Jump to content
SAU Community

Recommended Posts

vettel's off the hook.

statement from the FIA read: "Having heard from the driver and team manager, and having noted that Car 1 started what was its fastest qualifying lap with 17 seconds to spare prior to the chequered flag, the stewards determined that no advantage was gained when car 1 left the track.

"Accordingly no breach of Article 20.13 occurred on this occasion and the stewards decide to take no further action."

Edited by tweety bird

I think more so because LH won't be able to look after his tyres given the way he sets the car up. His best hope is to get a very sizable gap off the start and hope McLaren can find a nice big hole to drop him in (and hopefully away from Massa).

If he can control himself for 2hrs he might get away with the race.

due to his ability to look after tyres?

yes, but more of that i don't think the rest will look after there tyres.

it's going to be a race about tyres, redbulls are hard on there tyres so are the ferraris, mercedes will be strong here but are unlikely to pose a threat and hamilton well.....

you know what im going to say. :)

If he can control himself for 2hrs he might get away with the race.

I predict Ham will just drive away from the field in the opening stage of the race.

Jenson will pass Vettel and stay P2.

Seb will be on the third step of the podium and inconsolable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...