Jump to content
SAU Community

Recommended Posts

Hi Guys,

had this system on my previous R33 GTR i imported from Japan -

was keen to use it on my r34 hoping the hanging points would be very close but there out

Has no markings as to what brand it is - but looking at some photos it look likes Fujitsubo

Cheers

Steve

Located in Syd

post-31999-1290830019_thumb.jpg

post-31999-1290830099_thumb.jpg

post-31999-1290830110_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/345682-titanium-exhuast-r33-gtrgtst-800/
Share on other sites

There is only one place in Sydney that can weld titanium - this excercise is to expensive and plus I have found another replacement I'm almost certain it's 3 inch cat back with 4 inch tip - whole thing is titanium!!!

Damn to bad it's not a complete 4" system, would of bought it today

Hmmmm - 3 inch is very small looking at a ruler in front of me

I will double check measurements Monday and update :(

Cheers

Steve

  • 2 weeks later...
  • 3 weeks later...

Steve pm me your details and we'll have a talk mate,,,or ring me on 0419160561. If I don't answer,,,leave me a message and I'll ring you back.

Cheers

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...