Jump to content
SAU Community

Recommended Posts

EOI

stock 34 gtt turbo 90ks

almost no shaft play... not of the car yet... as my new one is in the pipeline :D

ill have to check if the new one comes with lines n stuff.

will be off the car in a week or when ever someone really waves cash at me

$400

EOI

stock 34 gtt turbo 90ks

almost no shaft play... not of the car yet... as my new one is in the pipeline :D

ill have to check if the new one comes with lines n stuff.

will be off the car in a week or when ever someone really waves cash at me

$400

PM sent

FS.

R32 GTS-t Type M 4 Pot Front Brakes (280x30mm) - calipers, rotors, caliper hardline. - $150 SOLD

JJR Coilpacks (RB20, S1 RB25, R32/33 RB26) - approx 18 months old - doesn't misfire or any of that rubbish. - $250 SOLD

RB20DET Coilpack Loom - good condition, no misfires. - $100 $50

RB20DET Turbo + Exhaust Manifold - turbo good condition, I never had a boost controller so was running on stock boost. - $150

RB20DET ECCS Inlet Manifold - complete with injectors, fuel rail, throttle body etc. - $150

PM/SMS. 0438858813.

Hey everyone up for sale i have a BRAND NEW good quality oil water line kit to suit RB20/25 with a gt series turbo (low mount) such as GT30 or 35/40

Includes:

2x 60cm braided water lines in -6 with banjo bolt ends and barb fitting for hose that runs around back of engine

1x 40cm braided oil line in -4

3x M14x1.5mm banjo bolts

banjo bolt end and banjo bolt for oil line

90 degree -4 oil fitting and nipple that screws into turbo

all required copper sealing washers

and a few other various 90 degree fittings that arent needed but come with it anyway

Asking $100

was taken out of packet for pic only

th_016-2.jpg

ALSO i have a blown c34 stagea turbo with op6 exhaust housing asking $50 ono

PM or call 0417 899 445 cheers lockie

R33 Series 2 Coil Packs - 6 of them.

Upgraded to yellow jackets as one of them was starting to break down occasionally, rest are fine. No idea which one was breaking down, but you get all 6 so great for spares if you dont want to fork out $400 for yellow packs!

$80 for all of them. NE Suburbs.

Still available. Will take $50 for a quick sale.

For Sale

Inlet and Exhaust Cam Shafts with Cam Gears off of a RB25DET Series 1 out of a C34 Laurel.

Price: $150 ONO, pick up or local delivery. Price is for Cam Shafts & Cam Gears Only, Backing Plate will be taken off - once I figure out how.

Location: Aldinga, SA.

34480_136691673022046_100000436423638_302050_5680113_n.jpg

34480_136691676355379_100000436423638_302051_6177613_n.jpg

34480_136691679688712_100000436423638_302052_4086427_n.jpg

34480_136691683022045_100000436423638_302053_3651964_n.jpg

Got the following up for sale that i need gone, all located in the hills.

Genuine RB20 Water Pump - $80

Genuine RB25 S2 Water Pump - $120

^^ Both Brand New/Unused.

Cefiro Brake Master Cylinder, Looks almost new, hardly used - $50

HKS 2530 Turbo, in good working condition, minimal shaft play, nothing unusual for a ball bearing turbo. $1200 will be available by next weeekend as its still on my car.

Gizzmo EBC, later model with multi scramble feature. in perfect working order, removed due to not being needed. $150

RB20 Power Steering Pump and Alternator - $20 each

Pair of Enkei Circular wheels, PCD 4x114.3, 17x8 +34, in ok condition, few minor marks but nothing major - $250

Best bet is to contact me on 0407 633 573 as im not on here everyday, but PM's will be replyed to :yes:

Few Parts added, need these gone as i need the money!!

Edited by Jms_31
I have 2x gold drifttek for sale 17x8 5x114 not multi stud, not sure of offset but im guessing around the +34 mark comes with 255x40 rubber used but good, some light scratching on i think both rims will get pics up later

$550 all offers looked at, not all accepted

EDIT

because of where the car is parked i could only get a photo of the drivers side

colour, size, offset pics

post-13315-1277284505_thumb.jpgpost-13315-1277284521_thumb.jpg

post-13315-1277284529_thumb.jpgpost-13315-1277284534_thumb.jpg

post-13315-1277284540_thumb.jpg

for description of Hero tyres see >>Here<<

UPDATE 1 rim no good so price drop

1x 8.5" gold Drifttek $150

2x 255x40x17 $200

post-13315-1278672689_thumb.jpg

Hey everyone up for sale i have a BRAND NEW good quality oil water line kit to suit RB20/25 with a gt series turbo (low mount) such as GT30 or 35/40

Includes:

2x 60cm braided water lines in -6 with banjo bolt ends and barb fitting for hose that runs around back of engine

1x 40cm braided oil line in -4

3x M14x1.5mm banjo bolts

banjo bolt end and banjo bolt for oil line

90 degree -4 oil fitting and nipple that screws into turbo

all required copper sealing washers

and a few other various 90 degree fittings that arent needed but come with it anyway

Asking $100

was taken out of packet for pic only

th_016-2.jpg

ALSO i have a blown c34 stagea turbo with op6 exhaust housing asking $50 ono

PM or call 0417 899 445 cheers lockie

pm sent

For sale are some Items off my 98 r34 gt-t

HKS GT 2540-46T, hasn’t done many Km’s upgraded to a bigger garret $1200 ono+shipping

Greedy 600X250X70 return flow FMIC, includes everything you need, clamps, joiners $320 ono+shipping

Stock rotors, plenty of meat left $50 each ono+shipping

Other items include

Qfm A1rm semi track pads 80% left $40+shipping

Stock r34 gtt brake lines $50+shipping

Stock intercooling piping$40+shipping

Located Port noarlunga S.A

0405326532

Please ask for pictures!!!

Hey all. I have a set of black drift teks for sale. They are 17x8 and 17x9 multi stud to suit Nissan. Tyres at 50% all round.

Asking $950 for the set.

Also have a Nintendo Wii package which includes:

Nintendo Wii with all fittings

2x Controllers with 2x nunchucks

Da Blob

Need for Speed undercover

Super Smash Bro's brawl

Wii Sports

$350 for the lot there

All items located at dernancourt SA.

Contact me on 0402 035 914. Can mms pics

Edited by Mowbuss

Bump

EOI

stock 34 gtt turbo 90ks

almost no shaft play... not of the car yet... as my new one is in the pipeline :P

ill have to check if the new one comes with lines n stuff.

will be off the car in a week or when ever someone really waves cash at me

$400

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...