Jump to content
SAU Community

Oil Analysis Victoria - What Are Your Experiences?


Recommended Posts

I'm keen to get a sample of my engine oil tested by an oil analysis company. Something like this - http://www.oilcheck.com.au/pricing/oil-analysis-price-list.html. I used some thin (5/30) oil for a track day and thinned it out a bit further than I ever have before, just wanted to get some piece of mind :).

Just interested to know if anyone else uses these services in Melbourne and if so who do you go to and why?

Duncan used that one I think. There was a very recent post, in the last week or two on it and what he got back.

I've put an order into:

http://www.e-monitor.com.au/

But no response yet, I also need to buy some more oil...anyone else want oil from performancelub in the South East? :)

I can find out who we use on ours and our customers turbine engines for trend monitoring. Fairly comprehensive considering the engines assemblies are worth over $500k. The company we use is possibly Mobil?

If you have oil pressure I wouldn't worry to much about it. Just cut your filter open and have a look at it. If theres no material in there just keep using it. If it does come back as a bad result are you really going to care on a motor worth $500 if you have a rb20. Their pretty much an indestructible motor. Mine survived a few calder drift nights and a near by others along with several trackdays considering it had a dodgy DrDrift tune that had my limiter set a 9000rpm which I only found out later. The motor out lasted the rb26 I put in it. Rb20's are strong and it will keep going.

This is for my 26 :P.

Yeah Duncan's thread has given me inspiration, for 40 dollars it's really value for piece of mind :), far better than suck it and see and lunch the thing.

  • 1 year later...

This is for my 26 :P.

Yeah Duncan's thread has given me inspiration, for 40 dollars it's really value for piece of mind :), far better than suck it and see and lunch the thing.

Suramatix, I'd be interested to know how you got on with them perhaps you could drop us some feedback or even put up the report.

Alternatively, a mate of mine at work swears by roktex.com.au apparently they offer an easy to use kit with postage paid mailing back to the lab for under $30 with reports stored on their database for trending. I might give them a try. :thumbsup:

  • 2 weeks later...

Suramatix, I'd be interested to know how you got on with them perhaps you could drop us some feedback or even put up the report.

Alternatively, a mate of mine at work swears by roktex.com.au apparently they offer an easy to use kit with postage paid mailing back to the lab for under $30 with reports stored on their database for trending. I might give them a try. :thumbsup:

They were very easy to deal with and the report was quite detailed. I would mention that you shouldn't waste your time with 1 sample, plan to do a couple, because a lot of the information they derive is based on the change in the levels of various metals etc.

  • 12 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...