Jump to content
SAU Community

Recommended Posts

Hey guys,

Recently I've noticed my turbo is sounding different. When my turbo kicks in from 0-0.3-4 bar, it sounds all normal, like the high pitch whistle, but when it goes higher up until 0.7bar, it sounds like it's screaming? lol

Kind of sounds like the turbine is loose or something. Is that normal?....

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/346253-is-my-turbo-on-its-way-out/
Share on other sites

Well if it never used to sound like that before that i would say its not normal.....

It could be from a leaky exh gasket or the nuts holding the turbo to the manifold running loose or the turbo itself on its way out.

Start scrapping and do some investigating...take off the intake pipe and check for excessive shaft play

It sounds more like a jet turbine with the way the air moves through it?

+1 check for shaft play in the turbo.

From experience though, this could be the rear turbine wheel (exhaust wheel) is starting to bust up and break away.

Sorry guys, I kinda don't have much idea on how to check those things.... Can you guys shed some light? ;)

follow your airfilter back to the turbo, take that hose off the turbo, use ur hand and see if the compressor wheel has any shaft play :(

when my shaft f**ked it self and the compressor starting just making love to the housing it sounded like an A10 fighter jet, ridiculously loud but it still boosted fine.

The longer you leave it the worse it will get, if it is a stock turbo I wouldn't worry as you will probably just bin the whole thing, but if its an expensive after market or a high-flow the sooner you take it out the greater the chance it can be repaired without too many new parts.

First confirm this is what is happening by taking the front side off the turbo and look for wear marks and shaft play, it could be as simple as a leaking exhaust gasket or something making it sound high pitched though I'd put my money on it being the turbo shitting itself.

if you cant do it yourself take it to a turbo workshop and get them to diagnose it, find a quality place so they don't take you for a ride though.

Edited by Rolls

although it sounds sick lol. mine sounded like a jet, but it was my exhaust wheel... i was booting the car once heard a bang and a rattle thru the exhaust, car sounded like a jet after that... bit of my exhaust wheel had come off.. mind you the car kept boosting as normal.

when my shaft f**ked it self and the compressor starting just making love to the housing it sounded like an A10 fighter jet, ridiculously loud but it still boosted fine.

The longer you leave it the worse it will get, if it is a stock turbo I wouldn't worry as you will probably just bin the whole thing, but if its an expensive after market or a high-flow the sooner you take it out the greater the chance it can be repaired without too many new parts.

First confirm this is what is happening by taking the front side off the turbo and look for wear marks and shaft play, it could be as simple as a leaking exhaust gasket or something making it sound high pitched though I'd put my money on it being the turbo shitting itself.

if you cant do it yourself take it to a turbo workshop and get them to diagnose it, find a quality place so they don't take you for a ride though.

It's just a stock turbo, so it's no biggie I guess. But yeah, I'll do a check on it when

I get some time and I guess if it's stuffed then I'll get a high flow.

But yeah, had another listen to it, it does sound like a jet lol. But it's definitely still boosting fine. But am I losing any power at all? And if I happen to leave it, what would happen? Lol

  • Nope 1
  • 1 month later...
  • 2 weeks later...

Just a quick update...

No, I haven't had time to check it out or fix anything.

BUT, my boost is slowly creeping up.... Now it creeps up to about 0.85 bar of boost and I don't even have a boost controller in the car....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...