Jump to content
SAU Community

Recommended Posts

Hello mates,

I am planning on buying a CF vented hood to reduce some weight but not sure about it. Is it save to drive in the rain with an opening like that? It looks like the water will just poor down on the belts and alternator. My car is daily driven and i dont have a garage to park it in.

I did a search but couldnt find anything, if anyone can point me in the right direction.

Thanks.

  • Nope 1
Link to comment
https://www.sau.com.au/forums/topic/348707-vented-hood-in-the-rain/
Share on other sites

water also comes up from underneith... and no problems there?

Is that weight saving really going to make your 'street' car any faster... 60km/h is still 60km/h.

You'd be better spending that money of a gym membership and losing weight that way (not saying your a chubsy whubsy... just that people can weigh between 70 to 120kg's)

  • Nope 2

As long as the vents were not directly above the exhaust manifold and intake filters that it shouldn't be too much issue,

There are quite a few manufacturers that include bonnet vents from factory and some of these like the Toyota Celica vent their directly above the turbo and alternator without affecting the vehicles reliability.

if the Bearings on your alternator, power steering, and air-conditioning were subjected to lot of water you may find they would wear quicker but I doubt it's going to be that obvious.

Also watch out for water that gets into the valley where the coils are as the plugs will rust and the moisture will work its way into the boots and cause a missfire, it happened to me.

Thanks everyone for the honest replies, i was just a bit concern and didnt want to ruin my engine which i rebuilt. My plan to reduce weight for this "street" car is for when i'm ready with my new setup i can head up to the drag strips and have some fun there.

And to Mr Barraspalding, thanks for caring about my weight, but i already have a gym membership pass and i go there 4 times a week. Next time if you care so much why not ask first instead of being an ass...

water also comes up from underneith... and no problems there?

Is that weight saving really going to make your 'street' car any faster... 60km/h is still 60km/h.

You'd be better spending that money of a gym membership and losing weight that way (not saying your a chubsy whubsy... just that people can weigh between 70 to 120kg's)

  • Nope 1

I've had 3 different types of vented bonnets the 1st was good had the one vent which was centered over the top of the gap between the radiator and front of the engine. I never had any issues with water with this one.

DSCN0177.jpg">

I then changed to a CF Z-Tune style one and the quality was a bit average and had it fitted to the car for a day or two in the panel shop. After the car was outside and in the rain for a little there was water in the engine bay even with the 'tray' fitted (when i opened the bonnet the water collected in the tray spilt in the engine bay anyways)

I then got the Nismo carbon R Tune one which has the rain channels and no water gets into the bay at all as long as you dont point the hose directly in there. The quality of this is unreal..

IMG_2649.jpg"

This is only my expirence with them and im sure there are others who have never had any dramas with any vented bonnet. But living up here in Mackay the rain can be quite tropical at times coming in thick and fast lol..:D

Cheers

Kingy

  • Like 1

same experience as king.

if you can find one with the venting forward of the valley cover (coil and spark cover) you will be fine.

but if the venting is behind the cover you will get water in there when its raining and the car is stationary, while its moving you

will be fine.

The water falls between the engine and the radiator on this one.

g-force0011.jpg

water falls on front of the cover on this one while the car is stationary.

18072010135_clear.jpg

Edit...both of those are 3rd of the weight of the oem bonnet.

I've had 3 different types of vented bonnets the 1st was good had the one vent which was centered over the top of the gap between the radiator and front of the engine. I never had any issues with water with this one.

DSCN0177.jpg">

I then changed to a CF Z-Tune style one and the quality was a bit average and had it fitted to the car for a day or two in the panel shop. After the car was outside and in the rain for a little there was water in the engine bay even with the 'tray' fitted (when i opened the bonnet the water collected in the tray spilt in the engine bay anyways)

I then got the Nismo carbon R Tune one which has the rain channels and no water gets into the bay at all as long as you dont point the hose directly in there. The quality of this is unreal..

IMG_2649.jpg"

This is only my expirence with them and im sure there are others who have never had any dramas with any vented bonnet. But living up here in Mackay the rain can be quite tropical at times coming in thick and fast lol..:D

Cheers

Kingy

If don't mind me asking, where did you get the z tune style from and how much did the r tune set you back? :D

Thanks!!

they dont make a 33 GT-R one at Nismo

i run the genuine R Tune Nismo Omori bonnet on the 34. It does as stated have rain channels under the bonnet and is Dry Carbon

The best one for the 33 is the design by Top Secret imo, it works alot better, than the copies of the z tune for the "33"

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...