Jump to content
SAU Community

Recommended Posts

FS

Piaa japananese racing rims (spokey) 17x9/8 4/5 x114..3 (ofset will put up soon theer ok) $600

post-77561-0-29041600-1341397342_thumb.jpg

Maray vertec vr5 18x9.5 +45 Pair 600

post-77561-0-98206700-1341397368_thumb.jpg

17x9 offset is killa full set decent dish(polished lip black centres could do with refurbishing) $1000

post-77561-0-42487700-1341397350_thumb.jpg

ono plz contact me

FS Car audio

DLS A6 mono amplfier 1200wrms $700 ono

Soundstream PCA 2.520 $300 ono

CDT audio splits brand new minus tweeter payed $600 fs 4 $300

Kicker 300wrms $150

soundstream 1000wrms sub $200

Up for sale is a set of Gmax Engima rims and tyres, i bought these wheels brand new from a company here in Adelaide, and it cost me a fortune for these stunning wheels, i have had them on my R33 skyline and they looked excellant with perfect clearance between the calipers and rims, the rims centres are a shadow grey with polished lips, i have cleaned these rims religiously once a week and no brake dust has been baked onto the rims, these wheels have never been buckled or had any dents etc, the tyres on there where quite expensive and still have nearly 100% tread on them, the wheels are approximatly 18x9 and will fit all 5 stud nissans, fords, toyotas, etc 5 x 114.3

Looking for around $1100 ONO

For more pictures or queries dont hesitate to call me on 0402930153

35alyyu.jpg

Edited by SLY333

Up for sale is a set of Gmax Engima rims and tyres, i bought these wheels brand new from a company here in Adelaide, and it cost me a fortune for these stunning wheels, i have had them on my R33 skyline and they looked excellant with perfect clearance between the calipers and rims, the rims centres are a shadow grey with polished lips, i have cleaned these rims religiously once a week and no brake dust has been baked onto the rims, these wheels have never been buckled or had any dents etc, the tyres on there where quite expensive and still have nearly 100% tread on them, the wheels are approximatly 18x9 and will fit all 5 stud nissans, fords, toyotas, etc 5 x 114.3

Looking for around $1100 ONO

For more pictures or queries dont hesitate to call me on 0402930153

35alyyu.jpg

Had these on my Gunmetal R32 GTST, Looked f*#kin amazing, realy wish I could afford these........awsome looking wheels.

For sale is my pride and joy: 1996 R33 Series 2 GTS-T Nissan Skyline (Silver, Manual) 154xxx KMS

I've owned it for the past 3 years and loved every minute of it, reason i'm selling is i need something more 'sensible'. Hubby and i both have imports which = too much $$$ lol

Its in pretty good condition, the exterior has a few paint chips , couple on the bonnet theres one probably less than a cm and a few on the inside of the drivers door but because it's silver the colour underneath isnt too far off so not too noticable.

Interior is almost immaculate, drivers seat has wear and tear on the side from getting in/out over the years (was like that when i bought it) but i have since always had seat covers on. Has all orignal Skyline mats front and back.

I've recently bought brand new black leather (with white stitching) gear stick and handbrake boots which match the pearl white dash perfectly :) have also recently replaced the steering wheel with one in near perfect condition.

Have recently fitted brand new brake pads all round, re-gased air con, and replaced heater core.

Fitted on the car:

18" wheels (will have to get back to you on the brand!)

Exhaust

Front mount

Pod filter

2 Thermo fans

Full Pioneer sound system: CD player MP3/AUX input, 6 pioneer speakers (tweeters, 3 way 6" in front doors and 6x9's on parcel shelf)

Also comes with stock wheels (with tyres) and spare.

Only issue is speedo is playing up, it stops working occasionally so i am currently sourcing a replacement.

Please contact me for more info (no time wasters, or swaps!) 0433 680 758

Cusco r33 bmc stopper $60

3" cat back stainless steel RSR system with AM Performance rear mufflers $500

Top secret style rear carbon fibre rear diffuser. To suit r33 but will fit pretty much anything. Few scratches underneath,nothing you can see unless your under the car. $500

reconditioned Ps pump, still in sealed packet. $200

Josh

0411742212

considering selling my 32, as i cbf anymore. Send me an offer via pm, might separate items but for now whole lot will be sold as a bundle.

32 gtst - defected shell. 5mm too low, can be easily removed with suspension listed below.

Comes with -

RB31DET. Specs are around here, built motor with low kms for its age.

rb25det gearbox

OS Giken twin plate clutch

single piece tailshaft

Nismo GT Pro 2 way adjustable diff

Also have -

32GTR bonnet - gunmetal grey in perfect nic.

32GTR copy front bar made to fit gtst.

3x Rb20det gearboxes - ones perfect, two need rebuild.

std KYB suspension set

2 x rb20det motors. - 1 long engine with all manifolds and turbo, other just head and block.

3" front dump + std catback and twin 2.5"

std tailshaft.

various panels (to fix drivers 1/4) including a set of dented GTR fronts.

If the right offer was made I would sell the lot in one go. Its all there to make either a track beast, or a street weapon.

Edited by Bl4cK32

Bathurst R32 GTR keyring official merchandise from the race - $30

62458_1510043544962_3625499_n.jpg

Bathurst R32 GTR framed picture approximately A3 size - official merchandise from the race - $50

47043_1510044984998_4239516_n.jpg

Gameboy Colour(clear purple edition) + Pokemon Red - $100

3071r .63 rear - $800ono (needs ex gate)

I don't really know what these go for soooo.

Used but decent condition, nearly no shaft play if any at all. Selling as it doesn't suit my needs but came with a car I bought. Will have it off the car next week at the latest. Will get pics once it's off.

And can do a part swap for a full rb25 turbo set up (lines, manifold etc) with cash my way or a 2510 also after an AM performance RB dump pipe screamer so can part swap for that too.

Have for sale:

steel intercooler piping for fmic, suit standard inlet manifold. $75

Standard RB25DET crossover pipe with standard bov. $40

Standard RB25DET manifold $75

Standard RB25DET front pipe $40

Dont need this stuff anymore, removed for upgrade. all in good condition.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...