Jump to content
SAU Community

Recommended Posts

so the official response from Kando is this

td06 - 9 blade: 179g

td06 - 11blade: 220g

overall difference in spool is negligent for $350. No difference in flow wise the advise

Its still a 41g weight saving and you will be 350$ lighter....should have yourself a 10second car now

Has anybody used one of these on an rb20 before? I'm almost keen to give one a shot due to the bolt-on/standard look factor.

http://www.ebay.com.au/itm/Upgrade-Turbocharger-RB20DET-RB25DET-w-Stage-3-Turbine-68mm-Comp-450BHP-/281199995072?pt=AU_Car_Parts_Accessories&hash=item4178d368c0

Would I expect it to behave similarly to a TD06-20g, maybe slightly slower to come on?

I currently have one on my freshly swapped RB20DET S13.

I don't know how a td06-20g spool on a rb20, but this one comes on boost in the low 2000 rpm and hit 0.5b before 3000rpm.

This is with FFP, standard cast exhaust manifold, ceramic coated turbine housing and complete 3" exhaust system, stock ECU, stock tune and stock injectors.

I don't know much more right now.

No dyno yet and no one planned.

I just finished the car, i have a lot of things to do to make the engine bay neater, the PAS pump just died on me and I have to sort the AAC valve getting continuous 12v.

I'll be running the max boost I can with the stock MAF/injectors when I'll get a tune.

Unfortunately it won't happen before several months.

I did some slight pull yesterday, the turbo pulls very well, my cluster isn't working (an other thing to sort), so I can't give you any rpm to boost numbers, the speedo is climbing a little to fast to do the math and know at wich rpm the engine is. :P

I don't know if the turbo is creeping or if kando rate their actuator a little low but I hit 17 psi. :wacko:

The spring is rated 15 psi, and I have the least preload I can have on it.

I'll get a softer spring ASAP and let you know how things goes.

I had an CA18 with a GT2560R and a tune in that car before. The RB is a little less responsive down low, but a lot more anywhere more than say 3500 rpm or so.

i made 235kw with the kando highflow on e85 at 19 psi on a rb20det... tunner says the turbo spikes and if i weld shut the internal gate and add a external wastegate i could see 250+kw...

Hey mate please give us more detail on your car and setup, and provide a dyno sheet if you could!

We can try help you see better results, and the details are always good to share for other members.

RB20DET Internally stock

990 cc injectors

Blitz return flow intercooler

standard exhaust manifold

turbo back 3 inch all the way thru to zorts

split fire coil pack

044 bosh intank fuel pump

Ems ecu

united E85

KINUGAWA rb20/25 highflow with adjustable actuator set at 20psi but spikes down to 18 psi

Greddy EBC (apparently malfunctioning) boost set from actuator...

Nice power curve. :)

The pressure tapering down to 18psi is certainly due to too much exhaust back pressure blowing the flapper open.

Fixing your greddy EBC should place the power right where it should be at high rpm. :)

I had an CA18 with a GT2560R and a tune in that car before. The RB is a little less responsive down low, but a lot more anywhere more than say 3500 rpm or so.

what it loses in response it makes up in torque....and everybody knows torque wins races

RB20DET Internally stock

990 cc injectors

Blitz return flow intercooler

standard exhaust manifold

turbo back 3 inch all the way thru to zorts

split fire coil pack

044 bosh intank fuel pump

Ems ecu

united E85

KINUGAWA rb20/25 highflow with adjustable actuator set at 20psi but spikes down to 18 psi

Greddy EBC (apparently malfunctioning) boost set from actuator...

Thanks for providing that!

What core is in the highflow? TD05/06 16/18/20G?? Regardless of which one the power is low for E85, but telling us which turbo will help me understand how far off target you are.

You should try have your tuner turn the motor a bit longer... RB20s aren't shy at revving to 8k in some cases, and a fiddle with some adjustable cam gears may help you broaden that powerband a fair way.

The only Kando hybrid I know of is a 20G on a T3 turbine wheel in Nissan (based?) housings - bit of a weird combo imho, and 20G probably never going to justify itself in this kind of setup. 16G would have given this power!

The only Kando hybrid I know of is a 20G on a T3 turbine wheel in Nissan (based?) housings - bit of a weird combo imho, and 20G probably never going to justify itself in this kind of setup. 16G would have given this power!

They have recently built a skyline specific TD range, but I am not sure if anyone has one yet.

Will wait to see what OP comes back with!

Lithium are you refering at my results? are you saying i should be getting td 20g power level? by the way my tuner was kind of shy trying to push the rb20 he only wanted to go max 18 psi but i kept pushing for 21psi... he was very concerned about reliabilty of the motor...the car was tuned at in car racing in wetherill park the car.

any recomendations to get a bit more power? do you guys think i could crack 260kw if i add external wastegate? adjust the cams? and go to a different tunner? JEM maybe ? i dont think incar racing was up to scratch with the tune.. when i mentioned to play with my adjustable cam gears they said it would make no difference and thats when i knew he was probably not the best tunner to take my car.. only went there because my mate works at the place...

any recomendations to get a bit more power? do you guys think i could crack 260kw if i add external wastegate? adjust the cams? and go to a different tunner? JEM maybe ? i dont think incar racing was up to scratch with the tune.. when i mentioned to play with my adjustable cam gears they said it would make no difference and thats when i knew he was probably not the best tunner to take my car.. only went there because my mate works at the place...

Get a hypergear high flow or a ss1pu, then take it back to your tuner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...