Jump to content
SAU Community

Recommended Posts

SOLD!

HKS Coilovers

I have for sale some HKS coilovers for a skyline r33 GTST the fronts are hyper 'd's and the rears are hypermax.

They have been resealed with new seals and new oil and nitrogen gas approx 15000kms ago.

I have taken them out of my car because the rears have a slight tick every now and then (depends on road). It sounds like the pillow balls are slightly worn.

I also noticed after taking out one of the rears it has about half a cm of gas in top of tube when shaft is fully extended you can hear it squelch a little.

There are no leaks and still have gas.

These would be great for a track or drift car.

They dont come with and C spanners or keys. The dampning can be done with a 3mm allan key.

They are as is in the picture. Thats about it. You are welcome to have a good look. Located near Parafield Airport

Asking $700

PM me or 0427999093

http://i533.photobucket.com/albums/ee334/r...ds/P1050375.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050376.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050378.jpg

got some 5 stud WORK rims for sale

THERE CALLED WORK TEMIST,

have very good tyres on them like 85%

AND NICE AMOUNT OF DISH

there 5x114.3

19x9.0 +15

19x10 +10

right front has slight dent but still holds air

pic's don't do them justice, look sick in the flesh.....welcome to come check them out

$1500....pm or text me on 0402613042......located in mansfield pk

post-70223-1279610974_thumb.jpg

post-70223-1279610998_thumb.jpg

post-70223-1279611025_thumb.jpg

post-70223-1279611051_thumb.jpg

34 gtt injectors $130 mint!!

Rb20 rb25 stock bov $40

R34 fuel pump mint $50

All done 85k

Also got a full set of immaculate coilpacks for 34 notsure what there worth ??

All will suit s2 stag, s1 will suit afm, fuel pump and bov

Edited by chef_stagea
FS.

R32 GTS-t Type M 4 Pot Front Brakes (280x30mm) - calipers, rotors, caliper hardline. - $150

JJR Coilpacks (RB20, S1 RB25, R32/33 RB26) - approx 18 months old - doesn't misfire or any of that rubbish. - $250

RB20DET Coilpack Loom - good condition, no misfires. - $100 $50

RB20DET Turbo + Exhaust Manifold - turbo good condition, I never had a boost controller so was running on stock boost. - $150 $100

RB20DET ECCS Inlet Manifold - complete with injectors, fuel rail, throttle body etc. - $150

PM/SMS. 0438858813.

1998 Nissan Skyline R34 GT-t

RB25DET Neo Manual

White

99,000k’s, 100k service is due, I can include a 100k service kit from Kudos Motorsport.

Nismo Bodykit (Aftermarket fibreglass)

Lenso D1-R Rims, 18 x 9 Front, 18 x 10 Rear. Tyres are in good condition, very roadworthy. Front left rim has some very minor rash. Fitted to the car way before they became popular.

Cam covers painted crinkle red, Valley cover painted black (high temp paint)

Factory Strut Brace

Rear guards rolled

C-West style eyelids

6000k HIDs

Clear front indicators, will come with clear side indicators (not fitted)

JJR Cooling Pro FMIC

HKS Pod Filter – secured with a steel bracket

JJR Coilpacks

Turbosmart Bleed Valve (10 psi)

Apexi Power FC with Hand Controller – tuned by Shaun @ Boostworx

ISC N1 Coilovers (Height and Damper Adjustable)

ISC Rear Camber Arms (not fitted, will come with car)

Plastic airbox from an SAU group buy

Extreme Heavy Duty steel-backed clutch, no slip.

D1 Spec Oil Catch Can

Split dump pipe

Pacemaker 3” front pipe

3” Unknown cat back, JASMA approved

Pioneer head unit

Standard front speakers, Soundstream 6” rear speakers.

Dash lights have white bulbs, but appear blue.

Nismo seat covers, +5 rwkw

Car made 198.1 rwkw on 12psi, boost turned down recently due to coilpack issues (have been replaced with new aftermarket items). Made just over 180 rwkw after Boostworx tune.

I have owned the car for just over 2 years, selling as I need a work car. I don’t really want to part with it, as it has served me well, but using it for work for 3 months is unrealistic.

Price: $22,500 ono. Can remove parts to lower price, but I don’t wanna muck around too much.

http://www.skylinesaustralia.com/forums/Sa...Gt-t280838.html

Trades: I’m on the lookout for a cheap track car (complete, not rolling shell), preferably 1J / RB S13. Unregisterable is fine. Looking for 15k my way minimum.

http://www.skylinesaustralia.com/forums/19...de-t329917.html

1998 Nissan Skyline R34 GT-t

RB25DET Neo Manual

White

99,000k’s, 100k service is due, I can include a 100k service kit from Kudos Motorsport.

Nismo Bodykit (Aftermarket fibreglass)

Lenso D1-R Rims, 18 x 9 Front, 18 x 10 Rear. Tyres are in good condition, very roadworthy. Front left rim has some very minor rash. Fitted to the car way before they became popular.

Cam covers painted crinkle red, Valley cover painted black (high temp paint)

Factory Strut Brace

Rear guards rolled

C-West style eyelids

6000k HIDs

Clear front indicators, will come with clear side indicators (not fitted)

JJR Cooling Pro FMIC

HKS Pod Filter – secured with a steel bracket

JJR Coilpacks

Turbosmart Bleed Valve (10 psi)

Apexi Power FC with Hand Controller – tuned by Shaun @ Boostworx

ISC N1 Coilovers (Height and Damper Adjustable)

ISC Rear Camber Arms (not fitted, will come with car)

Plastic airbox from an SAU group buy

Extreme Heavy Duty steel-backed clutch, no slip.

D1 Spec Oil Catch Can

Split dump pipe

Pacemaker 3” front pipe

3” Unknown cat back, JASMA approved

Pioneer head unit

Standard front speakers, Soundstream 6” rear speakers.

Dash lights have white bulbs, but appear blue.

Nismo seat covers, +5 rwkw

Car made 198.1 rwkw on 12psi, boost turned down recently due to coilpack issues (have been replaced with new aftermarket items). Made just over 180 rwkw after Boostworx tune.

I have owned the car for just over 2 years, selling as I need a work car. I don’t really want to part with it, as it has served me well, but using it for work for 3 months is unrealistic.

Price: $22,500 ono. Can remove parts to lower price, but I don’t wanna muck around too much.

http://www.skylinesaustralia.com/forums/Sa...Gt-t280838.html

Trades: I’m on the lookout for a cheap track car (complete, not rolling shell), preferably 1J / RB S13. Unregisterable is fine. Looking for 15k my way minimum.

http://www.skylinesaustralia.com/forums/19...de-t329917.html

good luck with sale, hard time to sell a line, wish you all the best

FS

Tein HR struts - Legal street spec non-adjustable coil overs - $500 neg - Suit R32 GTR/R32 GTS-4

Stock RB26 AFM's - Good for getting thru regency or spares for non modified cars - $300 for the pair neg

Stock RB26 turbo housings - Both turbos have intact ceramic turbine wheels however one of them has a rather nasty oil leak from the bearing - really only good for rebuild - $200 for the pair neg

HICAS Computer - spare that is no longer needed - $200 neg

Worn Toyo T1R Proxes 225's to suit stock gtr rim - not bald but mucho camber wear - give away

-D

R34 GTT PARTS....all from a 4 door PEAR WHITE

brakes front and rear comes with what ever you need handbrake cable near new pads, etc $600

diff ....$80

auto box 80 000kms... $150

dash (crash pad)..... $50

indercator stalk $35

window wiper stalk $35

auto cluster 80 000kms ... $80

air bag steering wheel and dash air bag ... $280

tail lights pair $100

side mount intercooler.. $100

stock exhaust front pipe back ....$100

glovebox $20

boot lid ok condition... $50

complete steering coloum with ignition barrel (no key) $80

rear bumper.... $50

seats front and rear... $250 a little dirty

left hand rear door complete with glass.. $80

drivers side and two back door trims with eletric controlls $40 each

parcel shelf $35

R34 GTT SHELL (DAMAGED) unrepairable bare shell not rolling nothing left on it DO WHAT YOU WANT WITH IT :thumbsup:

.....can be rego'd straight away without regency... have all papers $500 text me for vin and plate details if you want to do a check.

....0402 613 042....

post-70223-1279773434_thumb.jpg

post-70223-1279773466_thumb.jpg

post-70223-1279773486_thumb.jpg

post-70223-1279773500_thumb.jpg

post-70223-1279773518_thumb.jpg

post-70223-1279773581_thumb.jpg

post-70223-1279773595_thumb.jpg

post-70223-1279773611_thumb.jpg

post-70223-1279773647_thumb.jpg

post-70223-1279773664_thumb.jpg

post-70223-1279773678_thumb.jpg

Edited by michaeljohn23
R34 GTT PARTS....all from a 4 door PEAR WHITE

brakes front and rear comes with what ever you need handbrake cable near new pads, etc $600

....0402 613 042....

PM sent. Will SMS your mobile when I have a spare moment to call.

Ruby

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...