Jump to content
SAU Community

Recommended Posts

Hi Guys, I'm new to this forum but would like to try and get some answers please. I've been looking around at several dealers to buy a 2008 Skyline 370GT or later and whilst the pricing varies (give or take $5K) all the vehicles I've looked at generally have mileage under 10K. Now call me old fashioned, but this makes me very suspicious that the odometer has been wound back either in Japan or here, particularly since they are all 2007 or 2008 models. Is there any other logical reason as to why the mileage is so low or is my suspicion correct? Any help would be appreciated, as I don't want to end up with a car that has had 50-100K wound off the odometer.

Link to comment
https://www.sau.com.au/forums/topic/348968-imported-skyline-odometer-readings/
Share on other sites

I'd be requesting from the seller, the auction sheet, deregistration form for the car and also the service manual for the vehicle, K's marked on these should be consistant with the odometer reading. If the seller can't come up with one or more of these be very careful going ahead, personally I would walk away given the prices dealers are asking for these.

Less than 10000ks the car should look virtually new. No wear on pedal rubbers, switchgear and the like. Have a look around the driver's door jamb for signs of dealer service stickers (or remnants of) that may have been removed to conceal the true ks.

Thank you, your advice is much appreciated - knowing little about these types of imports what you have given me will be very useful. Thanks Again.

I'd be requesting from the seller, the auction sheet, deregistration form for the car and also the service manual for the vehicle, K's marked on these should be consistant with the odometer reading. If the seller can't come up with one or more of these be very careful going ahead, personally I would walk away given the prices dealers are asking for these.

Less than 10000ks the car should look virtually new. No wear on pedal rubbers, switchgear and the like. Have a look around the driver's door jamb for signs of dealer service stickers (or remnants of) that may have been removed to conceal the true ks.

Admittedly I was pretty skeptical myself when I was purchasing. I even came across a 2007 V36 with only 900km. According to my agent, extremely low km cars come up a lot and is normal.

In the end I purchased a 2007 with ~6000km. Was told by the agent that the condition was consistent with kms. When I got the car, they weren't kidding. Interior was basically brand new, even with the smell. Service manuals also looked legit and were consistent. Paintwork was a bit worn, not bad, but not great. I put that down it being a black car, and most likely the car spent most it's time outside. Nothing a weekend with meguiars couldn't fix.

Even the compliance workshop commented on how new it looked. Actually made it easy for them to comply and get it through quickly.

It probably pays to use a reputable agent for that assurance. I used prestige motorsport and they were first class. Highly recommended.

Edited by SyKRyD

Thank you for your comment and advice, it's also appreciated.

Admittedly I was pretty skeptical myself when I was purchasing. I even came across a 2007 V36 with only 900km. According to my agent, extremely low km cars come up a lot and is normal.

In the end I purchased a 2007 with ~6000km. Was told by the agent that the condition was consistent with kms. When I got the car, they weren't kidding. Interior was basically brand new, even with the smell. Service manuals also looked legit and were consistent. Paintwork was a bit worn, not bad, but not great. I put that down it being a black car, and most likely the car spent most it's time outside. Nothing a weekend with meguiars couldn't fix.

Even the compliance workshop commented on how new it looked. Actually made it easy for them to comply and get it through quickly.

It probably pays to use a reputable agent for that assurance. I used prestige motorsport and they were first class. Highly recommended.

I used Prestige Motorsport too, Geoff is great.

My DEC 2007 V36 had 10,600kms on it, as per the auction sheet and the service manuals. Mind you I paid a bit more at auction for such a low KM car, the value IMO is to be had with the ones with 'high' KMs. One similar spec/colour sold with 50,000kms for considerably (i.e. $15k) less. If it's well looked after that's somewhat irrelevant.

I wouldn't touch a local one if they didn't have books or auction papers, cars that new should almost always have them.

  • 2 years later...

Looks like you've already got all the information you need, it's not uncommon for these cars to have very low km's coming from Japan where they don't do alot of driving especially if the car lived in the city.

Most important thing i think would be just determining how clean the interior is for it's age & km's check common wear parts of the car such as tears in the leather, possibly a bit of wear on the gear knob, steering wheel then overall condition.

goodluck

also you should have the auction sheet and the inspections sheet. My car had two inspections and the KM's lined up over all of that time. Mines done 80,000 over 10 years now which is pretty high, but it was from a more regional area of Japan

Umm. I think you are replying to Haxorz's post made 2 years ago..

manc01 just jumped in to ask how easy it is to adjust the odo..

Not sure exactly, but I believe most tuners would have access to the tools required to adjust the odo to whatever they want. Like with all imports, you should check other items for wear, this will help identify a false Odo reading..

How is the odometer actually wound back? If it is as common as everyone seems to think then it must be pretty simple??

Electronically.

One of the guys came across an item in yahoo Japan auction the other day that was a service to wind back the clock. If the condition of the car doesn't match whats in front of you, then its been wound.

There are other things like De-Reg certs that capture the kms based on the last 3 years (I think), and of course the auction sheets for the car.

But really, what does it matter - buy off condition rather than the number on the dash. We all know most of the dealers wind it back. Its no big surprise.

brakes are a good thing to check too.. if it shows 10,000km on the odo, but has 'lipped' brake rotors.. you will know something is wrong..

not really, I heard v35's chew through rotors like no tomorrow.....it's not uncommon to see lipped rotors on only 20000-30000kms if it was driven hard...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...