Jump to content
SAU Community

Recommended Posts

just wondering how long this motor should last kms etc before i should look at doing something ?? i just bought the car and was wondering thats all cause i dont want to break anything some help would be much appreciated

thanks.

ENGINE: *CP pistons probs more but cant think !!

*Eagle rods

*N1 oil pump

*Tomei sump baffles

*Tomei headgasket

*Tomei oil feed restrictors

*custom oil drian from the rear of the head to the sump

*balanced crank

*acl race bearings throughout

*N1 water pump

*Apexi cams ( not sure what lift)

*Aftermarket vavle springs

*Hks cam gears

*Hks timing belt

*Bigger Fuel pump

*700cc sard injectors

*adjustable fuel reg

*Nisstune ECU

*twin Garrett 2860-5s

*Huge intercooler

*Alloy radiator

*Front sway bar

*middle sway bar ( in photo of interior)

*rear sway bar

*Bilstein coilovers

*torque split controller( not working at the moment will try to get fixed before sale)

*drilled rotors

*gauges, oil pressure, boost

*Alpine headunit

*Alpine 6x9s

*oil filter relocation kit

Edited by danny14
Link to comment
https://www.sau.com.au/forums/topic/351052-32-gtr-forged-engine/
Share on other sites

If it was built right it should last as long as your usage implies.

If you pump your -5s to max capacity and run it on the knifes edge on the track every day of its life, you will get about as long a life span as you would any other race motor before it needs rebuild (not very long at all). Yet if you were to daily it and take exceptional care of it I anticipate it would possibly last as long as a factory built motor.

I would probably change that N1 oil pump to a Nitto or JUN item though, that is the weakest link at present.

The only way to know would be to strip it down which kind of defeats the purpose.

Who knows it could have been slapped together on the grass in someone's back yard with all the tolerances wrong and it might last a week, it could have had everything done perfectly at a shop and then run with no oil, or everything could be fine and it could last 100,000kms?

the speaker part was not ment to go in i just pasted and copied page lol...

the oil pump is it really a problem i drive it maybee 3 times a week and i dont thrash it everywhere i go. everything feels tight

it currently makes 314 kw but has made 450 kw with the old ecu that was pfc it now has a nistune because of defect

well.. if its lasted 3 years and is still running sweet today, not burning oil etc, im sure its been built some sort of standard - but as said earlier, it could go bang 2moro or could go for another 5 years - too many variables!

ok apparantly it didnt... saysss im just goin off what the original owner that built it from ice performance told me................................ thats all im not making up shitttttt if thats what u think

do u have any proof that the engine is even built? or did he just hand u receipts from when his friends, friends built a motor.

common misconception is that building a motor gives u fully awesome big power, when all it does is make the engine components stronger.

sure u can make 650rwhp and the motor will last 12months or you can run the same motor at 300rwhp and last 10years

  • Nope 1

do u have any proof that the engine is even built? or did he just hand u receipts from when his friends, friends built a motor.

I'd be thinking a similar thing.

If it was from ICE down here in Vic, I'd be even more worried... There were plenty of no-so favourable experiences that myself and several friends went through before they shut doors.

ok apparantly it didnt... saysss im just goin off what the original owner that built it from ice performance told me................................ thats all im not making up shitttttt if thats what u think

Defensive much? Perhaps those posters are thinking that whoever told you it made 450 is a liar, and therefore you cannot trust anything else this person has said to you.

Also

*middle sway bar ( in photo of interior) <= WTF??!!

*torque split controller( not working at the moment will try to get fixed before sale) <= if the controller doesnt work it will be taily but still put torque to the front wheels. If it doesnt, it could be expensive to fix.

*drilled rotors <= likely to crack with track use

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...