Jump to content
SAU Community

Recommended Posts

I got a blitz turbo timer sitting there with the better part of the wiring harness...

4pk of JD's n coke - 0433830055

Also looking at swapping my bilstein coilovers suit R32 with softer spring rates.

I want base height adj stiffer coilies which would suit drift application better.

Clearing Out Few Parts....

RB25DET SERIES 2

SPITFIRE COILPACKS

$350

post-51589-0-00728700-1339845256_thumb.jpg

RB25DET SERIES 2

SUPER SPARK COILPACKS

$250

post-51589-0-72201700-1339845273_thumb.jpg

R32 M-Spec Turbo Brake Kit Includes

Front Disks And Callipers

Rear Brakes Are Complete with Knuckles

Hubs,disks, callipers And Cables

$400

TWO R32 SEADAN EXHAUSTS

LEFT ONE 3INCH WITH HKS MUFFLER

$150

RIGHT ONE FULL STAINLESS STEEL NO BRAND

3 INCH ALL THE WAY

$250

post-51589-0-11678400-1339845291_thumb.jpg

Pick Up In Mansfield Park 0431 391 262 Luke

Genuine bride brix ergo reclinable with bride rail. Mint seat, no rips, no stains and no fake shit. $600

R32 GTR passenger seat with rail $180

Will swap with cash on top for a decent set of s13 coilovers

Pm for photos

Bayden Smith

Fs cusco s13/180 strut brace 120.

R32 strut brace 80

R33 HKS superr drager cat back 800 regency approved

Rebuilt steel wheel Rb25 turbo gd for 20 psi 500

T25 rebuilt 200

... Bare ca block and head head has valves n shizz in it 100

Rb25 Pwr steer pump 80

Neo inlet manifold 150

S13/180 doors both straight with windows and mechanisim 150

R34 gtt front rotors calipers 500

R32 gtr door trims n rear quater windows 150

180 sx tail lights n garnish 150 set

BN hydro handbrake 150

180 vertex front bar 150

Audio

Dls a6 mono 1200wrms $800

soundstream 2.560 350

kicker 300wrms mono 150

euroline style wheels 18x8/9 700

manray vertex vr5s 17x9.5 700 pair

japanese piaa racing rims 17x8/9 800 (maybe 9.5 will look)

rb25 engine needs new headgasket 74 thou ks $800

r32 gtr front guards mind condition $400

R32 rear cradle complete with ally spacers n lock bar $300

R32 front crossmamber with power steer $150

6000k h1 hid kit. 100 bucks

3" AM Performance high flow cat. stainless steel. good condition. 190 bucks

r33 gtr wheel with airbag. 50 bucks.

r34 gtt airbox with filter and snorkle 20 bucks

0458005624 [email protected]

6000k h1 hid kit. 100 bucks

3" AM Performance high flow cat. stainless steel. good condition. 190 bucks

r33 gtr wheel with airbag. 50 bucks.

r34 gtt airbox with filter and snorkle 20 bucks

0458005624 [email protected]

I'll grab the airbox and snorkle off ya pm sent

Got a few bit sitting in the garage that I need gone.

R32 GTS-t drivers side front guard - dark blue. (Type with indicator.) $80

Pair of R32 GTS-t type m side skirts. (Need a bit of work) $50

R32 GTS-t/GTR rear bar - White. (One of the clips is broken but other than that, in good condition) $70

Shoot me a PM.

Still up for grabs :whistling:

Genuine bride brix ergo reclinable with bride rail. Mint seat, no rips, no stains and no fake shit. $600

R32 GTR passenger seat with rail $180

Will swap with cash on top for a decent set of s13

coilovers

Pm for photos

Bride seat and rail sold..

R32 GTR seat $150

Up for sale is my 2011/2012 model ZR pro pocket bike that hasnt even been fully run in, needs to go through one more tank of fuel before it can be put to its limits, only riden it a few times at quite low speeds in order to make the run in process successful, this is a well built pocket bike not a cheap dodgey one, even has its own build plate/ serial No, this bike cost me close to $500 and due to other commitments i have had hardly any time to ride it so its been sitting there for a good few months, comes with many spare parts such as a stand, upgraded pedals, tool kit, fuel mixer bottle and ill throw in a free bottle of two stroke oil and new clutch that needs to be put in after the run in period, im looking for around $260 ONO

Heres a lil more about the bike below:

Engine Description Two Stroke Air Cooled

Engine Size 49 cc

Engine Power 4.2 HP

Engine Ignition Magneto

Engine Cutoff Kill switch

Transmission Centrifugal

Max Speed 40+ mph (weight dependent)

Fuel Gas & 2-Stroke Oil @ 25:1

Fuel Capacity 2.5 Liter

Running Duration: 2-3 Hours

Max Load 240 Pounds

Wheel Type Racing Slick tubeless tires 6.5" rim

Brakes Front & Rear Disc Brakes

Demensions L 37 1/2" x W 19 3/4" x H 20 1/2"

Dry Weight 36 Pounds

Frame/body style Steel Tubed Frame

a0i1qu.jpg

For more info or photos contact me on 0402930153

Edited by SLY333

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...