Jump to content
SAU Community

Recommended Posts

Hey guys,

I have a few bits for sale as i am selling my car. Prices are firm but if you think they are unreasonable please let me know and i will see what i can do :thumbsup:

Pleasw SMS me for pics as my internet is having trouble uploading ATM. 0430 919 103

Turbo Smart boost controller $120 - comes with main unit, in cab switch for high and low boost setting, hoses and fuse. NEW PRICE = $100

GTR badge $30 - badge is to fit is R33 grill. it was attached to my car when i purchased it but, i took it off as it's a GTST. NEW PRICE = $25

"A" pillar Plastic boost gauge moulded mount $30 - fits standard boost gauge, and is to fit a R33 "A" Pillar. NEW PRICE = $25

2 x 5mm slide on wheel spacers $15 (pair) - These are universal wheel spacers. SOLD!!!!!!

Chrome boost gauge mount $15 - fits standard size gauge.

Red/Chrome racing pedals $15 - universal fit, includes clutch, brake and accelerator

Please PM or best to just SMS me 0430 919 103.

I am located at Moana but, I am a delivery driver for an exercise company so i may be able to drop it out to you :)

cheers Jamie

RB25 series 1 turbo $250 FIRM (came off motor which had 110,000kms) ***sold pending pick up tomoz**

R33 series 1 stock rims with 90% Toyo tyres 225/??16 $400 (all rims have minor gutter rash i think)

R33 series 1 grill in white $35

Blown T25 turbo $5

Dan 0402541975

turbo back up for sale $250 firm

17 x 9 Enkei 5 spoke wheels - including 6 255/40R17 tyres (4 on the wheels). 2 x tyres Maxxis @ 20% worn, 2 x Bridgestone runflats at 40% worn, 2 x Maxxis @ 80% worn (tyres not on rims).

$800ono

One rim has a hairline crack on the inside of the rim on the very outer edge of the lip - been quoted $200 to fix.

post-3189-0-70343800-1325748593_thumb.jpgpost-3189-0-37961000-1325748619_thumb.jpg

Work Wheel nuts x 16 brand new. Will throw in 4 x lock nuts WITHOUT key for free. Locknuts have had some extra lovin' with an extra FBH and socket....but that's another story. $100 plus post.

post-3189-0-27783500-1325749052_thumb.jpg

Swirl Pot / External Fuel Pump setup. Some fittings still attached - previously housed a single 044 and was fitted to R32 GTR. Get your beast prep'd for the SAU track day and eliminate fuel surge! Fitting available. $250

post-3189-0-78530400-1325749530_thumb.jpg

Previous setup:

post-3189-0-08960200-1325749791_thumb.jpg

That's all folks (for now)

17x8 stitch evolution two piece wheels, 5x114.3 +8 offset all round

front tyres 60%, rears gone, some rash on two wheels otherwise good cond.

-$600 ono.

th_DSC02126.jpg

r33 GTS/GTST/GTR rear pods, Top Secret style -$80

th_pods.jpg

r33 weather shields for coupe, no visible cracks, good condition - $50

th_shields.jpg

PM or sms/call on 0422 314 938 :thumbsup:

Edited by SkyHi_33

2GB iPod Shuffle brand new sealed in box - $40

Karbonetics carbon fibre engine covers with an R34 GTR ornament plate to suit RB26DETT - $180! (The ornament plate cost $130 alone :wacko: )

$200 for both the ipod AND carbon fibre goodies if someone grabs it tonight! Let me know - 0433743661

WORKSHOP GRADE AIR COMPRESSOR!!

Pilot Air K30 Air compressor...

- 5.5kw 3 Phase electric motor

- Kill switch/ Isolator box

- 681L/min air supply

- 100ish L air tank

Perfect for workshop or the serious home shed (if access to 3 phase)

$1500 (over $4000 new)

Call or txt Brad 0408878086 or Pm me here.. I can mms photos or you can come round for a look...

Cheers

Hks pod never used still in box $50

Jap brand titanium 3 inch rear straight through muffler clamp on $50

R33 rear seats mint condition $50

R33 centre console $20

Stock rb25 dump/front pipe $20

Stock r33 Gtst front camber arms $20

Ono

0417084638

17x8 stitch evolution two piece wheels, 5x114.3 +8 offset all round

front tyres 60%, rears gone, some rash on two wheels otherwise good cond.

-$600 ono.

th_DSC02126.jpg

r33 GTS/GTST/GTR rear pods, Top Secret style -$80

th_pods.jpg

r33 weather shields for coupe, no visible cracks, good condition - $50

th_shields.jpg

PM or sms/call on 0422 314 938 :thumbsup:

pods and wheels still available, cmon guys the wheels are genuine 2 piece jap wheels with wicked offset!! need to clear the room in garage quick

offers...

http://www.skylinesaustralia.com/forums/topic/386979-r32-shell-defi-catch-can-vskf-more/page__p__6171814__fromsearch__1#entry6171814

r32 N1 gtr front bar with lip - $550

r32 gtr front guards - $400

r32 gtr front indicators - $150

carbon vented bonnet - $500

brand new BC coilovers - $1000

r34 gtt front brakes with slotted rotors and a1rm pads - $600

early r32 brick headlights - $200

vanquish roof spoiler - $150

s13 origin boot lip - $150

1993 r32 shell, sunroof, no running gear, front end or seats, walk in rego - $1000

ase oil cooler core, relocator, lines, fittings - $400

surgetank, 044, lines, fittings, gtr pump - $400

Hey guys,

I have a few bits for sale as i am selling my car. Prices are firm but if you think they are unreasonable please let me know and i will see what i can do :thumbsup:

Pleasw SMS me for pics as my internet is having trouble uploading ATM. 0430 919 103

Turbo Smart boost controller $120 - comes with main unit, in cab switch for high and low boost setting, hoses and fuse. NEW PRICE = $70

GTR badge $30 - badge is to fit is R33 grill. it was attached to my car when i purchased it but, i took it off as it's a GTST. NEW PRICE = $20

"A" pillar Plastic boost gauge moulded mount $30 - fits standard boost gauge, and is to fit a R33 "A" Pillar. NEW PRICE = $20

2 x 5mm slide on wheel spacers $15 (pair) - These are universal wheel spacers. SOLD!!!!!!

Chrome boost gauge mount $15 - fits standard size gauge. New Price = $10

Red/Chrome racing pedals $15 - universal fit, includes clutch, brake and accelerator $15

White R33 Skyline GTS-t 193000kms $8500!!!!

Please PM or best to just SMS me 0430 919 103.

I am located at Moana but, I am a delivery driver for an exercise company so i may be able to drop it out to you :)

cheers Jamie

Hey guys,

1995 Nissan R33 Skyline GTS-t (TURBO)

PRICE DROPPED DUE TO URGENT SALE! as I'm going on a holiday.

$8500 I am open to offers!!!!!

(I will not be conducting any sales over "paypal" do to the latest scams)

This car has been my daily for the past 2 and a half years. the engine has done 193000kms however the cluster shows 153000 as i replaced it due to a faulty RPM gauge thingy. the oil and filter has been changed every 3 months, fuel filter changed every 6 months and coolant every 6 months.

I have paper work for Auto Electrician Work, Replacement of the 2 front radius rod bushes paper work, New shocks paper work, clutch and fly wheel work. I also have the paperwork to show the car has successfully cleared Regency and the original paper work from when i bought the car from a car yard.

the car is fitted with...

17" mags

Front bar and side skirts

Apexi front strut brace

Saber front mount intercooler

Stock exhaust with muffler is attached currently but will come with a 4" catback exhaust

King springs at legal ride height

Pod filter

CD Player / front pioneer splits/ Alpine Type S 6" in the rear/ Clarion Sub in boot.

Space saver wheel (never used)

Boost gauge

Spare parts...

stock side mount intercooler (with piping)

stock panel filter (with filter)

4" exhaust

(these parts will come with the car and be included in the price)

The car is in good condition. I have never had any engine problems, the car drives smooth, the interior is clean and no smoking has been done in the car, the exterior in good condition apart from a small dent on the front right hand fender where some idiot in a shopping centre car park hit me while i was in the shop and left. this has been touched up with touch up paint and is the only damage on the car which is very minimal.

$8500 or make me an offer!!!!

(sorry no swaps)

see full ad at: http://adelaide.gumtree.com.au/c-Cars-Vehicles-Motorbikes-Parts-cars-Nissan-Skyline-R33-GTS-T-TURBO-8500-W0QQAdIdZ341804341

Please call or SMS me on 0430 919 103

cheers Jamie

180sx 1992 roller very very good condition full sa rego never defected 100% complete just minus engine gear box and front seats, around 125xxxkms just slap in running gear and away you go 1 very neat 180 or very good project car been garaged for last 7 years only selling due to to many projects now that i am building stag engine too. $3000 ono can text pics

Cheers Jase

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...