Jump to content
SAU Community

Recommended Posts

He guys i have a few performance bits for sale, i got defected lat nite so i reallly cant be funked anymore with this crap, some parts are only 2 months old, i will upload some pics tomorow thanks

here it is:

  • Garrett GT3076r IW turbo 0.82 rear housing 12psi actuator spring with all braided lines and custom made dump and intake, 3 in stainless dump, 3 inch intake with sili hoses clamps etc u may need some hose clamps and copper washers, direct bolt on to RB25, and also u will need a 10mm spacer and longer exhaust studs. for all this i paid more than $3000 i am asking a reasonable $2500 DEPOSIT TAKEN
  • Z32 air flow meter 2 months old with plug $200 SOLDDDD
  • Apexi PFC with hand controller to suit RB25 series 1 8 months old asking $1300 still for sale OFFERS need it gone
  • NISMO 555cc injectors with o-rings to suit Rb25 8 months old but used for only 2 months 1 nipple has cracked but no damage to injector u can get them from nissan dealer cheap asking $500 SOLDDDD
  • Splitfires coil packs to suit rb25 ser 1 8 months old asking $400 SOLD
  • K&N big air filter 3 inch neck few days old $50
  • Drift filter adapter few days old $15
  • Trust Profec-b boost controller 8 months old $200 SOLD
  • Trust turbo timer 8 months old $60
  • Automoter boost gauge really small one $50 SOLD

post-46081-1245228383_thumb.jpg

please pm me or better of sms for instant reply 0415 466 726

thanks

Borko

its time to sell the daily driver...

FOR SALE

1989 nissan pulsar gl N13

1.6ltr, 5 speed manual

251000k's

Red

It has remote central locking, band new front tyres. good rear tyres.

Recently re-gassed air conditioning.

just been serviced and no oil leaks.

excellant paint work no dents. brand new front and rear bumpers, grill.

clean and reliable, starts everytime.

$1800

post-9995-1245232647_thumb.jpg

post-9995-1245232746_thumb.jpg

post-9995-1245232857_thumb.jpg

post-9995-1245232976_thumb.jpg

Please pm or call me, mike

on 0416 085 323

Edited by trick
UPDATE!!!

Volk Racing F-Zero Trophy Rims (18x8,18x9)

Comes With Spacers, 2 Gold (1.5inch), 2 black (1inch)

Comes With All Bolts, 20 Normal, 20 Racing Fear (Includes Key), Includes Volk Valves,

All Center Caps, In Good Condition

Rims have been off car for 3/4 months now, and tires have been taken off.

Looking around $800o.n.o

DSC00491.jpg

HKS Turbo Timer

Good Condition

$50

DSC00513.jpg

Cannon 3.5 or 4.0inch I Think (Not Sure On Brand)

$50

Clear R33 Series 1 Garnish

Good Condition, No Cracks.

$30

ALL PRICES ARE ONO!.

NEED IT ALL GONE!

PM Only.

Hey buddy do you still have them volk's?

Moving house excess Golf Clubs Sale

Mizuno MP001 Titanium 400cc Driver with S Flex Exsar 60 graph shaft 45" in very good condition + head cover - $100

Taylor Made LCG 3-SW irons with S90 (firm flex) Rifle steel shafts/ standard lie + length - $350

King Cobra 5 wood (metal head) with Apollo R flex steel shaft - $30

Titleist 975D Titanium driver 260cc (I think) with S flex graphite shaft in good condition + head cover - $50

Taylor Made Bubble 2 Titanium driver 260cc (I think) with S Flex bubble 2 shaft in good condition + head cover - $50

PM me if interested

Feel free to make offers :D

16" meshies sold.

EOI:

r33 Series 1 Automatic transmission

111,xxx kms on it

Serviced at MV Automatics about a month ago came up sweet

Never had any dramas with it, shifts smooth

Looking for around $500

In my car atm, just seeing if there's any interest. Will be coming out in 1-2 weeks.

PM me if you want to know anything specific etc..

Edited by SkyHi_33

Still available

Garrett gt30/82 (gt30/40) .7 front, .82 rear, turbo approx 5000kms old, no shaft play, in as new condition, made 300rwkw on my rb25 340rwkw on e85, awesome midrange/topend power n torque

used with 6boost manifold n gate, full boost (23 psi) 4100rpm comes with 3 inch dump from turbo, $1500

BLITZ number plates (SA), gold lettering on black background. $500

For Sale:

Blitz Dual Turbo Timer

Out of my 33. Don't want it. PM me for it.

$60.

Still for sale due to time waster.

More info:

The pic above "for illustration purposes" is a tad misleading. My Impuls have no dish. See pic below.

Offsets look standard. I guess 38.

Width of the rims are 8.5" with 225/35/19 rubber on them.

skyline002.jpg

$1100 ono

:P

Still for sale or swap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...