Jump to content
SAU Community

Recommended Posts

Hey guys,

Well, I've decided that this year I'm going to stop 'talking' about doing something to my R33 and actually 'do' something to it... So first is first, the engine. I've been told, but I'm not 100% positive that it would work...

The plan so far is...

40 thou oversized pistons

'H' Beam rods

R33 RB26 crankshaft

JUN oil pump

New Water pump

Bigger oil sump

Garrett GT35/40

Front-Facing plenium

Bigger throttle body

Headwork to suit with decent size cams.

That's the basics so far... I've been told and read that this plan should work, however I've also been told and read online that the RB26 crank doesn't fit. Any help would be awesome. I'm not after Horsepower Hero status, I just want a gutsy road car I can have fun on the track with.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/
Share on other sites

what about just do the turbo, ECU, injectors, fuel pump, wait for the engine to break and then rebuild???

I wouldnt worry about using a 26 crank, if your not after horsepower hero status...

Why do you want a bigger throttle body?

bigger oil sump, do you have an oil cooler as yet?

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5611980
Share on other sites

Hey guys,

Well, I've decided that this year I'm going to stop 'talking' about doing something to my R33 and actually 'do' something to it... So first is first, the engine. I've been told, but I'm not 100% positive that it would work...

The plan so far is...

40 thou oversized pistons

'H' Beam rods

R33 RB26 crankshaft

JUN oil pump - Check out the Nitto Oil Pump, cheaper and flows the same or better then the Jun, and it's Australian.

New Water pump

Bigger oil sump

Garrett GT35/40

Front-Facing plenium

Bigger throttle body

Headwork to suit with decent size cams.

That's the basics so far... I've been told and read that this plan should work, however I've also been told and read online that the RB26 crank doesn't fit. Any help would be awesome. I'm not after Horsepower Hero status, I just want a gutsy road car I can have fun on the track with.

Thanks.

Yes it does fit, I am going down the same path later this year. I have a R34 GTR crank, and I need to buy RB26 pistons (going 20 thou, 86.5mm) and some forged con rods. The RB25 and RB26 blocks are very similar, the major difference is the stroke of the RB26 over the RB25.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612038
Share on other sites

At the moment the only things the ol'girl has is a 3 inch exhaust from the cat-back, boost 'T', coilovers and mags... I only put the coilovers and mags on it. I'm buying a seperate engine and everything I need in the next few months. I just want a safe-going, gutsy engine.

Thanks for the information, Aberax. Is there anything specific I need to do to make it all work out, crank wise?

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612187
Share on other sites

Only important if you need them - plenty have not required them for over 350rwkw.

Rob - what is the budget/plan/use of the car etc?

A 3540 isn't the best choice for a street car in all honesty, no do you need to spend the extra on rods etc.

The parts list is a bit all over the place. Lots of stuff you need isn't on there, lots of stuff you don't need is...

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612214
Share on other sites

2.6 and 2.5 blocks are the same . thats why rb25det blocks have 2 oil feed lugs cast into them

rb26 has longer stroke and lower piston crown height

so if your using a 26 crank you need pistons for a 26

con rods are same dimesion

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612218
Share on other sites

The plan is to have a nice cruiser that I can go to the track and thrash around without worrying a lot about something major to go faulty. That's why I want to strengthen as much as I can. I plan on working the heads and having stronger valves and springs too. 35/40 just seemed to be a good choice for the track/strip but I'm open for suggestions.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612403
Share on other sites

Rob, Check these links out

SAU Topic - Garrett GTX Turbos

Garrett Website - GTX3076

There relatively new but look like a good thing. I just think you will be disapointed with the 35/40 in comparison to something like these. But hey its up to you.

If your not doing anything tomorrow give me a txt

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612445
Share on other sites

The results from the GTX so far have not proved they are better at all... More power but more lag; who would have thought?!

Go with what is proven to work you don't need expensive fancy parts to go fast.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612486
Share on other sites

I think your parts list is good, you need rb26 pistons with the rb26 crank. I would get premium valve springs supertec/tomei.The nitto pump is fine. Probably better than the Jun.

Edited by WHITE gtt
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5612511
Share on other sites

Only important if you need them - plenty have not required them for over 350rwkw.

Rob - what is the budget/plan/use of the car etc?

A 3540 isn't the best choice for a street car in all honesty, no do you need to spend the extra on rods etc.

The parts list is a bit all over the place. Lots of stuff you need isn't on there, lots of stuff you don't need is...

This! What is your budget? Your looking at an easy 10-15k plus the headwork and parts for the head.

So let's say 20k-ish plus because you have to buy all the parts including the turbo. Still keen?

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613249
Share on other sites

At the moment the only things the ol'girl has is a 3 inch exhaust from the cat-back, boost 'T', coilovers and mags... I only put the coilovers and mags on it. I'm buying a seperate engine and everything I need in the next few months. I just want a safe-going, gutsy engine.

Thanks for the information, Aberax. Is there anything specific I need to do to make it all work out, crank wise?

Have everything machined, cleaned and balanced correctly. Have your block decked, bored, honed, also have the main tunnel machined, good bearings ACL (I am going 20 Thou RB25 ACL Bearings), acid dipped. Get the Crank grub-screwed, cleaned and balanced along with your conrods and pistons (as they all are apart of the rotating mass). Make sure the clearances for rings, piston to bore are within tolerances, bearing crush is within aswell.

Crank, depending on how big the oil drive is, you may want to get a oil collar installed too. Also look into doing some oil control too.

A engine build is never really "cheap", I have done a rough calculation for my build, parts alone are around the $10k mark, then machine shop cost on top.

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613402
Share on other sites

Money isn't a problem for me at all. The Fiance and I have an agreement that we're not getting married until my car is done... So she is helping me out as much as she can too, haha. ;)

Thanks guys, this means a lot. I'll make sure I keep updating when I start working on it. Keep you guys in-check with the progress. :)

Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613537
Share on other sites

Money isn't a problem for me at all. The Fiance and I have an agreement that we're not getting married until my car is done... So she is helping me out as much as she can too, haha. ;)

Thanks guys, this means a lot. I'll make sure I keep updating when I start working on it. Keep you guys in-check with the progress. :)

Lol then Godspeed buddy.

Make a project thread ;)

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/349279-rb25-build/#findComment-5613878
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...