Jump to content
SAU Community

Recommended Posts

Kakimoto 3" catback, excellent condition from a 33. sounds tough, large rear muffler. (dont have pics yet) $350ono

also have a few bits left over from a silver 33 s2 if u need anything pm me.

pm sent this morning

R33 Sedan (4 door) side skirts and rear pods. these are genuine Nissan parts; not fibreglass junk copies.

Side skirts are in primer, will probably just need a light sand, then ready for paint. Rear pods are painted, so will require sanding back, primer then respray.

Will fit both Series 1 and 2 sedans.

Pretty rare items, asking $230 for the lot. (wreckers ask $260 and upward just for the skirts alone)

can send pics on request - contact via PM.

still for sale

1.

AWD Controller

"Extreme Torque Split Contoller"

simple 4 wire installtion, brand new, with instructions

as sold on ebay for $200

will sell for $110 posted express post australia wide

sold pending payment

TYRES

ALL PRICES ARE AS PAIRS

14"

4x 185/65 - Supercat - 60% tread - $60

15"

2x 185/55 - Hancook Optimo (one is flatspotted a little) - 60% tread - $40

16"

4x 205/55 - Mismatched pair - 60% tread - $60

2x 205/50 - Mismatched pair - 60% tread - $60

2x 225/50 - Sumitomo/BJ (mismatched pair) - 50-60% tread - $50

17"

2x 205/50 - Mismatched pair - 60% tread - $60

2x 205/50 - Mismatched pair - 70-80% tread - $80

2x 215/40 - Fulda - 50-60% tread - $60

2x 215/40 - Mismatched pair - 60% tread - $60

2x 215/45 - Pirelli PZero - 40-50% tread - $50

2x 215/45 - Bridgestone Potenza RE050A - 60% tread - $70

2x 225/45 - Michelin Pilot Preceda - 50-60% tread - $60

2x 225/45 - Michelin Pilot Preceda - 40-50% tread - $50

2x 225/45 - Mismatched pair - 70-80% tread - $80

2x 235/45 - Mismatched pair - 60% tread - $60

2x 235/45 - Bob Jane - 60% tread - $70

2x 235/45 - Mismatched pair - 80-90% tread - $100

Wheels

RAYS ENGINEERING - VOLK RACING - Challenge Zero

17x8" +32 and 17x9" +35 // 255/40 and 235/45 tyres, 70-90% tread

- $1450

PARTS

UNIVERSAL

TRUST GREDDY gear knob: $50

Dished Steering wheels (350mm) - $70

Nissan Boss Kit - $30

R32/R33 3" Bell-mouth Dump/Front pipe - $170

R33:

Wrecking Whole R33, tell me what you're after (no gearbox or ECU)

RB25 Engine, has everything minus ECU, turbo and injectors (can include some 550's for a little extra) - $1500

6x NISMO Sidefeed 555cc Injectors (RB25) - $500

Splitfire Coilpacks for RB25 S2 - $400

GTR style fibreglass front bar (rough condition, cracks etc): $50

R33 HKS SuperDragger Exhaust: $450

R33 APEXI Front Strut Brace: $100

R33 Rear Strut brace: $90

R33 Brakes, uprights and hubs (complete) - $900

R33 VLSD Diff with housing and half shafts: $220

R32 GTR

R32 GTR grill: $140

Brake Master Cylinder Stopper/Reinforcer (stops firewall flex) - $80 << SOLD PENDING PAYMENT

R32 GTS-T

WRECKING R32 HALF CUT MINUS ENGINE PARTS AND GEARBOX (ask in here what you're after)

S/S HICAS Lock Bar (extremely well built): $120 << SOLD PENDING PAYMENT

R32 GTR Style Bonnet with gts-t latch (GTS-t bonnet modified to look like GTR bonnet): $180

Stock R32 Parts

Suspension/Steering

2x Front Sway Bar - $40ea

2x Front Complete upper control arm assembly's including bracket and king pin bearing - $100ea -- PICS PICS

2x Front Camber Arms - $40ea -- PICS

2x Front Passenger side Lower Control Arm - $60 -- PICS

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Hub Uprights - $100ea -- PICS PICS

2x Rear Complete Uprights - $70ea

1x Rear Subframe - $100

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

1x Rear Toe Rod (hicas) - $50ea

Misc:

6x RB20 Injectors (standard) - $100set

1x RB20 AFM - $100

2x Doors, 2door (coupe), silver - $100ea

2x Clear Front Indicators - $60ea

2x Drive-shafts - $50ea

1x Horn, can be hooked up to any car - $20 -- PICS

2x Stock Clutches, 1 half warn, one fair bit more warn - $30 and $70

1x Stock Rear Spoiler (with brake light) - $50 -- PICS

3x RB20 Coilpacks - $30ea

1x Turbo Timer, very basic timer, manual set - $20

1x RB20 Fuel Pump - $40 -- PICS

1x Igniter Module (breaks down under a lot of heat) - $30 -- PICS

located near mitcham in SA

hey all,

selling my yokomo RC drift car, i just dont use it anymore..

had it for about 1.5 years but for 1 year of that it has been just sitting..

comes with:

yokomo top secret s15 package.

you get everything that comes with the pack when you buy it new (even box)

extras:

1 set of wheels with grip tyres

1 set of DISH wantanabe with drit tyres (new never used)

1 extra controller with reciever

1 bigger motor and control box with reciever

upgraded shocks (fitted to the car) stock comes with car

spare chassis with bits and pieces (almost complete, but in pieces)

tools

spare s15 chassis

spare ae86

spare r34 gtr (never used, no hose cut yet for posts)

3 batteries (big 3800, 1800, 1700?)

2x chargers

here are pics:

post-16535-0-94357800-1306455157_thumb.jpg

post-16535-0-89290700-1306455188_thumb.jpg

post-16535-0-69526800-1306455227_thumb.jpg

after $500 FIRM, this is easily a 1-1.2k package.

pm me or 0433 290 801

cheers

r32 gtr fibreglass wing (maroon) perfect condish - $50

r32 gtst bonnet and latch (bonnet is in primer ready for paint) perfect condish - $150

just listed few bits on ebay... all at 99c and bidding!!

intercooler kit (suit skyline stagea) - bid away -http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=180682650069&ssPageName=STRK:MESELX:IT#ht_500wt_1156

HKS 25/35 full kit - http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=180682640485&ssPageName=STRK:MESELX:IT#ht_500wt_1156

r34 gtt / s2 stagea injectors - http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=180682629578&ssPageName=STRK:MESELX:IT#ht_500wt_1156

sick of staring at this stuff, its taking up room in the shed. give me an offer if you want something

rear strut brace to suit r34 2 door or r33 2 door. $70, brand new, same price as JustJap, same item, pick up for free from me, dont pay for shipping from JJ.

4x r34 gtt rims, bit scratched, tyres finished. $350, comes with centre caps

4x s14 standard rims, 3 with 90+% tyres, 1 with tyre just above markers. $300

2x r33 front rotors, freshly machined. $50

r32gtr intercooler, bit of a ding in the bottom, nothing to affect performance. $60

s14 standard front rotors and calipers. perfect upgrade for s13. $150

s14 back seat, pretty good condition. $50

Cooler sold pending payment.

for sale brand new 17'' x7 multi 4 stud BSA TE37 works copys "vork ravs" +40 et decent dish perfect for 180, silvia, gemini , r31, any 4 stud pattern. 3 still in boxses 1 with tire on it for fitment check ect never used, looking for $650 ono same rims go for 850+ on ebay and these are the BSA ones not the cheap chinese copy copys lol, pm me if interested ,no longer needed so need em gone.

cheers Jase

post-76904-0-06893000-1308311057_thumb.jpg

post-76904-0-47352500-1308311219_thumb.jpg

for sale brand new 17'' x7 multi 4 stud BSA TE37 works copys "vork ravs" +40 et decent dish perfect for 180, silvia, gemini , r31, any 4 stud pattern. 3 still in boxses 1 with tire on it for fitment check ect never used, looking for $650 ono same rims go for 850+ on ebay and these are the BSA ones not the cheap chinese copy copys lol, pm me if interested ,no longer needed so need em gone.

cheers Jase

post-76904-0-06893000-1308311057_thumb.jpg

post-76904-0-47352500-1308311219_thumb.jpg

where do you think they are made....

where do you think they are made....

still from china but by BSA so they are quailty assured and adr approved unlike the cheap no name brand copys now which are prob made from the same die but inferior metals ect that was my point

cheers jase :thumbsup:

ps that 180 kit still up for grabs

RB25det sump $40

R33 sr2 wing needs paint $40

GTR wing no end caps needs painting $200

R33 Air Conditioning Condenser gtst 1994 $40

R33 gtst sr1 front wiper motor $30

R33 gtst sr1 rear wiper motor $35

R33 gtst sr1 climate control $40

R33 gtst fuse box and cover $20

R33 gtst sr1 brake booster and master cylinder $65

R33 gtst sr1 bonnet hinge set $15

R33 gtst overflow and washer bottle $25 for both

R33 GTST MANUAL ACCELERATOR/BRAKE/CLUTCH PEDAL SET $70

R33 gtst battery tray need painting $15

R33 manual gear shift boot/plate $20

R33 gts-t rb25det Genuine manual radiator in good working condition $45

RB25 R33 GTST SR1 CAS CAM ANGLE SENSOR AND BRACKET $55

R33 clutch master cylinder $30

R33 RB25 skyline power steering reservoir with lines $20

pm me or 0435888239

Dave

Wolf 3dv4 EMS with a v4 hand controller and the D.I.Y installation manual Works perfect no longer needed as i have sold the car it was in will work in any fuel injected car all u have to do is re-wire it with the wire diagram provided. will post anywhere in AUS free Txt adam 0411 295 483 post-85857-0-58366000-1308476953_thumb.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...