Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Hey yeah, I got all my bits OK :) A bit delayed because of bushfires, but they're all good thanks!

RB25 to go in the 33 is good to go now, putting that in on Monday.

RB25\30, progress is good, gotta save up for the machine shop work, then just re assemble it with some new bearings and new rings.

RB30e got yanked out Monday night, it got dark before I could rip the sump off and change the oil pump gasket and sump gasket. I might do that on Thursday afternoon.

Mega Super ultra powerful monster RB25 is still in the research and development phase at the moment, but I'm thinking. JE pistons with ceramic tops and teflon skirts, Nitto rods, balanced crank, nitto collar, ACL bearings, 12mm head studs, Bore and Deck block to suit, Grout filled block, all them oil control mods, Aiming for around 9.8:1 Static CR, still not decided on that really, NEO head some crazy cams and springs, yet to be decided. Not sure what turbo either, Looking for around 450kw though running on E85

I'm really undecided about the whole mega RB25, Lots of people say different things about what's needed for big power, like RIPS motors are like, near stock and good for like 500hp, and their built ones are insanely powerful. Put you look at everyone in the 400kw club here on SAU and they've got lots of mods.

First TSS round is in Mid March, I might go out to a drift practice day to shake the car down though, or maybe sprints, depends on how I go for time and what's on when I suppose.

Hey yeah, I got all my bits OK :) A bit delayed because of bushfires, but they're all good thanks!

RB25 to go in the 33 is good to go now, putting that in on Monday.

RB25\30, progress is good, gotta save up for the machine shop work, then just re assemble it with some new bearings and new rings.

RB30e got yanked out Monday night, it got dark before I could rip the sump off and change the oil pump gasket and sump gasket. I might do that on Thursday afternoon.

Mega Super ultra powerful monster RB25 is still in the research and development phase at the moment, but I'm thinking. JE pistons with ceramic tops and teflon skirts, Nitto rods, balanced crank, nitto collar, ACL bearings, 12mm head studs, Bore and Deck block to suit, Grout filled block, all them oil control mods, Aiming for around 9.8:1 Static CR, still not decided on that really, NEO head some crazy cams and springs, yet to be decided. Not sure what turbo either, Looking for around 450kw though running on E85

I'm really undecided about the whole mega RB25, Lots of people say different things about what's needed for big power, like RIPS motors are like, near stock and good for like 500hp, and their built ones are insanely powerful. Put you look at everyone in the 400kw club here on SAU and they've got lots of mods.

First TSS round is in Mid March, I might go out to a drift practice day to shake the car down though, or maybe sprints, depends on how I go for time and what's on when I suppose.

In a RWD platform you'd be crazy not to put a rb30 in. Extra torque for no extra cost in the build.

Just keep in mind that RIPS build and TUNE the motors that produce massive power. Although stock can produce great numbers, it's usually the oil issues that kill them.

Id only use a neo head if you were retaining VCT. Even then the available upgrade parts aren't as good and a 26 head would be easier.

RB26 doesn't have vct, it also means he'd have to bin the exhaust manifold as well as the intake, neo and 26 have solids but the neo has larger ports standard, neo head studs are the same size as a 30 bottom (RB26 are larger), you can get neo heads cheaper, easier and usually in better condition.

Its a pretty obvious choice, the only thing it doesn't get you is "RB26/30" as its name, which loses value regardless of performance :P.

Edited by SKiT_R31

RB26 doesn't have vct, it also means he'd have to bin the exhaust manifold as well as the intake, neo and 26 have solids but the neo has larger ports standard, neo head studs are the same size as a 30 bottom (RB26 are larger), you can get neo heads cheaper, easier and usually in better condition.

Its a pretty obvious choice, the only thing it doesn't get you is "RB26/30" as its name, which loses value regardless of performance :P.

Oh, it doesn't? Thanks for clearing that up. Mine does.

His intake won't fit either way. Head stud size doesn't matter.

Ports aren't bigger, they are shaped differently to previous 25's.

bigger is not always better when it comes to these heads.

The solid lifters are also not the same setup as rb26, with a shim on top of bucket.

He was talking about modifying cams etc. so the head wouldn't be taken off a wrecker motor and put on without first being checked. Then start getting upgrade parts for them....

Edited by jangles

Any RB head can run VCT, but 20's and 26's need the head modified to make it work.

Janges is right, bigger is not always better on the intake size. The correct size is always better.

Any reason you want to run a solid head? Brad has been reliably running 1000hp on a hydro head.

Any RB head can run VCT, but 20's and 26's need the head modified to make it work.

Janges is right, bigger is not always better on the intake size. The correct size is always better.

Any reason you want to run a solid head? Brad has been reliably running 1000hp on a hydro head.

Is it still a hydro head though?

Neo heads will spit shims in high rpm and kw applications.

Yeah I've been lead to believe that brads new motor has a neo head. And shimless buckets.

There is no doubt a 26 can have vct, but I'm not interested in doing the required modifications when just slapping on a neo head is a Shit tonne easier. Also neo heads have a smaller combustion chamber which will give me my desired compression ratio with my current pistons.

Plus they're cheaper.

Yeah I've been lead to believe that brads new motor has a neo head. And shimless buckets.

There is no doubt a 26 can have vct, but I'm not interested in doing the required modifications when just slapping on a neo head is a Shit tonne easier. Also neo heads have a smaller combustion chamber which will give me my desired compression ratio with my current pistons.

Plus they're cheaper.

standard maybe, you were talking about cams and all sorts before though on a super build.

Edited by jangles

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...