Jump to content
SAU Community

Recommended Posts

few things im pretty keen on getting rid of

33 gts-t front rotors, had them machined but went a different route for brakes

$80

th_DSC_0192.jpg

32 gtr intercooler, doesnt leak, has been thoroughly cleaned inside. small dent on bottom of core, nothing too dramatic

$50 SOLD

th_DSC_0198.jpg

34 gtt rear strut brace, in as new condition

$70

th_DSC_0134.jpg

34 gtt standard rims, they are scratched and tyres are finished. just need a blast and coat. have the centre caps laying around somewhere if you want them too.

$300 set SOLD

th_SL370404.jpg

s14 standard rims, in great condition. 3 tyres are the same, great tread. 1 tyre different, average but still legal tread.

$300 set

s14 track project, http://nissansilvia.com/forums/index.php?app=classifieds&module=core&do=view_item&item_id=1876

$8100

all prices ono, make me an offer, i can only say no

i have a set of R34 neo Rb25det Yellow jacket coil packs for sale.. perfect condition and made 350 rwkw on my set up with zero misfires. about 1 year old.

$300 firm

hey mate pm'ed ya a few times these still.up for grabs

R34 Parts For Sale:

RB25det Neo Coil Packs - Perfect working order $80

Stock Cat - $50

Rubber Intake Pipe - $20

Stock Fuel Pump - Perfect working order $30

Front Seats (sedan) - Will sell as pair only $200ono pickup only

OP6 Turbo w/rb20 actuator (have the std actuator aswell),only ever run 12psi. (motor has done 110k)

Turbo is still on my car atm but will be removed next week.

$450

Generic Parts:

Slip on spacers 8 or 10mm $10

1 din triple gauge mount $10

HKS Turbo Timer $25

JVC KD-R316 Headunit basic cd/mp3 unit $30

Samsung Omnia Icon 2 I8000T Mobile with ac charger $80

Parts all located in Clearview (near Gepps Cross Int).

Make an offer on this stuff i just want it gone.

Contact:

PM on here

or

0432 838 323

Daniel

My daily is up For Sale.

Daihatsu Charade G202 CE.

3cyl 1000cc

Has Kenwood 4 speaker stereo with splits up the front,

Brand new water pump.

Air Conditioning woks well on the hot days.

Costs me about $10-15 a week on fuel.

Has only done 120,000kms. Those little engines can go upto 300,000

Its green in colour with nice blue seats.

Interior is fairly clean but the outside could do with a tidy up. Most panels are scratched o a little dented. Still looks good from a distance.

Mechanically its in great condition.

So if any one is looking to keep there k's down on the skyline then this is for you.

I'm looking at $1500 for a quick sale.

Brad 0427999093

No photos sorry its not worthy of a photo shoot

R33 GTR series 3 front Brembos for sale

brembos were painted in red, new seals, new stickers, new DBA 400 slotted rotors 324mm and new QFM A1RM pads all done 5000kms ago

like new

$1200

Josh

0411742212

pulling off the car this week, get in quick

uSEeP.jpg

stuff for sale

cheap r32 gtst $4500 http://www.gumtree.com.au/m-my-ad.html?adId=1000152426

gt3540 turbo with ported 1.06 rear garret housing as new condition, t3 flange 350kw+ $550

rb25 turbo unknown condition $100

r33 gtst stock air box $50

r32 gtr front calipers, pads, slotted rotors $250

r32 gtr passenger seat $120

r32 gtr rear seats & trims $200

set of 4* 18x8 wheels need tyres $400

0430606223 (prefer text)

HARDLY USED - AS NEW condition, smells brand spanking new! - was only a temporary pair until my Dainese gloves came that I ordered online. I paid $125 for these Alpinestars ones and the new gloves came soon after and these haven't been worn for ages so I'm putting them up for sale.

Size: MEDIUM

Price: $80 FIRM

Contact me on: 0433743661

GREAT FOR TRACK DAY PURPOSES!

Alpinestars SP-2 Gloves Black

Alpinestars SP-2 glove has been developed to give improved performance and protection, while retaining style and practicality

Features:

-Full-grain leather construction with synthetic suede palm with leather reinforcements for improved grip, comfort, protection, and reduced weight

-Carbon fiber knuckle protection, profiled for fit and impact dissipation

- Micro-injected finger knuckle protection with split layer construction for flex comfort

-Leather reinforced thumb and EVA padded wrist protection

- Rubber pad inserts to protect palm from abrasion

-Extended wrist protection

- Velcro cuff wrist closure with TPR logo on upper wrist

- TPR (thermoplastic rubber) logos and details with printed palm logo to improve comfort

421777_260328864053388_100002288304845_565360_1112457032_n.jpg

R34 Parts For Sale:

RB25det Neo Coil Packs - Perfect working order $80

Stock Cat - $50

Rubber Intake Pipe - $20

Stock Fuel Pump - Perfect working order $30

Front Seats (sedan) - Will sell as pair only $200ono pickup only

OP6 Turbo w/std actuator only ever run 12psi. (motor has done 110k)

Turbo is still on my car atm but will be removed next week.

$420 firm

Generic Parts:

Slip on spacers 8 or 10mm $10

1 din triple gauge mount $10

HKS Turbo Timer $25

JVC KD-R316 Headunit basic cd/mp3 unit $30

Samsung Omnia Icon 2 I8000T Mobile with ac charger $80

Parts all located in Clearview (near Gepps Cross Int).

Make an offer on this stuff i just want it gone.

Contact:

PM on here

or

0432 838 323

Daniel

Updates to op6 turbo,rb20 actuator sold.

Item 1: RB20DET Crossover pipe from a Ceffy (No spot for a BOV)

Price: Make a reasonable offer

Item 2: (2 1/2ft tall) Mini Electric Guitar with mini amp and all cables.

Only played it about 4 times then put it away and never got back to it.

What you get

. 2 1/2ft Guitar

. 2 1/2ft Guitar carry bag

. Cable from Guitar to Amp

. Mini Amp

. Power cable for Amp

. Picks & Allen key for adjusting strings

Price: $100ono

Feel free to inspect items. Would like the guitar gone ASAP. PM me or txt anytime between 7am and 10pm on 0433 522 234

post-62269-0-08268100-1331722325_thumb.jpg

post-62269-0-88976600-1331722580_thumb.jpg

post-62269-0-47594100-1331722692_thumb.jpg

post-62269-0-54330400-1331723058_thumb.jpg

post-62269-0-36602300-1331723173_thumb.jpg

post-62269-0-53300300-1331723467_thumb.jpg

R32 Standard orange indicators, good condition $120 (Pair)

R32 Front headlights, no damage, and with all mounting brackets, good condtion $250 (Pair)

R32 GTR Grill, with all clips, good condition $150

R32 Sidemount Drivers side seat rail, suits fixed back seat $150

R32 GTR Passengers seat $200

R32 GTR Rear seat $100

Complete Rear Cefiro rear lights with centre 'CEFIRO' piece $350

R34 GT-T Nismo Coilovers, height and damper adjustable $1000

R34 GT-T KYB Buzz Spec non height adjustable, damper adjustable, Coilovers $600

R34 GT (NON Turbo) Lowered king springs on aftermarket shockers $200

R34 Passengers side mirror $80

R34 Auto Dash cluster $100

Fs Vp AERO Mok X Show car

BODY:

-GEN HDT bodykit includes all items as per the orig aero

-custom linamint green paint inside out (Torana xu1 colour)

-gloss black trimming,door handles and mirrors

-Genuine Aero boot mould

-GEN HDT badgeing and decals

TRANS:

Rebuilt v8 4spd with shift kit,Bigger bands clutches And servo,small stall (2,200) and large trans cooler

MOTOR:

Fresh EFI Holden 5.0l,Head work,new crane 276 cam,lifters,rods,all new gaskets,JP high volume oil pump,cleaned oil pick up and sump ,alloy polished brand new PWR rad,group a injectors and bosch pump

DIFF:

vl walky diff with 3.9 gears and Very tight predictive LSD

WHEELS: 19"vy gts wheels or stockies

STEREO:

pioneer cd player,pioneer 6x9's rear,

EXHAUST:

pacemaker extractors, 3" system Either dumped at diff Or with bolt on rear resonator for going to the shops

MISC:

20% window tint

Autometer guages x3 and 5" monsta tacho with shift light

Genuine HSV dash cluster

INTERIOR:

vs statesman grey leather seats

Hsv door trims

Genuine momo f1 concept steering wheel and boss

Custom embossed Aero floor mats

BRAKES:

VT Commodore big brake upgrade front and rear

New Master cyl and booster

SUSPENSION:

lowered with custom shocks and springs all round Sitting at a legal height

Entire car replaced with all new bush's,control arm,s,strut tops ect

Thought ill try my luck on here not ure average commodore 8k ono /swaps

post-77561-0-84381500-1331800536_thumb.jpg

Edited by Ke55pig

For Sale: HTC Desire HD. $280 o.n.o

3 months old, Always had screen protector, always had protective case. Comes pre-loaded with lots of paid games & apps. USB cables, charger,

manuals, comes with 2 cases and 10x Screen protectors.

Selling as Optus saw fit to upgrade my acount with a new phone

:)

Details:

Super smooth multi touch screen.

Android 2.3.5

8mp Camera

720P HD Video

1.5gb Internal Mem

GPS, WiFi

sms Sam 0421 460 040

Edited by awsam

2 X bridgestone 215/40/18 80% tread = $120

3 X bridgestone 225/40/18 30%-40% tread = $120

set of 4 X r32 gtst wheels & tyres good tread = $150

r33 gtst airbox = $50

r32 gtst front calipers, pads and rotors = $150

r32 gtst passenger seat = $20

r32 gtst rear seats & trims = $50

0430606223 (text&call)

Big exhaust with connector $50 o.n.o, not sure of actual size.. bout the same as a CD. Has a deep gurgle @ idle and sounds amazing when

driving. Never had any attention from the cops with it.

Selling as I replaced whole exhaust.

R33 S2 Cat, pretty good condition from looks. Bought it as replacement for mine but S2 cat is longer than S1 cat so did not fit.

Honeycomb looks almost perfect.

$50 o.n.o

sms Sam on 0421 460 040

HKS EVC-2 Boost controller

Comes with Controller/Head Unit, Wiring, Valve

$120

APEXi REV - SPEED Meter

Displays the following >> Engine RPM, Vehicle Speed, Travel Distance, 0-100m/200m/400m times with trap speed, 0-100km/h/200km/h/300km/h times, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning

$60

RB20/25DET Air Flow Meter

Green Sticker type,

$80

R34 OP6 Turbocharger

Removed from low km engine, ran on standard boost

$450

R34 RB25DET NEO Engine Cover

$80

R34 RB25DET NEO Wiring Loom, from Auto engine

$150

Work Euroline 18" x 8' offset 38, 5x114 pcd, tires have camber wear but still usable. - pair only

$250

Work Equip - 16 x 7 Size - 114.3 x 5 Stud - 33 offset - pair only

$100

S13 Silvia Rh tail light

$30

S13 Adjustable castor rods KTS

Missing collars were they mount to chassis, Should be easy to find second hand or have some custom made for around $50, Or use to replace bent Arms

$50

S13 TEIN Coil over struts Rear Pair only

$200

S13 Cooling fan with Viscus Hub

$30

S13 SR20 Fan Shroud

good used condition

$30

A31 Cefiro Center counsel with lid, Manual / Handbrake type, Up to shifter surround (no surround)

$120

Nissan Rear Sub frame Locking collars

Urethane Type, used condition

$25

Located In Tea Tree Gully area, all prices negotiable

Paul 0422444532

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...