Jump to content
SAU Community

Recommended Posts

alrighty, getting my 31 back this friday and me and some friends have booked out baskerville raceway for the day. we're expecting somewhere between 200 - 240 rwkw from my car and unfortunatly it's an auto with a stall converter and lsd. only an auto cause my budget ran out and what not. any way, what i was hoping for is some tips on racing and what things i should watch/concentrate on doing. never been on the track before and the main reason im getting on the track is cause i wanna get used to my car before i take it back on the road and because i want to be able to have some fun in a controlled environment where i can't hurt no one else. not a fan of dangerous road driving. any comments/tips/input is appreciated and any one who doesn't have constructive critism and just wants to shoot me down, go for it, i'll just think your a knob anyway. sorry for any spelling mistakes and thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/346122-racing-tips-needed/
Share on other sites

Not sure who is gonna be there. A friend of mine built a racecar and every one who helped is heading down. We booked the track for the whole day just to our selves. My mechanic drift's and im sure he's had racing experience so i'll ask him for some tips, plus he's got my car at the moment so i'll make sure he gets it ready for racing. Is there anything i'll need to do after the day is over? Ie: book it in for new brakes?

don't do too many laps in a row - it will be a quick way to kill the auto. Do you have a transmission cooler? Same goes for engine oil cooler. Limit yourself to 4 or 5 laps at a time. Your brakes will probably go off by then anyway if you are just using normal pads and fluid.

honestly for a first day you don't need much advise on driving as such. but there is on really important piece of advice.

BRING THE CAR HOME IN ONE PIECE.

there is no prize money for the fastest lap, most out of control lap, or most spins in a lap. so just take it easy, enjoy yourself without pushing too hard. when on the track if you can go out behind someone with some experience that will help a bit but don't assume you can brake as late as they can etc as their car/tyres may be completely different to yours. so don't get sucked in to the corners etc in a car with inferior grip.

make sure your car has decent level of brake pad and rotor, some new brake fluid, fresh oil in the engine.

since it's a new package take it a bit easy the first few laps and build it up a bit then bring it into the pits and check for leaks, check temps, anything loose etc.

basically just look after the car while having fun. you are not going to be offered an F1 test day on your first time on the track so just go out and enjoy. don't worry too much about punching out the super quick laps. oh, and keep an eye on your mirrors.

as far as i know there will only be one car on the track at a time. I have an oil cooler for the transmition as it has a manual radiator. Also have a spare auto gearbox. Brand new pirelli p6's on the car so i'll take it easy so i don't chew them. All the fluids in the entire car will only be about a day old when i get to the track. Cheers for the feed back so far.

Cheers. I'll pick up a gauge tomorro. Gonna grab a 20L jerry can too just in case she chews the fuel a bit much. The ecconomy wasn't too great before she got worked and i don't see it getting any better. Especially around a track.

the oil coolers in the radiators are a bit rubbish, do yourself a favour and pick up an external one for supercheap/repco... if funds allow.

most important rule - just have fun!!!

my advice for first timers

1. Take it easy first few laps

2. Warm everything up before you drive it hard (seriously pay attention to this)

3. Cool everything down before you come to a stop (after sessions)

4. Check under the bonnet and car for leaks (after sessions)

5. Don't put your handbrake on (after sessions)

6. Regularly check your brake pads!

and most importantly, have fun!

Whats this about the handbreak lsx? Amd i always warm up/ down properly when driving.

It's just a precaution to prevent your brake pads "welding" to your brake disc or linings. As the brakes get very hot after a track session, if you apply the handbrake, the brake pads can get very sticky and can bind up.

Best to avoid using the handbrake and use a wheel chock.

subscribed, looking for tips too

don't know where to start with you? have you tried riding a tri-cycle? maybe start there then move up to a big boys bike with training wheels. then perhaps pedal car, and so on up through the ranks. never give up!

ah yes, handbreak makes sense. I had a think about it after and figured it was something like that. Oh another thing, what pressure should i have my tyres at? There on 15 inch rims and there just a tad bigger then standard. Ie i think the side wall is 65 instead of 60. Oh and the weather is forcast rain. So what should i do in wet conditions? Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...