $200 but has anyone got a better idea? John

Hi John,

No........ No alternative. I did the same. $200 mask as it screws straight in. The exchange rate was a lot better when I bought mine but it was still $150.

The only other thing you can do is use that heat shrink stuff to secure the broken section.

These are the sort of things that i just "suck it up" and pay the money. I've long forgotten about the money but driving around with a busted aerial would do my head in!

Good luck.......

Bob.

Hey Bob et al'

One of my posts from early 2011 was just liked (thanks Vitalikea) which rejogs my mind about our initial chat on organising an ADM meet and cruise...unfortunately it will be geographically challenging for some ppl (sorry Ken) but I think we should still do this :)

My car has been off the road for a year and finally will be registered again next week (fist pumps in the air).

Edited by Marko R1

Hey Bob et al'

One of my posts from early 2011 was just liked (thanks Vitalikea) which rejogs my mind about our initial chat on organising an ADM meet and cruise...unfortunately it will be geographically challenging for some ppl (sorry Ken) but I think we should still do this :)

My car has been off the road for a year and finally will be registered again next week (fist pumps in the air).

Absolutely......... I've been an advocate of this for ages.

What I would like to do now is start a chain of ADM owners who visit this thread.

I'll start - User Name - Real Name and Colour and Location.

1 - Aussie_Delivered_R32_GTR - Bob - Red Wine - North West Sydney.

Brad, I'll grab one mate. PM me your bank det's mate. I'll tfr from my Nigerian account, but really, shoot me a PM.

I'd love a cruise but alas, the gtr is sleeping and will be for a while.

3. Boywhocriedwolf (fkn ash), Ken-wine red mica-Sunshine Coast QLD.

The list looks like this so far......

1 - Aussie_Delivered_R32_GTR - Bob - Red Wine - North West Sydney.

2 - Marko R1 - Marko - Jet Silver - Inner West Sydney

3 - Boywhocriedwolf (fkn ash), Ken-wine red mica-Sunshine Coast QLD.

The list looks like this so far......

1 - Aussie_Delivered_R32_GTR - Bob - Red Wine - North West Sydney.

2 - Marko R1 - Marko - Jet Silver - Inner West Sydney

3 - Boywhocriedwolf (fkn ash), Ken-wine red mica-Sunshine Coast QLD.

For the list

John Murray GTR-059 Jet Silver Merewether

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...