Jump to content
SAU Community

Racing Tips Needed

Johny Bravo

By Johny Bravo,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Johny Bravo Proficient

Johny Bravo

Posted
Posted

alrighty, getting my 31 back this friday and me and some friends have booked out baskerville raceway for the day. we're expecting somewhere between 200 - 240 rwkw from my car and unfortunatly it's an auto with a stall converter and lsd. only an auto cause my budget ran out and what not. any way, what i was hoping for is some tips on racing and what things i should watch/concentrate on doing. never been on the track before and the main reason im getting on the track is cause i wanna get used to my car before i take it back on the road and because i want to be able to have some fun in a controlled environment where i can't hurt no one else. not a fan of dangerous road driving. any comments/tips/input is appreciated and any one who doesn't have constructive critism and just wants to shoot me down, go for it, i'll just think your a knob anyway. sorry for any spelling mistakes and thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/346122-racing-tips-needed/
Share on other sites
Johny Bravo Proficient

Johny Bravo

Posted
  • Author
Posted

Not sure who is gonna be there. A friend of mine built a racecar and every one who helped is heading down. We booked the track for the whole day just to our selves. My mechanic drift's and im sure he's had racing experience so i'll ask him for some tips, plus he's got my car at the moment so i'll make sure he gets it ready for racing. Is there anything i'll need to do after the day is over? Ie: book it in for new brakes?

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

don't do too many laps in a row - it will be a quick way to kill the auto. Do you have a transmission cooler? Same goes for engine oil cooler. Limit yourself to 4 or 5 laps at a time. Your brakes will probably go off by then anyway if you are just using normal pads and fluid.

Beer Baron Grand Master

Beer Baron

Posted
Posted

honestly for a first day you don't need much advise on driving as such. but there is on really important piece of advice.

BRING THE CAR HOME IN ONE PIECE.

there is no prize money for the fastest lap, most out of control lap, or most spins in a lap. so just take it easy, enjoy yourself without pushing too hard. when on the track if you can go out behind someone with some experience that will help a bit but don't assume you can brake as late as they can etc as their car/tyres may be completely different to yours. so don't get sucked in to the corners etc in a car with inferior grip.

make sure your car has decent level of brake pad and rotor, some new brake fluid, fresh oil in the engine.

since it's a new package take it a bit easy the first few laps and build it up a bit then bring it into the pits and check for leaks, check temps, anything loose etc.

basically just look after the car while having fun. you are not going to be offered an F1 test day on your first time on the track so just go out and enjoy. don't worry too much about punching out the super quick laps. oh, and keep an eye on your mirrors.

Johny Bravo Proficient

Johny Bravo

Posted
  • Author
Posted

as far as i know there will only be one car on the track at a time. I have an oil cooler for the transmition as it has a manual radiator. Also have a spare auto gearbox. Brand new pirelli p6's on the car so i'll take it easy so i don't chew them. All the fluids in the entire car will only be about a day old when i get to the track. Cheers for the feed back so far.

Johny Bravo Proficient

Johny Bravo

Posted
  • Author
Posted

Cheers. I'll pick up a gauge tomorro. Gonna grab a 20L jerry can too just in case she chews the fuel a bit much. The ecconomy wasn't too great before she got worked and i don't see it getting any better. Especially around a track.

Sir Lord Van Von Vader'ham Veteran

Sir Lord Van Von Vader'ham

Posted
Posted

the oil coolers in the radiators are a bit rubbish, do yourself a favour and pick up an external one for supercheap/repco... if funds allow.

most important rule - just have fun!!!

LSX-438 Mentor

LSX-438

Posted
Posted

my advice for first timers

1. Take it easy first few laps

2. Warm everything up before you drive it hard (seriously pay attention to this)

3. Cool everything down before you come to a stop (after sessions)

4. Check under the bonnet and car for leaks (after sessions)

5. Don't put your handbrake on (after sessions)

6. Regularly check your brake pads!

and most importantly, have fun!

nismoman Community Regular

nismoman

Posted
Posted
Whats this about the handbreak lsx? Amd i always warm up/ down properly when driving.

It's just a precaution to prevent your brake pads "welding" to your brake disc or linings. As the brakes get very hot after a track session, if you apply the handbrake, the brake pads can get very sticky and can bind up.

Best to avoid using the handbrake and use a wheel chock.

Beer Baron Grand Master

Beer Baron

Posted
Posted
subscribed, looking for tips too

don't know where to start with you? have you tried riding a tri-cycle? maybe start there then move up to a big boys bike with training wheels. then perhaps pedal car, and so on up through the ranks. never give up!

Johny Bravo Proficient

Johny Bravo

Posted
  • Author
Posted

ah yes, handbreak makes sense. I had a think about it after and figured it was something like that. Oh another thing, what pressure should i have my tyres at? There on 15 inch rims and there just a tad bigger then standard. Ie i think the side wall is 65 instead of 60. Oh and the weather is forcast rain. So what should i do in wet conditions? Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...