Jump to content
SAU Community

Recommended Posts

really like the first shot. a bit more light on the rear/top of car could have helped but the location.focus.composition are all tops! nice work.

never heard of that band/dj/whatever but they're some cool shots too!

You're shots are awesome J. It's a shame how all that panned out for you ;/ (pun unintended)

Hopefully sometime later on when your famous you can try to get back into it and see if you can turn a dollar. Papers who say they have no coin are liars. They make a motsa off the real estate section each week. I know most of that goes back to Mr Packer but still, they DO have budgets and can afford to pay for shots of your quality.

Nice colours Mikal. It's cold and lonely, makes me think back to my Pop's old garden after he got to sick to tend to it. My only critism is there's no single point of focus. It's just busy. there's lots of stuff all over the place but there's no one feature that over powers the rest.

Still, pretty good for a camera shot ;) When are you going to upgrade to a camera? Even a P/S like Jay uses.

Yeah that's true, the pitfalls of a phone camera haha.

I did intend on focusing on the tools but then that didn't really turn out, and I like the detail in the grass and such but then there's the problem of the photo being way too busy.

Well using a phone is quite fun and there are a few P&S cameras around the house which I could use, but maybe at the end of the year I could get back into the world of DSLR's.

Thanks for that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...