Jump to content
SAU Community

Recommended Posts

Notice his boost reading is blurred out too..

Only once for a minuscule second did the RPM drop into the high 4000's, there is a lesson to be learned here kids...

Also, awesome SR to allow it to live at that sort of RPM reliably.

If a tyre is DOT certified doesn't that make it road legal somewhere in the world; thus a semi? (serious question not a sacastic remark)

If you're going to the extremes of saying that even they're if DOT approved it's not a 'true' semi, I would raise what is the point of these ultra ultra soft 1 lap qualifying wonder tyres, except as a supplier you're going to get more people buying more of them to be competitive ... /sarcasm

Point is that the big boys are most likely going to have some sponsorship with tyres so the relevance is lost in out-right times. It's more so in the Open Class, where by 'joe citizen' is likely to gain better times with more track lapping (especially the Interstaters without local track knowledge) with a DOT R6 or Z214 as they are a more consistent tyre which are more readily available in the different sizes required by non off the shelf circuit sprint cars. This is compared to the way it currently is with he/she who has the most money to throw new uber tyres at their car each session (on top of their car build) will more than likely go quicker, just by virtue of always having better grip.

time attack don't recognise them as semi slicks. CAMS don't recognise them as semi slicks. AASA don't recognise them as semi slicks. They're not permitted in any road rallies. ANd they're not road legal. Time Attack/Superlap has always been on street tyres in Japan and here and I think that's the way it should stay.

Besides, if you did allow the Hoosier R6 type of tyre, you have exactly the same problems with people using a new set of ultra soft A6's each session.

Even if they banned these ultra soft tyres, the top teams would still be using a new set of Mediums each session, because they're fastest when they're brand new. That's just the nature of racing - and not just time attack. Its the same in any class of racing and rallying - those who can afford it will use new tyres as often as possible to get that slight edge. While others may just race on second-hand rubber bought off those guys up the pointy end. That's just the way motorsport is.

Edited by hrd-hr30

The whole tyre usage issue could be avoided by limiting the number of tyres available to the competitors. Maybe open should be restricted to one or two sets to discourage using them like the pro guys. A no rules event will always be dominated by the biggest budget but this might level the playing field a little in the lower classes.

We could only afford one set.

Hey Russman, good to put face to the name. Also good time in your R32 GTS-T which I thought was a GTR. 1 min 42 is faster than 90% of local gtr's.

About the times comparing Superlap cars to V8 Supercars, the V8's are obviously regulated and much heavier than most of the Pro class cars and designed to do lots of laps, but still....

Hey Russman, good to put face to the name. Also good time in your R32 GTS-T which I thought was a GTR. 1 min 42 is faster than 90% of local gtr's.

Yeah John. Good to meet you too and thanks for the advise. I'll be in touch sometime to get some of your awesome upper camber arms :)

I think people would alter setup until they thought they had it fastest on the Friday with their first tyre set, then first or second session on Saturday morning, BAM, smash out their best time.... then use the remaining sessions to burn the tyres up with crowd pleaser skids :)

That's what I'd do anyway.... hypothetically, IF I could somehow afford two sets of tyres! :)

Edited by Marlin

The whole tyre usage issue could be avoided by limiting the number of tyres available to the competitors. Maybe open should be restricted to one or two sets to discourage using them like the pro guys. A no rules event will always be dominated by the biggest budget but this might level the playing field a little in the lower classes.

+1 - think that would work.

Also - make it so that only M compounds and harder are allowed for Open. This way there might be a bit more of a split between the Pro Class times and Open times.

I think people would alter setup until they thought they had it fastest on the Friday with their first tyre set, then first or second session on Saturday morning, BAM, smash out their best time.... then use the remaining sessions to burn the tyres up with crowd pleaser skids :)

That's what I'd do anyway.... hypothetically, IF I could somehow afford two sets of tyres! :)

Me too! Chase setup until you think it's the best it'll be then wind up the boost and go for it! haha.

+1 - think that would work.

Also - make it so that only M compounds and harder are allowed for Open. This way there might be a bit more of a split between the Pro Class times and Open times.

Interestingly I spoke to the Hankook guy and they only have softs and hards. No mediums yet?

Really, you know for certain? I'm intrigued! :)

One of the tyre dealers down here offered to bring some super softs up, and do tyre fitting etc. He was told that the Jap guys were brining their own tyres, and the compounds they are brining arn't avaliable to you. He has done stuff like this in the past, so he wasn't just getting fobbed off

Well, the winner, Cyber, hadn't even seen the new 295 Advan prior to their arrival in Australia, in fact they were busy cutting the car up to make them fit when we arrived! lol

Cyber got their tyres out of the same bin we did. All stocks of Advan 295's came directly to Australia, not available in Japan.

Edited by Marlin

And people wonder why others talk of special tyres rumours around the pits on the weekend ;)

I like the tyre & compound limitation idea in Open & Clubsprint. Would help keep the field closer as well as help differentiate the Pro times/budgets to those in Open. Clubsprint limit to only 6 tyres (can replace a non planned tyre if it's damaged or unsafe for continued use at scrutineers discretion), would be similar to what's meant to happen in Targa (correct me if I'm wrong Savman/Marlin).

Using Data dot with info allocated to the particular entrant is the go (as done at Targa in years past), rather than simply white pen marking. We all know how easy it is for a cheat to replicate a car number on a tyre in white pen.

FWIW, upon return from Tsukuba, "we" were convinced that the Japanese guys had special tyres, because they were Rupert after only a lap or two..... but have since discovered it's how they're used, as previously discussed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...