Jump to content
SAU Community

Recommended Posts

Hi all,

I have here a BRAND NEW still in original packaging GT-Spec FMIC Will fit R32, R33, R34 turbo models.

I am located in SA - Adelaide

Price: $335 (will take serious offers)

Postage?: Yes, at buyers expense or i can personally deliver within Adelaide metro areas for $15

Details of unit:

FMIC KIT INCLUDES:

Intercooler + Piping + Silicon Hose + T-Clamp

All Top Quality Products.

SIZE

Bar & Plate Intercooler

Core Size: 24"x12"X3"

Overall Size: 31"x12"x3"

3" Thick Core, 3" Inlet & Outlet

Please send send me a PM me and ill get back to you asap.

Regards,

Lee

post-22350-0-46926600-1293433030_thumb.jpg

Edited by shorty_01

hi i have a 3 1/2 inch titianiam cat back exhaust. passed regency with this so its nice and quiet but gives great note when on boost. i pushed 200rwkw on 10psi through this zorst with suporting mods.

think its originally a gtr zorst but i had it on my r32. light as hell except the jazma muffler. take that off and you can eazily hold it on a couple of fingersalso sounds tough as hell with it off as center muffler gives an awesome rb burble. was gunna use it on my drift car but now goin with diff idea.

looking for $375

cusco adjustable strut brace. came off a 31 i had. $140

set of falken 20 inch rims. good condition no tires $600

if pics wanted pm me or ring 0434223083.

cheers

For Sale

Skyline R33 series 2 1996

list of mods

18"VR5 mags

slotted rotors with blue painted calipers

cusco front strut bar

gtr rear strut bar

non hicas rear cradle

turbotech boost controller

turbosmart plumb back BOV

HKS front mount intercooler

Garret TB3401 big low mount turbo

3" stainless exhaust from turbo back

oil catch can

fuel pressure regulator

mines ECU fuel,boost and speed cut

short throw short shifter

extreme heavy duty clutch

greddy turbo timer

ISC coilovers 2000kms old

body kit

Boost gauge on pillar

oil and water temp and volt gauge in dash

sony stereo with 6x9 explode rear parcel shelf. 6" explode doors and kenwood 12"sub in boot on custom backing

alarm

Very rare factory wood grain dash and gear surround. wooden handbrake lever and gear stick knob. I have never seen this anywhere else

Ive had the car for 5 yrs and serviced every 5000kms

Last time car was on the dyno it was pulling 260rwkw with a stuffed CAS. It would do more than that now.

Its been a great car Im just moving on to better things

Bad points

I think there is a head gasket problem. The radiator overheated once I thought it might of been from the head gasket. I put a bottle of copper liquid in it and it stopped (car still boosts fine but it may need to be looked at in future) and the gearbox has a slight crunch between 1st and 2nd

Im looking at $10000 as is or $12000 with another motor and gearbox as a spare in exellent condition ready to be swapped.

Also has a taller ratio diff gets higher speeds.

If you would like to know more you can PM me or 0427999093

http://i533.photobucket.com/albums/ee334/r...ds/P1050569.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050580.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050577.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050579.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050573.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050572.jpg

http://i533.photobucket.com/albums/ee334/r...ds/P1050575.jpg

SOLD

FS: Turbo from R34 neo motor, MINT condition with low kms. Has writing still visable on the turbine wheel! comes with lines, hoses everything. $550ono

Pics on request.

Also forsale: 264deg Tighe Regrind cams to suit RB25. Drop straight in. brand new. $500

Contact via PM or sms 0412 938 933 located Para Hills.

Hi can u send Me ur cat back exhaust picture ta.

hi i have a 3 1/2 inch titianiam cat back exhaust. passed regency with this so its nice and quiet but gives great note when on boost. i pushed 200rwkw on 10psi through this zorst with suporting mods.

think its originally a gtr zorst but i had it on my r32. light as hell except the jazma muffler. take that off and you can eazily hold it on a couple of fingersalso sounds tough as hell with it off as center muffler gives an awesome rb burble. was gunna use it on my drift car but now goin with diff idea.

looking for $375

cusco adjustable strut brace. came off a 31 i had. $140

set of falken 20 inch rims. good condition no tires $600

if pics wanted pm me or ring 0434223083.

cheers

FS: Turbo from R34 neo motor, MINT condition with low kms. Has writing still visable on the turbine wheel! comes with lines, hoses everything. $550ono

Pics on request.

Also forsale: 264deg Tighe Regrind cams to suit RB25. Drop straight in. brand new. $500

Contact via PM or sms 0412 938 933 located Para Hills.

since i cant edit here are pics.

p1000895m.th.jpg

p1000894.th.jpg

p1000893u.th.jpg

p1000890l.th.jpg

For Sale:

R32 Adjustable castor rods, not sure on brand, they are chromoly and the rose joints are in perfect nic - $80

R32 Origin Rear bar and side skirts, converted back to type m kit so have no need for these - $250 for both

GFB Boost Tee - $50

R32 Front shocks and springs, shockers are Potenza Street Dampers with what appear to be stock springs - $50

Located in Adelaide Hills.

PM or msg/call 0407 633 573

1994 RB26 long motor with a spun bearing, minus rocker covers and coil packs.

Driven less than 5km from where it first started knocking.

Need it out the garage $1000ono

http://i55.tinypic.com/200proh.jpg

http://i53.tinypic.com/309rcsp.jpg

0433943034

NEAR NEW STRAIGHT FROM JAPAN...NEVER BEEN USED IN AUSTRALIA!!! EXCELLENT CONDITION!

TEIN CONTROL MASTER TYPE FLEX + EDFC TO SUIT R32 GT-R OR GTS4

These electric damper adjustable coilovers allows you to control your ride while driving (: Rare and hard to get, only available on special order worth over $4000 from a local wholeseller!!!!

Details:

16 level damper adjustment

full length and height adjustment

height and spring preload adjustment

pillow ball upper mounts

++++++++++++++++++++++++++

EDFC in cabin controller (allows you to control front and rear damper settings simultaneously from the drivers seat)

4 EDFC coilover motors + wiring included\

Perfect for road or track!

$1200 for EVERYTHING one of the top of Tein Coilovers including Edfc worth 600 alone!

Pm me for contact or enquires (:

post-43034-0-08639300-1293536513_thumb.jpg

post-43034-0-35959500-1293536529_thumb.jpg

post-43034-0-32161100-1293536542_thumb.jpg

post-43034-0-60625500-1293536557_thumb.jpg

got 2 pairs of 18" tyres with good tread i need to get rid of, was keeping them to use on my car but ended up selling the wheels.

First is a pair of 245/45/18 Zeetex with around 70% tread remaining. After $200 for the pair.

Second in a pair of 275/35/18 Nexen with around 50-60% tread remaining. After $200 for the pair.

post-23851-0-69431800-1293538911_thumb.jpg

post-23851-0-96406100-1293538953_thumb.jpg

post-48089-0-28767300-1293585207_thumb.jpg4x bluebird trx rims maybe 5 if can be found great cond $150

rb25det forward facing plenum is a standard one and has had throttle body moved to front real nice job $150 ono

Ofna Hobao nitro rc monster truck with a huge 5hp nosram 28 engine in it lifts front wheels up $250 motor alone cost $300

all so i will have a few sets of 17 inch tyres for sale more details to come

post-48089-0-90750000-1293583753_thumb.jpgpost-48089-0-50755600-1293585033_thumb.jpg

post-48089-0-46005000-1293585045_thumb.jpgpost-48089-0-23947300-1293585187_thumb.jpg

post-48089-0-07826200-1293585196_thumb.jpgpost-48089-0-28767300-1293585207_thumb.jpg

0433333612

1. 2 continental contisport 245 40 17 2-3mm $80

2. 2 bridgestone potenza re001 225 45 17 1mm $30

3. 2 neutons 235 40 18 1mm and bar $30

4. 2 dunlop semis 225 45 17 good for lala $50

nissan r33 gtr grill good cond that is a sticker in pic $100

1.post-48089-0-25423300-1293590468_thumb.jpg

2.post-48089-0-92373600-1293590440_thumb.jpg

3.post-48089-0-97293000-1293590457_thumb.jpg

4.post-48089-0-02572200-1293590481_thumb.jpg

and grill

post-48089-0-83531400-1293590489_thumb.jpg

sorry thought i would be able to edit old post

WORK VSKF WBM...Chromies....5x114.3

18x8 +38 235/40/18 Sumitomo Z2

18x9 +33 235/40/18 Nexen (need to fine out the model of tyre)

Tyres have plenty of tread on em

Some gutter rash, still look tha goods though

Sat nice on my 200sx and my BF XR6

$1900 with tyres

WORK EMOTION CR KAI..Gunmetal colour.....5x114.3

17x9 +17 235/45/17 Nexens

18x9.5 +12 235/40/18 Neutons, LOW TREAD ON EM

Some rash on the rims

$1700 with tyres

PICS ARE HERE :)

Edited by XQZIT

5 Stud 18 Inch rims for sale was fitted on a R32 Skyline Has slight gutter rash on all there is only one bad rash which i have posted a pic of the rest are very very tiny, Contact me if you have any enquires thanks. $500

post-77521-0-01347200-1293689133_thumb.jpgpost-77521-0-42802600-1293689152_thumb.jpgpost-77521-0-18284900-1293689182_thumb.jpg

post-77521-0-50794200-1293689244_thumb.jpg

This one they said needed to be fixed aparently leaks on side but im sure you'd be able to grind it back and it work or you could go get it fixed for $100 or so at a proper place. The rest of that black stuff is just from a tyre you can peel that off

Edited by Resigned R32

I have for sale 3 Drift gauges I bought about 2 months ago (still have receipt) and are still under warranty.

1 x Boost

1 x Oil Pressure (new in box not installed)

1 x Volt

All cups are unused.

They are amber / Red electronic gauges and come with all wires and looms everything that came in the box (boxes included with instructions).

Reason for selling want to but the stock nismo cluster back in.

$300 Firm

Paid $450 for all 3, 2 months ago.

Let me know if you have any questions.

2f03w2d.jpg

In the image shows oil temp as i swapped it over for the oil pressure just never got around to installing it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...