Jump to content
SAU Community

Recommended Posts

External gate is VERY hard to keep hidden. Even custom jobs that I have seen where the intention was to hide the gate, it's still easily spotted if the cops are looking around. if you're worried about cops at all, I wouldn't be going external gate.

Here in the UK we don't have to worry about this defect crap. Anything goes so long as it passes an MOT test. I could have two 10 lbs NOS bottles visible, a massive bell mouth turbo, dump valves, side exit pipe, you name it. I don't even have to run a cat (but I do have an emission test to meet). It's bloody great.:thumbsup:

People car do things for all different costs, some cheaper some end up paying more.

I dare say since these setups work so well you would be best to spend the few extra dollars and making the setup 100%. Using some high temp sheathing on lines, good quality bends and reducers/flanges studs etc so you dont blow out gaskets etc or warp with temp.

A gate for $300? I paid about $500 for my Turbosmart. I paid more then $150 in just flanges, studs, gaskets and elbows + reducer. So not saying anyone was wrong but we all often pay different prices for things and I know i couldnt do my setup with external gate that cheaply

med_gallery_462_50_238480.jpg

Is that the 8cm or 10cm turbine housing mate? I like the downpipe BTW and that is the trust triangle flange? Some peeps think it's ghey but not me.:D Also I notice your turbo is mounted very close to the front of the engine compared to Greddy copy mainfolds???

Edited by Tony de Wonderful

god some of you guys complain about some stupid shit. This turbo requires a ex WG so stop complaining that the cops will see it and rape your ass... If you don't like it sell your car and buy a excel or dont Modify your car.

So far im thinking i will go a T67-25G similar to SimonR32 setup and run eflex.

Is that the 8cm or 10cm turbine housing mate? I like the downpipe BTW and that is the trust triangle flange? Some peeps think it's ghey but not me.:D Also I notice your turbo is mounted very close to the front of the engine compared to Greddy copy mainfolds???

This is the 10cm housing with the original Trust manifold I was running at the time. Yeh all Trust kit with off triangular flanges, uses to run the total Greddy kit, these days its a bastard kit with Turbosmart gate and 6boost manifold

462After_Engine_Pic.jpg

462TD06_setup.jpeg

You are right, now that i am running a 6boost manifold the turbo sits a lot further forward and required moving the PS reservoir. Does give you a little more room for the dump pipe.

For what its worth, the 6Boost manifold resulted in a loss of a smidgen of power and hurt response a little. This could be the result of there being about 18 months between dyno runs and the car had lost a bit of performance in that time. I also changed from the Greddy Type R wastegate to a Turbosmart gate.

Cant see either really contributing to a loss in performance.

Considering the new setup has nicer piping and improved exhaust system...i think its safe to say 6Boost is no better then a Greddy manifold. Possibly worse. If all the handfeeding over 6boost manifolds were true I should have picked up some response and perhaps made a tad of power, especially given the exhaust improvements.

If I was starting from a clean sheet of paper I would go a Greddy manifold over 6boost now having tried both.

Considering the new setup has nicer piping and improved exhaust system...i think its safe to say 6Boost is no better then a Greddy manifold. Possibly worse. If all the handfeeding over 6boost manifolds were true I should have picked up some response and perhaps made a tad of power, especially given the exhaust improvements.

If I was starting from a clean sheet of paper I would go a Greddy manifold over 6boost now having tried both.

Is the 6boost equal length headers also? To be honest I doubt there is much room for improvement over design for exhaust manifolds from 10 odd years ago, just maybe 6boost are strong and don't crack etc? It's just lengths of pipe at the end of the day, choose your diameter and length (equal or not too) and away you go.

Yeh the Greddy manifold is a 6 into 2, 2 into 1 type manifold with a nice collector. The 6boost manifold is pretty much equal length into a slightly longer collector.

This is the greddy manifold...

med_gallery_462_50_8967.jpg

med_gallery_462_50_198872.jpg

med_gallery_462_50_323219.jpg

No need to see pics of the 6boost manifold, there are plenty around the net.

The 6boost manifold many prove more durable, time will tell. But the above manifold is now being used on another setup by Kris with the L2 I pictured a few pages earlier. It did need a light repair on two occasions but nothing even my humble welding skills couldnt fix.

Nothing wrong at all with the 6boost manifold. They appear to be well built and plenty of people ave got years of great service out of them. I suppose the point is if you have a china manifold that is serving you well, a HKS or Trust manifold working well...then I am not sure there is any point wearing the 2K cost of replacing it with a 6boost manifold as I doubt you will get any performance increase

The one I saw was very average the collector is a nightmare and the flange was seriously warped..

post-22242-0-29322400-1324452147_thumb.jpg

post-22242-0-56924200-1324452119_thumb.jpg vs my 6 boost post-22242-0-92237800-1324452129_thumb.jpg

Is that one of the steampipe ones from nz mate?

im not fussed on chinese made etc, im running a chinese $70 one atm, but its bent and blows gaskets out on regular basis.. my chinese hi mount makes 470hp at wheels on 26psi thru gt35r on stock rb25 so i cant complain about flow 2 much.

Is that one of the steampipe ones from nz mate?

im not fussed on chinese made etc, im running a chinese $70 one atm, but its bent and blows gaskets out on regular basis.. my chinese hi mount makes 470hp at wheels on 26psi thru gt35r on stock rb25 so i cant complain about flow 2 much.

yeh its the steampipe one from NZ around the $300 range... im all for using bang for the buck parts but that manifold was rubbish and I hate doing things twice so in the end the only solution was to pickup a used 6boost...

The thing that worries me with gate on manifold is police/ pits if you get a sticker and need to go over pits to go back to standard turbo you need another manifold if it on housing pull off turbo bolt on stock turbo get a basic tune take over pits done easy as

ya thats it, I just kept my bits so if i do get the defect, (which is unlikely cause i never drive the bloody thing :/) i can have it back to stock in a weekend..

Also

thats it finished

i think mines a little more inconspicuous :P

I admit its not hidden, but it does blend in well..Only someone clued on would spot it..

And if that someone looked under the bonnet well Im probably screwed either way...

DSC03212.jpg

Not sure if i will make a bracket to fit the standard heatshield or fab up a new one out of that heatshield stuff..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...