Jump to content
SAU Community

Recommended Posts

Trent do you have any results from SR20's.

I'm buying a TD06-20g 8cm. Hoping i did the right thing =)

I just red all 33 pages of this, Love it =)

Buy the L2 dont get the plain 06 variant.

This car had a GTRS on it (red line) and it lost nothing with the L2, this car has a little more lag than normal as VCT is disabled.

STD SR20 with 264 HKS cams on std valve springs etc..

post-34927-0-65490100-1313720508_thumb.jpg

Yeah I nearly bought the one (HKS mani) in for sale the other day cause I have an old HKS gate to suit, probably should of but i dont have alot of faith in second hand cast parts I cant see before I buy :(

now I will have to weld it onto the housing ghetto style too, doubt i can afford the 6boost low mount atm..howmushizzit??

Actually if i sell my old turbo..hmm

around $1200 + delivery lol :O

cheers for the graph Trent, i rekon one of those will be perfectly suited to a RB25.

You wouldn't happen to have a dyno graph of a RB25 with one of these turbos by any chance??

Buy the L2 dont get the plain 06 variant.

This car had a GTRS on it (red line) and it lost nothing with the L2, this car has a little more lag than normal as VCT is disabled.

STD SR20 with 264 HKS cams on std valve springs etc..

That is awesome considering it's compared with a HKS item.

How much boost?

That is awesome considering it's compared with a HKS item.

How much boost?

19peak, the gate was a little lazy (ebay) so its missing about 20 mid range kw too... as it cracked open @ 15psi.

Thats insane!

How do you think it would go on an 8cm housing or you think thats a dud choice? There are also 8cm IW housings that Kando sell.... Man these things just got back on the map for me!

Thanks Trent, sorry for so many Qs.

P.S. Told you ARTZ!

Thats insane!

How do you think it would go on an 8cm housing or you think thats a dud choice? There are also 8cm IW housings that Kando sell.... Man these things just got back on the map for me!

Thanks Trent, sorry for so many Qs.

P.S. Told you ARTZ!

10cm only for rb25 reckon. 8cm will miss out on too much mid torque and kw. If you got it run with it but if it was mine id use the 10cm.. ive had a few IW gates not perform so until i can confirm it being the turbo or the car i will stick to the ex gate.

Buy the L2 dont get the plain 06 variant.

This car had a GTRS on it (red line) and it lost nothing with the L2, this car has a little more lag than normal as VCT is disabled.

STD SR20 with 264 HKS cams on std valve springs etc..

Holly shit thats good.

Thanks Trent =)

This must be on e85 tho yea?

Holly shit thats good.

Thanks Trent =)

This must be on e85 tho yea?

conservative BP98 tune, peak timing was only 9 odd degrees took 12 no dramas..

but being std i was worried about longevity as it gets the shite drifted out of it.

conservative BP98 tune, peak timing was only 9 odd degrees took 12 no dramas..

but being std i was worried about longevity as it gets the shite drifted out of it.

Please comment on this vs a 8cm :(

FOR AN SR.... lol... will the 8cm make it much more responsive or is the extra flow of the 10cm only going to make it better better better?

here some pics of it compared to stock turbo..

inlet is 3 inch but comp wheel is the same diametre as stock just with bigger housing

DSC03038.jpg

but baby got back :P

DSC03035.jpg

I'm really not too keen on welding gate onto the housing but many do it and say it works fine..

What the biggest comp cover that fits with the standard RB 25 exhaust mani(with a little spacer) is it 3 inch?

and what would the TDO6H-20g with 12cm housing IW housing be like?

anyone have a rough idea with spool difference form 10cm to 12cm- 300-400ish rpm?

cheers

darren

Edited by jet_r31

I'm ready to buy now , What do you guys think of this one, with the SL2 rear wheel, haven't seen this one up there before.

I want a turbo that can do 320- 340rwkw(in a manual) i don't need anymore than that as i will be trans limited, so if i can

knock of a bit of top end flow and pick up spool, then all the better

http://www.ebay.com....984.m1438.l2649

What would a TD06SL2-20 G 10cm external gate do maxed out on a RB25?

you have any idea STATUS?..anyone?

cheers

darren

Edited by jet_r31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. Probably, given that there is only access from the bottom end of it, go with a drill bit. Don't start too small. 7 or 8mm is probably the right size. You want something that can make a big enough hole to do some damage, but not so bit that it clashes with the steel or binds up and breaks your wrist. A slow speed is probably a good idea too. Once the rubber is destroyed, you then have to get the crush tube off the stud, which will be the whole heat/oil/cutting exercise all over again, but this time with the need to strictly avoid damaging the stud (any further than the corrosion might already have done.
    • We replaced the connector just because we could and it was still there, once we swapped the injectors around it stopped. The injectors were something I had thoughts of replacing even before I first started the engine and in hindsight I should have 
    • Not too sure just yet, want to have a go at doing what I can myself, but to start with want someone to cast their eye over it tell me what needs doing to get it running and back on the road, so anyone with great overall knowledge would be ideal.
    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
×
×
  • Create New...