Jump to content
SAU Community

Recommended Posts

R33 s2 front door cards, rear side cards and rear seats $200

R33 stock exhaust turbo back $150

300zx 16x7.5 wheels tyres need replacing $200

R33 interior parts $100

R33 stock exhaust $100

300zx wheels $150

Also have a PAIR of volk challange zero 17x9+22 have good tread on inside (camber wear then flipped) $350ono

Got a whole load of R32 parts for sale.

PRICES ARE FIRM.

If it is not listed we don't have it.

RB20DE engine with loom $450

R32 5 speed manual gearbox $350

Front Reo no cuts or damage $150

rear sway bar stock suit s13 r32 180sx $20

boot rubber $20

NA crossover pipe x2 $20 each

clutch fan uncut $20

radiator shroud $40

r32 4 door rubber door seal have both fronts and the passenger rear($40 each)

R32 GTR/r33 rear brakes with discs $120

starter motor $20

air flow metre $50

ECU (can be nistuned) $100

Center console (arm rest part) $70

din console(where the radio etc goes) $70

gearshifter leather $20

center surround (has been cut to suit screen install )$20

under dash panel $20

front coilover pair (dampener and height adjustable) $200

electric Side mirrors each $70

stock arms have 2x camber 1x toe and 1x caster with new bushing $10 each

ECU cover/ flare holder $20

glove box side panel $20

glovebox $30

type S front bar uncut $200

tail lights pair $150

S2 projector headlights pair $200

indicator driver side clear/orange $40

master cyl (new in 2010 have receipt) $50

cluster NA with batterguage blue faced $50

climate control digital $80

TXT or call 0416 580 22 three as i dont check here very often.

photos on request.

If it is listed i still have it and will update as things sell.

prices are firm.

Got a whole load of R32 parts for sale.

PRICES ARE FIRM.

If it is not listed we don't have it.

RB20DE engine with loom $450

RB20 R32 gearbox manual $350

Front Reo no cuts or damage $150

rear sway bar stock suit s13 r32 180sx $20

boot rubber $20

NA crossover pipe x2 $20 each

clutch fan uncut $20

radiator shroud $40

r32 4 door rubber door seal have both fronts and the passenger rear($40 each)

R32 GTR/r33 rear brakes with discs $120

starter motor $20

air flow metre $50

ECU (can be nistuned) $100

Center console (arm rest part) $70

din console(where the radio etc goes) $70

gearshifter leather $20

center surround (has been cut to suit screen install )$20

under dash panel $20

front coilover pair (dampener and height adjustable) $200

electric Side mirrors each $70

stock arms have 2x camber 1x toe and 1x caster with new bushing $10 each

ECU cover/ flare holder $20

glove box side panel $20

glovebox $30

type S front bar uncut $200

tail lights pair $150

S2 projector headlights pair $200

indicator driver side clear/orange $40

master cyl (new in 2010 have receipt) $50

cluster NA with batterguage blue faced $50

climate control digital $80

TXT or call 0416 580 two two three. as i dont check emails very often.

photos on request.

If it is listed i still have it and will update as things sell.

prices are firm.

F S : V35 Coupe Urethane Nismo Style Front Bumper Bars

If you have ever dabbled with aftermarket bars for the V35 you will come to realise (as I did) that our cars are VERY low, and fibreglass bars break quite easily and are an endless source of frustration.

I finally bit the bullet and ordered one of these awesome copy Nismo urethane bars out of the USA. Then when I got a postage quote of $1,250 I nearly died. So I bought a few to make the postage cost effective, and subsequently have spares for sale.

They are imho superior to the factory Nismo items, as these are made of urethane (in fact they almost feel like rubber), whereas the genuine bars are fibreglass and break with a decent crunch.

The fit is near enough to perfect, and indicators fit near enough to perfect also (unlike the other fg bar I have had, the fit of which was AWFUL).

They are located in Adelaide, but I can ship if required. I would imagine shipping would be around $100-$150 within Aus depending on destination. Weight is around 10kg, but obviously cubic weight is much higher.

$900 each ono (which if you have ever imported one yourself you will realise is a great deal - and saves you the headaches importing them and the issues and costs with customs I won't go into!).

Grab one before I put them on Ebay for $1k each!

These are THE bars for V35s in my opinion, and given they are urethane and almost unbreakable, may be the last bar you ever buy for your V35.

post-669-0-92593100-1380422202_thumb.jpg

post-669-0-68206500-1380422204_thumb.jpg

post-669-0-11175700-1380422206_thumb.jpg

post-669-0-63102200-1380422209_thumb.jpg

post-669-0-90845000-1380422211_thumb.jpg

post-669-0-60056400-1380422214_thumb.jpg

post-669-0-97446800-1380422216_thumb.jpg

Apexi Power FC Djetro 3BAR MAP Sensor + with cable

Works Perfectly Fine, Removed only because I removed the Power FC a while ago and went back to Standard ECU and no longer needed it.

it is the 3 pin plug NOT the 5 pin, which means the boost solenoid (if upgraded) is run off the same wires that the standard solenoid runs off from the ECU, NOT into the MAP sensors plug then into the Power FC <-- (5 pin plug)

$100 ONO

post-57938-0-98479700-1380538587_thumb.jpg

post-57938-0-94077400-1380538896_thumb.jpg

post-57938-0-62898100-1380538958_thumb.jpg

Hi all :)

FS - APEXi AVC-R Limited Edition boost controller (Black) with an additional new control valve and all instructions - In excellent condition - $375

This is a great boost controller with so many functions :) grab a bargain...!

Hi all :)

FS - APEXi AVC-R Limited Edition boost controller (Black) with an additional new control valve and all instructions - In excellent condition - $375

This is a great boost controller with so many functions :) grab a bargain...!

Sold pending payment...

SOME BUY BEFORE I PUT ON ON EBAY!
OFFERS PEOPLE OOOOFFFFFEEERRRRSSSSSSSS!!

We got loads of boy racers on here might be interested in..........

Sparco race suit. Triple layered full FIA approved, fire retardant suit.

Black with white stitching. - Im 170cm tall, solid build for idea of size (should be slightly loose for fire retardant to be effective)

black suede sparco hightop race shoes with white logo - US10 (equivalent)

Will supply photos on demand via MMS - 0433 eight three zero 055

Sold my drift car, need to mod the new daily keen on selling asap.

15064sparco%20sprint%206.jpg

20267sparco%20esse.jpg

(high top suede version)

Very similar - except black, and triple layered version. (higher spec)

$650 for both.

Paid over $1,000 from autosport in 2012 - Used only 4 times.

Perfect condition.


Regards,
Weez.

For sale in SA



Car: 1998 Nissan Skyline R34 GTT


Drivetrain: RB25det NEO – Semi-auto tiptronic.


Colour: silver


Kms: 120000


Price: $9500 ono !!!!!!!!!!!!!!!!!!!!!!!!11!!1eleventy


Location: Andrews farm/ Thebarton (work)


Contact: 0413-145-430 or pm me here.


Modifications:


Full nismo/ HKS exhaust


new BC racing coilovers (under warranty)


New slotted brakes/ bendix pads


New titanium window tint


Front mount intercooler


Deleted rear wing (available if you want it)


17” aftermarket wheels with TOYO Proxy tires


Carbon fibre interior trim


DVD double din player


clear front and side nismo indicators



IMG_3624_zps92cf86f1.jpg




IMG_3609_zps2460d503.jpg



IMG_3644_zpse5c1b1ae.jpg



advert here


http://www.skylinesaustralia.com/forums/topic/432754-fssa-r34-gtt-10000/


lol well dont ask me to swap because i have one of thoes too :P

i have concidered selling the RS4-S and keeping the 34....but the wife likes the stag better :P

Edited by GH05T

R33 Items For Sale

R33 Gtst 5 stud Front Hubs- $150 (pair)

R33 Gts 4 Stud Hubs (all four) – $200

R33 Gts 4 stud Rotors (all four) - $60

Front two need to be machined

R33 Non turbo Brakes with allot of meat on pads– (all four) - $130

R33 Lower control arms- $80 (pair)

R33 rear Driveshafts- $80 (pair)

R33 handbrake assembly - no cables = (pair)- $50

R33 Items For Sale

R33 Gtst 5 stud Front Hubs- $150 (pair)

R33 Gts 4 Stud Hubs (all four) – $200

R33 Gts 4 stud Rotors (all four) - $60

Front two need to be machined

R33 Non turbo Brakes with allot of meat on pads– (all four) - $130

R33 Lower control arms- $80 (pair)

R33 rear Driveshafts- $80 (pair)

R33 handbrake assembly - no cables = (pair)- $50

RB25DET neo bottom end for sale

Original bore /pistons with original crosshatch pattern, no lip on top of bores

Perfect replacement for your dead bottom end

Doesnt come with sump or oil pickup, you can use your own if you choose, engine located in Perth so if you have a mate here then he is welcome to inspect

I wilbe in S.A in the first week of october, will be going to unley and holden hill so if you are on the way I can deliver or I can put it on a pallet and send it if you are happy to pay for freight it you are out in woop woop

Chasing $450 or best offer

Engine is on gumtree if you want photos (ad id 1027891245) or can send you pictures if you give me mobile number

If your (GENUINELY) Interested then pm or 0435383471

SOLD !!

RB Ali radiator 60mm $100

R33 cat back exhaust , deletes cat and bolts to your front pipe. X force stainless exhaust one muffler, twin blast pipes in mild steel joined to it. $300 Ono

rb25 purple label afm $70

r33 adjustable front strut brace blue $80

rb25 ps pump $60

R33 manual cluster 120xxx $80

Pm for pics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...