Jump to content
SAU Community

Recommended Posts

hey guys got a 33 gtr pushign out some good power out of twin t517z turbos but wondering if i could squeeze a t51r on a low mounted manifold? has it been done before?? i really love the sound of a big single and love the feel of going from lag to extreeem boost? also if it can be done is anyone interested in swapping my twin t517z (360kw@all4 21psi) for a t51r or t04z ect , must have a low mount manifold and !!,must!! be in good condition.. there is absolutely nothign wrong with my turbos , just alwasy been into the huge single?

Link to comment
https://www.sau.com.au/forums/topic/346880-rb26-low-mounted-single-turbo/
Share on other sites

Werent the old HKS TA45S turbo kits low mounted?

If you could find a HKS lowmount cast manifold you might be able to squeeze a T04Z in there? Not sure how you would go fitting a 4" intake pipe without cutting the shit out of the engine mount.

+1 for high mounted gates.

I always wanted a lowmount single also, with a big gidson motorsport looking manifold hanging over it. Id have the gate(s) pointing upward from the collector.

From memory of the best way to locate a gate is straight off the collector, which in a low mount is not always possible.

I would also vote T04Z.

Ref:

http://media.photobu.../1000213ig7.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...