Jump to content
SAU Community

Recommended Posts

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

For sale rx4 4 door/ 929 coupe package deal

$8500 ono

1974 rx4 4door flat nose model

The good.

Mark mills built 13bt mild port

s6 rotors 2mm scr seals

s5 turbo

microtech lt 10

Bosch coil pack

3"dump ,exhaust hooker muffler

PWR radiator

PWR intercooler

spl thermo

s4 gear box /rx4 bell housing H/D organic clutch

bosch 044 carter pre pump and surge tank

also comes with 700cc sard injectors not in car

16" wantabee rims

car made around 185rwkw on 6-8 psi engine has done less than 10000 since rebuilt and never boosted

the bad the body is rusty and but still registred and defect free

Thegood complete 929 coupe rolling shell just minus engine has rx4 flat nose front end conversion in primer very straight both cars as i bought them very sad to see them go but baby n.o. 3 on the way not much time for so many projects.

So some of them have to go i suppose.pls pm can txt pics

bump

For sale D1 Drift seats brand new, only 2 days old.

Was going to put them in my 34 GTT but can find seat rails to match

and not paying 500 big ones for custom ones, (thats each).

$500 for both, they are black and grey in colour,

They came will universal rails so come take them as well.

PM me if you are keen

Need them gone asap so i can get newish standard ones

Pics if you need them.

19x8.5" +35 speedy cheetah

5x114.3 suit ford/nissan/toyota.

Bought for my BA XR6T but have decided to put money to new FMIC & Tune rather than looks.

Good condition, some gutter rash but only 1-2cm marks Selling as bought, boxed and ready to go

$690ono

9637mg9_20.jpeg

9067cn9_20.jpeg

1744b63_20.jpeg

3636k52_20.jpeg

580859i_20.jpeg

Need this stuff gone! make an offer on anything.

Stainless steel top mount manifold suit rb20/25

MTX jackhammer 12" 250wrms in ported box

kicker 400wrms mono block amp

standard rb25 turbo

50mm external wastegate (4 bolt flange)

intercooler piping suit rb25 with standard position turbo and crossover

2x 14" steelies with good tread suit honda

dell 24" full HD pc monitor, hdmi etc.

PM if you're interested :) cheers

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

Carbon canister?

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

How'd they look on the GTR when you had it?

Stainless steel top mount manifold suit rb20/25 with 2 bolt 38mm wastegate flange (BRAND NEW) $200

Stainless steel top mount manifold suit rb20/25 with 4 bolt 50mm wastegate flange (USED) $300

MTX jackhammer 12" 250wrms in ported box $100

kicker 400wrms mono block amp $100

standard rb25 turbo $125

standard S1 RB25DET coil-packs $30

50mm external wastegate (4 bolt flange) $40

intercooler piping suit rb25 with standard position turbo and crossover $50

2x 14" 4x100 steelies with good tread suit honda $30

Open to offers guys, need this stuff gone. All in good working order.

Pics on request.

PM if you're interested or txt me on 0425366582 :) cheers

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

Real Garrett GT3071R, good condition, next to no shaft play. Rear blades are mint, front blades have some very small chips in a couple of blades but doesn't affect the performance of it. Came with a car I bought but doesn't suit my needs. Already off and ready to go, can throw in a stangard manifold with a spacer welded to it to suit the turbo but will need something sorted out to run an ex gate.

Garrett GT3071R CHRA

(Product Code: 700177-5023)

Description:

Turbo Charger model

GT3071R

CHRA

700177-5023

Compressor Wheel Inducer Size (mm)

53.13

Compressor Wheel Trim

56

Turbine Wheel Exducer Size (mm)

54.98

Turbine wheel Trim

84

$850 ono

May swap for R32 suspension parts (except coiloves), oil cooler set up, or just something of interest.

IMG_20120718_112126-1.jpg

IMG_20120718_112051-1.jpg

IMG_20120718_112152.jpg

Edited by Import S13

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...