Jump to content
SAU Community

Recommended Posts

Trent i dont, i didnt feel comfortable asking you for any more help as i understand your a buisness. Im assuming cause i dont have the software that i probly cant do this myself? Im more than happy to send the power FC to you and pay you if you are willing to help out? also if you could leave the basic rb26 map in it for me? as it currently has a tune for 260kw for a big single and 720cc injectors. the 26 going in will be stock for 6 months or so. Pm me if you can help out so we can sort out some payment. Wish i was closer to you id just drop the bloody car off to you and be done with it.

if its going back to stock a simple DATA INIT will load the default maps, AFM ramps and all the settings

obviously you will loose your current tune if you do this, but thats the sure fire way

or do you just need to revert to stock AFM ramps and keep everything else modified as-is?

its a 5 minute task in datlaogit to load the stock AFM ramps

Have a look in the folder that you installed FC Edit universal and you will see there is a bunch of maps that get installed with it. There is an R34 GTR RB26 v8.0 something map there as well. You can use the software to open the map offline and get the data that you need that way. All the GTR maf sensors have the same scale so using the R34 map for reference will be fine.

Edited by GTRNUR
  • Like 2

Trent i dont, i didnt feel comfortable asking you for any more help as i understand your a buisness. Im assuming cause i dont have the software that i probly cant do this myself? Im more than happy to send the power FC to you and pay you if you are willing to help out? also if you could leave the basic rb26 map in it for me? as it currently has a tune for 260kw for a big single and 720cc injectors. the 26 going in will be stock for 6 months or so. Pm me if you can help out so we can sort out some payment. Wish i was closer to you id just drop the bloody car off to you and be done with it.

where are yo located?

i only ask as i am in and out atm. It would take 5mins to make something up map wise and would be happy to do it. how soon could you get it to me?

Have a look in the folder that you installed FC Edit universal and you will see there is a bunch of maps that get installed with it. There is an R34 GTR RB26 v8.0 something map there as well. You can use the software to open the map offline and get the data that you need that way. All the GTR maf sensors have the same scale so using the R34 map for reference will be fine.

the fc datalogit base map for the rb26 is based on what octane fuel?

Loading the base map still isnt goin to be ideal. Needs to have a decent tune in it.

+1

The base maps are enough to get your sensor calibrations correct and to drive off boost, but you certainly couldnt drive it on boost.

One other thought... If your going to use twin GTR maf sensors on an ecu with only one MAF sensor input you are going to have a tune stability issue. There is always some difference between the output voltages of both sensors.

The GTR ecu uses a mathmatical calculation that adds the two voltages (maf sensor values) together to work out the actual airflow. You can not do this with the RB20 pfc so the active load point will be off on occasion by at least 1-2 load cells.

Tieing the two maf output signals together will not work. Their values must be read independantly and then processed. Your only option will be to use a single maf sensor, and have a single air input path to the engine.

Edited by GTRNUR
  • Like 1

i was always planning to run the standard ecu, i just read something trent posted that i thought opened my options up a bit. if that much of a problem i will just run the stock ecu.

I was always planning to have it tuned after the power fc install. just assumed it wouldnt run with rb20 tune it... thus asking for the stock 26 map

Tieing the two maf output signals together will not work. Their values must be read independantly and then processed. Your only option will be to use a single maf sensor, and have a single air input path to the engine.

ive dioded them up in the past on 1 car, not ideal but from a tune and driveability perspective you would never know. maybe i got lucky but as long as the afm curve is smooth it should be ok.

other option is to run one z32 in the cooler pipe.

Cheers guys. I knew something was different about the 34R PFC, just couldn't quite remember what haha.

Also, worth paying that little bit extra for the new PFC and EL hand controller? Will that fix the missfire that the 32Rs get with the PFC?

and the physical loom plug is different, so even if you decide to be super crazy and pin swap, the physical plugs are different

nah they are the same.

PFC negates nats

and cas wires need swapping.

EL Hand controller is the best marketing rort since since Y2k compliant calculators..... i hate them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...