Jump to content
SAU Community

Recommended Posts

Have some r34 gtr wheels with tyres for sale. Some gutter rash but still look good. Tyres are 235 45 18 federal fronts are about 70 percent rears are pretty bald. 1100 o.n.o and a full set of r34 gtr suspension in good working order for 300 o.n.o txt 0420945669

post-89345-0-93836000-1417513368_thumb.jpg

post-89345-0-03640000-1417513389_thumb.jpg

post-89345-0-04668600-1417513408_thumb.jpg

post-89345-0-42304300-1417513424_thumb.jpg

post-89345-0-43785800-1417513458_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...

fs

r32 manual tailshaft 100

r32 gtr front hubs camber arm etc 100 a side

r32 gtr abs unit 150

r32 gtr standard intercooler brackets 50

r32 gtr brake duct plasticss 100

r32 wiper motor 40

180 tailights and centre garnish 50 a set

180/s13 door complete minus trim 50

r33 hks super dragger exhaust 200

r32 glass full set

bare rb20 intake mani 20

rb25 neo intake mani complete 150

r33 centre dash vents 60

  • 3 weeks later...

up for sale is my pride and joy, high powered performance gtst. which is also featured in the zoom magazine, previous owner had set this beast as a track car, also spending a lot of $$$ on it has one at import monster sau nats 2012 for quickest 800m mod 2wd class.

also at import monster sau nats 2012 800m highest speed mod 2wd class.

there is no back seats and carpet had been removed, has a bonds half cage $700 installed

has two r34 gtr bucket seats.

gtr rear end

omp race spec stearing wheel

a set of $700 defi din gage for oil,press,water,oil,temp

has a zetronic ethanol display screen $500

nismo gtr 320km cluster white $1000

phantom boost gauge $220

fully enginerrd certificates so hassall free

motor rb25 30 to4z turbo water and oil cooled

2000cc injectors areo flow fuel rail

all braided lines runs from engine to the boot and connects to a 5 ltr sard fuel surge tank with x2 walbro 450 in tank pumps

nismo in tank fuel pump to exterior

has an immobiliser built in too

x2 fuel location for exterior pumps

also has an e flex sensor so you can use petrol or e85 sensor and computer does the rest.

huge plenom with qhf 90 mm throttle body

Ross cas full balanced

drilled out oil remains blow off is plumped back

blisten shocks all new bushes

sway bars in boot engine bay under Neath sway bars

r33gtr wheels with brand be hankook tyres $1500 for set of 4

response head unit alpine speakers

brakes upgrade to dixcel type gs slotted rotors with zpads $2500

has also just put in a PPG dog box 1st to 4 gear straight cut 5 normal gear $8500

also has a nismo twin plate coper mix clutch but good friend jim berry had it supped up for me costing $3000 but strong guarantee it will last

r33gtr rear end 4:11

also eagle conrods, je pistons, custom exhaust camshaft (256deg) single coil up rated springs drain back vents on head drilled out oil returns rb26 cam covers with mines baffles external oil feed1mm restrictions full balanced QF45 throttle body high energy oil sump, tomei oil pump, factory Ross cass balancer, gready intake manifold, custom front mount inter cooler, Phoenix alloy radiator, custom 3.5 inch 5zigen exhaust system, high current igniter, link g4 plug in engine management system with link 2bar map sensor gready profec and electronic boost controller

the whole e85 fuel system cost $7600

car mad 450kw 601hp ran 11.08 at creek with old box be easy 10z with new box

car has receipt for every thing no joy rides no time wasters $27000 no less over 60k worth of grunt and power munches any thing on the road on low boost.

car also is featured in zoom mag custom plates SKYLNE also has 3 boost settings off is 14 psi low is 21 psi and a high 26 psi

call me on

0437797237

post-120788-14212412435469_thumb.jpg

Pair of GENUINE Bride DIGO-R seats and rails for R33 GTS-T, purchased from Japanese Import Spares 18 months ago, seats are immaculate, no rips/tears/stains etc, just a little dusty from car being in storage.
Selling due to going to Cage and Fixed seat.
Retail for $1K a seat, and $200+ per rail, selling for $1200 as a complete bolt in package. No separating the pair, nor the rails.

034.jpg

Contact Ben on 0439 888 043, or PM here, Car is in storage @ pooraka but seats will be removed tomorrow and can picked up from modbury. Can also help with delivery.

Pair of 17x8 +36 wheels for sale. They have 'Hinodex' and Japan stamped on the back so I assume that's the brand (not a clue as they came with the car).

Currently have Federal RSR 595's on them in 205/50/17. Have plenty of tread left (99% of use was daily driving).

Asking $300 ono (don't be affraid to throw me an offer).

Located SE Adelaide hills.

Cheers, Brenton.

post-96537-0-39526200-1421827753_thumb.jpg post-96537-0-69868400-1421827776_thumb.jpg post-96537-0-84433900-1421827797_thumb.jpg

FS SA

R32 gtr door cards

customised to hold duel front speakers

flocking embossed with GTR logo

they came as spares with my car and they seem to have screws holding one sides trim, so not %100 condition
whats pictured is whats available.

$100 for both.

20150120_155523_zpswttly8lj.jpg20150120_155602_zps1vdala35.jpg

Pair of 17x8 +36 wheels for sale. They have 'Hinodex' and Japan stamped on the back so I assume that's the brand (not a clue as they came with the car).

Currently have Federal RSR 595's on them in 205/50/17. Have plenty of tread left (99% of use was daily driving).

Asking $300 ono (don't be affraid to throw me an offer).

Located SE Adelaide hills.

Cheers, Brenton.

attachicon.gifDSC_0025.JPG attachicon.gifDSC_0026.JPG attachicon.gif10937406_10206035340231886_1181093836_n.jpg

Price drop $250.

whats involved in getting these in a 32gtr as far as the rails do you know?

Should be a straight swap, I've had two mates put 32 gtr seats in 33 gtst so the reverse swap will fit

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...