Jump to content
SAU Community

My dash lights are really dark


Tommyk
 Share

Recommended Posts

Hey guys,

Just got my skyline yesterday, but while driving at night I noticed I couldnt see how fast I was going, nor at what rpm or anything else. The back part of the dash lights up green, but its not very bright at all, and the red pointer things dont light up at all ?

I dont have a dimmer switch, looks like the workshop didnt fit them.

I've taken the dash apart, but I really have no idea what to do.

Any ideas ?

Thanks heaps

Link to comment
Share on other sites

You sure that you do not have a dimmer switch? I do not mean to make a fool of you or me but just in case, The dimmer on a R33 is on the right indicator stalk. From memory it is just beside the lights switch.

Does that make sense.

Link to comment
Share on other sites

The right hand stalk itself only has the parking lights, low beam, high beam options. No dimmer switch on there.

Ive checked everything, pulled the whole dash apart, and nothing - no dimmer ;)

Are the red thingies which indicate which speed you're goin at, rpm, etc, meant to light up ?

Coz mine dont come on AT ALL (i dont think ?) Or if they do, theyre really dark

Link to comment
Share on other sites

I havent checked the fuse

But then the back of the dash lights up green, albeit a very poorly illuminated green, so I dont THINK its the fuse.

Keep the ideas coming though ;)

Id probably just need to find the right wire for the power/illumination to the dash, and rewire it with a different impedance ?

Although I really dont wanna do that in case i f u k things up

:)

Cheers

Link to comment
Share on other sites

the dimmer in R33 is fitted on compliance. if you don't have one, the compliancer must be a bit dodgy. check the bulbs behind the dash (need to take it apart) could be one of those aftermarket bulbs with coloured bulbs or even coloured rubber sleeves on.

Link to comment
Share on other sites

I think i'll just leave it at - my compliancer is dodgy :headspin:

No dimmer switch anywhere to be found. Trust me on this one.

rs73 - I noticed that the bulbs had green 'condoms' over them. When the dash lights up, its dark green. What colour is it meant to be normally ?

Thanks for all the help so far guys ;)

Tom

Link to comment
Share on other sites

In mine it has a blue 'condoms' which makes the lights turn a bit towards white when it's on.... that's a standard one. I've seen someone fitted with a painted one. Depends what paint, sometimes it's so bad that it didn't transmit enough light. the stock rubber condoms will be transparent enough so you can see the dials properly. You can try taking them off and see if it's not too bright or too yellow for you.

Link to comment
Share on other sites

Yes. There's various bulbs behind the speedo face that's been positioned on "strategic" location, so that it can illuminate evenly even the needles as well. The needles are like transparent plastic that will somewhat "glow" when being backlighted. You might find yours do when you take that green 'condoms' off....

Link to comment
Share on other sites

Ok what you need to do is go down to Supercrap autos or Autobarn and buy some 5watt wedge type globes. They are also known as parker globes. The standard ones are dim at 3.8 watts.

Take your dash cluster out and replace the bulbs with the 5 watt types. Make sure you do use the blue covers on them as it makes the light more "white" as opposed to orangy yellow crap the wedge bulbs emit.

There are some brands of whiter brighter globes available like Phillips blue vision parkers but I dont know where to buy these.

If this doesnt help there is a fault somewhere.

Link to comment
Share on other sites

All fixed

I havent checked to see the colour of the globes - they look a bit yellowish.

But theres definitely light illuminating the dials, which is all I really need

If I get bored of this ill either get covers for the globes or go EL

Cheers guys

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • T51R mod is an Antisurge slot. With exception that it has few extra legs on the base of it which makes a sound, and it needed to be inserted into the comp housing.  
    • Is WHC34 a 2 wheel drive Stagea?  4wd Stagea 100% fits, and I'd say 99% sure 2wd will too....they just used the GTR setup as that best suited the wagon floor. BTW I hope you saw Brett's post about potential reasons for a leak, unless you can see the plastic cracked somewhere, it is unlikely to be the tank itself leaking.  Can you see fuel dripping or is it just a smell when you park? Have you had any of the tank/pump holder apart?
    • They did get back to me. First response is from the mechanic that did the work. The problem is that the information that followed wasn't in the original report, which again, I let car inspect know should have been provided and influenced my decision to buy. Ball is back in their court and they have 5 more days to respond.  The actual structural damage was not a complete write off as they had me originally believe.  It just needed to be corrected properly and cleanly as opposed to the botch job of whoever did it last on the rad support and undercarriage. Smoothed out the scrappy welds and did it properly plus painted.
    • Haven't updated this is a while. -5 speed conversion is done. Then center console, parking brake handle, and mounting bracket can be adapted from a R34 since the S2 parts are all disco. Console is a slightly different grain pattern and color but works fine. R33/ R34 GTS (no booster) clutch pedal works as well as the matching master cylinder. Wiring is simple, jump the starter connector at the fuse box, note which wires are connected at which position on the auto neutral safety switch and cut off the switch harness and connect to the corresponding switch on the 5 speed. -Rear R34 rear subframe swap is completed. Full Nismo arm set, 2-way LSD set up soft, 322mm Brembo brakes, Ohlins Flag-R coil overs (need to drop the spring rate 1Kg) -RB swap is under way. HKS Step 2 High Response 2.8 BCD stroker kit / Step 2 V-Cam / GTIII 4R Kit I may not use the 4R kit but not sure yet as I've seen some pretty decent dyno sheets on it and it doesn't spool as slow as people think when you have v-cam. I have the wiring manual for the car and a spare 260RS harness so the wiring shouldn't be that bad but I just haven't had the time to invest in it. If anyone has a suggestion for someone who can handle it let me know! I have a bunch of spare 5mt swap parts and some Nismo 580 turbos if anyone needs/wants them hit me up. Located in California but willing to ship. As always, thanks to all the members who have answered my questions and helped this project keep moving!      
    • Did Car Inspect get back to you? How bad was the actual "structural" damage? What front surgery was required?
×
×
  • Create New...