Jump to content
SAU Community

Recommended Posts

Very nice :rant: How are u feeling with that kind of power and stock internals?

Is the car driven often? How many KM are on the engine? Whats minimum boost you run?

What boost is the efficiency range of the 3037?

And whats the approx cost of the 3037?

  • Replies 125
  • Created
  • Last Reply

Top Posters In This Topic

Fair bit of extra piping, WTF???? dude, it could be 300 metres long and it would make stuff all difference, if you look at the stock plumb back pipe its actuall about the same lenght as mine, and FYI, it IS a plumback BOV.

Knore, no probs, stock internals are fine (decompress the engine thought), daily driver that gets regular doses of WOT. Car did around 10,000kms on that turbo ( a bit under actually). Boost, efficiency is around 0.8 to 1.2, thats where they really seem to do amazing things.

3037, depending on where you buy them, between 4-6K new

Steve the turbo you used was a normal HKS GT3037 with a .87AR exhaust housing ? Does this mean the manifold and exhaust housing have the T28 flange ?

I was wondering about trying one of these (Garrett version same wheels) with a 1.06 housing on my RB26/31 . Most people are saying the GT37 compressor won't keep up with three litres so go a GT35R . Whats your opinion ?

Cheers A .

discopotato,

It's common to run twin 3037's on the Rb26 for 800hp applications, so I think a single would be a bit breathless.

Steve,

Finished the engine build, and it's incredibly strong, pulls from way low down and is much more driveable than it ever was. It's got a really relaxing delivery, with a stupidly wide power band.

But then I took it back off the road, to fit larger injectors, a proper fuel system, and practically all of the Earls hose and fittings catalogue. It's got the 'show' and all it needs now is a proper tuning session to complete the 'go'.

I'll post details when it's all together, shouldn't be much longer now.

Oh Steve - stocking it hey..... Bummer.

All that time and $$ you put into it - I feel for you buddy - Must have been a hard decision.

I've been thinking the same - or at least selling the car complete and moving to the next project - But then I think of all the dam $$ i have spent on it and just can't bring myself to do it...........

Good luck with it man.

Steve the turbo you used was a normal HKS GT3037 with a .87AR exhaust housing ? Does this mean the manifold and exhaust housing have the T28 flange ?

I was wondering about trying one of these (Garrett version same wheels) with a 1.06 housing on my RB26/31 . Most people are saying the GT37 compressor won't keep up with three litres so go a GT35R . Whats your opinion ?

Cheers  A .

Hmm, well it was the 3037S 56T, yes it was GT25 flange.

Doubt it would be breathless - with a 3L bottom end, you could easily achieve 350rwkw (veilside has had 700rwkw with two 3037s on a 2.7L rb26).

Combined with the 3L torque, it would be quite formidable as a street package. Hell, I had 321rwkw, not in shoot out mode on a 31deg C day with dyno dynamics dyno. I had to spend alot of money to get traction, and even then managed to light up the rears at 100kph without any problems at all. If you want early power, use the 0.87 housing, if you want a bit more sanity, larger would be better:)

I wouldnt recommend garret, I have seen a few GT30s (garret) that start boosting hard around the same place mine did, but with a 0.63 housing - compared to my 0.87. HKS turbos come in early, and dont really run out of breath from what I have seen - as long as you dont run the boost out of the efficiency range. If you think that some local company can produce a turbo that does as well as a HKS - good luck.

Here comes the old 'garret is as good as HKS' debate, but imo, you are fooling yourself if you think so. dont scrimp on a turbo, it is the heart of a turbocharged car.

JasonO, good to here, hurry up:)

B-man, yeah it was a bit painful, but there was no way I was going to sell it to someone at a fraction of the worth - and I got more money this way. the worst part was it was setup just nice, handled really well and was an absolute pleasure to drive, peak hour or on open roads. I miss it already:( dont think I will ever own a better car.

  • 2 months later...
I know of a rb25 making approx 320rwkw with standard internals. How ever, i have only seen s2 motors make over 280rwkw on standard internals and hold up

It wasn't really a standard RB25. Sure it had stock internals but it did have a lower comp ratio (thicker headgasket) and also had a lower dynamic comp ratio as he was running larger cams.

All of which help to aid off the nasty detonation that kills the Rb25's cast pistons.

I don't think it was even really driven that much. :(

I know of a rb25 making approx 320rwkw with standard internals. How ever, i have only seen s2 motors make over 280rwkw on standard internals and hold up

So is there much of a difference between Series 1 RB25s & Series 2 RB25s.... I've got a 1995 r33 Series 1.5, which engine does that have...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...