Jump to content
SAU Community

Recommended Posts

have a do-luck kit for a R32. is black

has front bar, side skirts and rear bar.

front bar and left side skirt has crack (nothing major)

willing to swap for black type M side skirts, stock front bar and rear bar. plus some cash my way

price $350 ono

Edited by b0mb3rz

Random Items for sale

Red Led's for R32 dash conversion $20

4x Toyo T1R 225x50x16 with camber wear, 5-10% tread left $100

Hicas Control Unit $50

Carbon Style Plastic Cluster Surround $200

Tein Super Street Suspension $500

Series 2 R33 GTR Gearbox, Low KM's $1300

R31 GTS-X Spoiler - Plastic, in purple $200

Pics avail upon request, pm for more detail.

-D

BNR34 V-Spec Brembo brakes set.

Roughly 35000ks on them, brought with 25000k's on them.

Braided lines, Freshly machined fronts, QFM A1RM pads up front, Slotted rotors, Come with old Brembo pads for fronts. Fronts are 330x30 Rears are 300x24

Asking $2800 firm

post-38653-1267010962_thumb.jpgpost-38653-1267010766_thumb.jpg

Work XD9

18x10 +18 All round 5x114.3 in WMB

Have been around the track on, street driven. So has stone chips on etc

Tyres: KU36 235/40/18, probably need replacing soon but can drive on if need be. Could also throw in some Sumitomo HTRZ 2 235/40/18 if u wanna do skids.

Asking $2400

post-38653-1267011490_thumb.jpgpost-38653-1267011597_thumb.jpg post-38653-1267011750_thumb.jpgpost-38653-1267011826_thumb.jpg

post-38653-1267010677_thumb.jpg

R33 rear widebody guards/fenders - $250

Got em from viva 12hrs ago, fitted em on, they fit pretty well, need a bit of trimming here and there but same with any kit.

They retail for $300 brand new.

Theyre off the car, have a few holes in em where they were bolted on.

Change of mind before AJD, keeping the bolt on flares so my loss is your gain.

pm or call Marko on 0422 314 938

ITEM: Full R34 GENUINE NISMO Kit black

PRICE: Whole Lot $750 but must be bought before Thursday next week. Front bumper $500, Rear Bumper $400, Side skirts $250

CONDITION: Has some scratches, comes in factory black from a Jap import. No cracks what so ever, has grills. Rear bumper has white scrape mark but is not deep no scratches are deep.

Extra info: Genuine from Nismo not cheap fake copies hard to come by and very expensive... front bumper alone is selling for $900+ from wreckers, whole complete kit only $750 that's only if bought before I head overseas which is before Thursday. If not bought before Next week then i'd be raising the price from $750 to $1300.

Contact: Pm or call 72266895 (private number so starts with 7)

Will post pictures later within a few hours... Like i said i would like these to be taken off me ASAP.

post-70470-1267071106_thumb.jpg post-70470-1267071287_thumb.jpg post-70470-1267071362_thumb.jpg post-70470-1267071513_thumb.jpg post-70470-1267071613_thumb.jpg post-70470-1267071732_thumb.jpg post-70470-1267071787_thumb.jpg

Edited by Phuong

ITEM: Full R32 Bodykit

PRICE: $400 FIRM

CONDITION: Has scratches and chips, painted factory black but could do with a paint and some elbow grease.

Extra info: Came from Japan on my R32, car has since been parted out.

Contact: 0402 902 759 (matt) or PM

sdc10530e.th.jpg

sdc10529o.th.jpg

sdc10528.th.jpg

Also have R32 guards, factory black $150 for the pair

sdc10527.th.jpg

sdc10526.th.jpg

2x 1/10th scale nitro R/C drift cars.

-6x bodyshells

-2x hand controllers

-container full of spare parts

-heaps of spare wheels and tyres

-instruction manual etc

On ebay starting at $150 for the lot with no reserve.

Sorry i cant post the link as my work comp has ebay blocked. search for it, you will see :-)

0418 807 844.

2 pairs of Lightforce 170 Striker 12V 55W spot / driving lights

specific light dimensions etc available here: http://www.lightforce.net.au/products/driv...ghts/170striker

As seen on the roof bar of my Patrol, comes with heaps of extras to make sure you're ready to go

AS A COMPLETE KIT

4x 170 Strikers mounted to Rhino Rack heavy duty rack bar to suit GQ Patrol (excess overhang trimmed off the roof rack bar end)

Currently the lights are fitted with the Clear Spot covers, however i have 2 Crystal Blue Spot and 2 Crystal Blue Spot/Combo covers (combos for the outers, spots for the inners)

Roughly 3m of 6mm2 wiring (2x pos wires to paired outer / inner lights, 1x earth common to all 4)

2x 30a fused Narva relays

2x Narva dash switches

As the complete kit id be looking at $800

AS SEPARATE PAIRS - NO RACK BAR

1x pair 170 Strikers

2x clear spot covers

1x crystal blue spot cover

1x crystal blue spot/combo cover

1x 30a fused Narva relay

1x dash switch

For the pair with all the extra gear, im looking at $350

Not neccesarily for your skyline, but might be for a daily, a fourbie etc. Waterproof, shockproof, Australian made product.

Less than 12 months old, no damage has been sustained and all working

Contact: Via PM / Email

Pics

Clear covers

Photo007.jpg

Crystal blue covers (combo closest, spot directly next to it)

Image350.jpg

Light output

CameraDownload1583.jpg

Still for sale

R32 GTR ARC Super induction box, brand new $600

32/33 GTR Power FC with hand controller $800

HKS 550cc top feed injectors $450

PM or message me on 0413 697 162

All sold pending payment and pick up :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...