Jump to content
SAU Community

Recommended Posts

whats the mods/specs/power output on your car Birds?

maybe you should do a run in 4th from 2000rpm, flatfoot and film the tacho + boostgauge at the same time (if its mounted there), and me or ARTZ can do the same.

will be good to compare.

Whys ur car off the road for 2 yrs?

Been off the road for 2 years due too the $$$, got carried away buying parts instead of keeping on track with the original plan........... Just saving for ECU and maybe cams then good to go :thumbsup:

I'll take a stab in the dark that, in a rolling scenario from low rpm (2000) my car should pull ahead, given it's the more "streetable" turbo and gets on boost from about 3000 onwards...until around 4000, where Artz would come on and start to reel me in / eventually overtake. From there who knows...probably come down to max power and turbo efficiency in the top end. The Kando might well take it there if Artz can get his slipping clutch sorted.

Would be interesting to test a couple of different scenarios...the rolling from 2000rpm to test lag, and a rolling from 4000rpm where both turbos should be well on song, to test their response (?).

We can swap cars just to get a feel for each turbo, compare based on subjective opinion...but the only fair objective competition would be a rolling drag IMO, taking driver skill out of it.

ahh yes, efficiency...I must say this td06 feels alot more efficient than my old hiflow, though I feel my new fuel system has alot to do with this as well. But it all just works, it does the same thing all the time and doesnt run out of puff, it does it with much less effort than my old turbo too, then on gate it all just gets a little crazy, should be mental with .5 bar more boost and e85, I think thats when I will be wishing I had top mounted it ......I did play around with rolling starts, found boost coming in after 3500 but before 4000 most of the time..which is about normal for any rb25 really..

Anyway I have no idea what yours will behave like all I know is mine feels pretty damn quik already, I think maybe when my gate cracks it will be bye bye birdy ,then again you will probably have better traction with that fancy diff of yours..will be interesting..

So whenever your ready just hit me up, if I do lose I can blame my slipping clutch or my low boost ;)

sorry, 300rwkw and under only Simon.

good news: it holds boost and i get my car back

bad news: it makes less power on 19psi (220rwkw) then it does on 14.7 (245rwkw).

nothing was changed on inlet side (same as old setup and there was no issues), hot side has been changed and not running a cat to minimise restriction.

any ideas?

:/

Sorry no black cocks allowed

sorry, 300rwkw and under only Simon.

People with under 300rwkw like Black Cocks :whistling:

good news: it holds boost and i get my car back

bad news: it makes less power on 19psi (220rwkw) then it does on 14.7 (245rwkw).

nothing was changed on inlet side (same as old setup and there was no issues), hot side has been changed and not running a cat to minimise restriction.

any ideas?

:/

Got both graphs? Post them up

Got both graphs? Post them up

he's not sure if he saved the 19psi one, but ill def have the 14.7psi graph tonight.

torque goes up as normal and then drops off.

would vac/boost leak cause this?

if there was a leak, boost would not hold, or would it?

i will get more info tonight as he only briefly discussed the issues over the phone.

sorry, 300rwkw and under only Simon.

good news: it holds boost and i get my car back

bad news: it makes less power on 19psi (220rwkw) then it does on 14.7 (245rwkw).

nothing was changed on inlet side (same as old setup and there was no issues), hot side has been changed and not running a cat to minimise restriction.

any ideas?

:/

WTF? :rant:

torque goes up as normal and then drops off.

would vac/boost leak cause this?

if there was a leak, boost would not hold, or would it?

If you remember Mick_O's midget with a trumpet saga, I was actually there the day it was diagnosed (I actually found the midget lol)

His car was still pissing in 300kw with the IM gasket blown between the plenum and the runners, in fact when it blew right out I dont think it was really that down on power. Boost curve didnt look right (coz it was trying hard to compensate) but other than that power was still there.

Im inclined to think you have some sort of a turbulence issue. It would be really good to see ARTZ crank 19psi right now...

If you remember Mick_O's midget with a trumpet saga, I was actually there the day it was diagnosed (I actually found the midget lol)

His car was still pissing in 300kw with the IM gasket blown between the plenum and the runners, in fact when it blew right out I dont think it was really that down on power. Boost curve didnt look right (coz it was trying hard to compensate) but other than that power was still there.

Im inclined to think you have some sort of a turbulence issue. It would be really good to see ARTZ crank 19psi right now...

yeah i read about that in his thread,

so pretty stumped right now as to what it could be.

will find out more info tonight.

im booking it into Jez in May to get it looked at. i've had enough dramas with this tuner, its time to move on.

May is two whole months away, r u serious? lol

going on holidays next month so nothing can be done until then

I ordered my smoke machine intake tester this morning. Bloody expensive thing but i think it will be a good investment. I charge 100000000 per test. U guys reckon thats fair ? :D

that's cheap as!

What clutch do u Have? Its possible it was slipping or wheelspinning.

if it was slipping or wheel spinning, he would be able to tell.

cant remember exactly but it was a Exedy heavy Duty something something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...