Jump to content
SAU Community

Recommended Posts

Hey all,

Ive been searching quite heavily for a while now. I'm thinking about my build and trying to see what the road of external wg looks like as its probably the simplest way I'm gonna get my turbo up and running.

Anyway, Ive been looking for a manifold. Everything I find is top mount, top mount, top mount!

Does there exist a low mount manifold with an external wastegate port? I don't really want to spend a fortune either. I see some manifold for $100 some for $500 some for $900+ Thats abit too much to pay for pipes....

Ive got a high mount manifold here which I do not want to use. Ive also got a spare standard manifold which Ive been thinking about modifying with a port for a WG but I heard if not done properly it will not hold boost well.

Help me guys.

RB25DET turbo is most likely a gt3071.

Link to comment
https://www.sau.com.au/forums/topic/355270-options-for-low-mount-wg/
Share on other sites

i know hks used to make a low mount with external gate port but i dont think they make them anymore other than that its either mod your standard one or even speak to kyle at 6 boost and get one made up

Any pics of your WG port?

Edit: Look what I found :) This looks pretty mint. Very hidden too.

Ive got an idea for a screamer pipe/plumb back system I want to share too.

Basically this is my idea. Screamer pipes are loud as shit so you probably don't really want to drive on the street with it on. Ive been thinking of a method to make one which you can connect/disconnect in a matter of minutes.

I think Ive got it.

I found a place which sells a piece of flex pipe about 14" long designed to connect to 35 to 38mm wastegates(I'm sure they can be customized to fit larget). Anywho this pipe connects straight to the WG(a special flange is provided to adapt to any 35/38mm wg) You are also give a special flange with the bolt thread to weld down low to your dump pipe to return the fumes from the WG. My method is simple. Get a special cap made of stainless steel which can fit over the flange on the dump. When you want to scream externally, unscrew the flex pipe from the dump, put the cap over the flange and you've got a screamer. To sweeten the deal, have your welder or exhaust shop weld a dedicated pipe along side your dump pipe and point it to the ground. Get another one of these flanges and weld that to the end of this dedicated screamer pipe then simply attach the flex pipe to the screamer pipe flange.

post-68383-0-36519300-1298686657_thumb.jpg

Edited by SargeRX8

on the cheap, there are 2 ways of doing it, modify the std manifold, by putting in a 90 degree bend from the top of where they all merge - which I have heard can cause turbulence when exhaust gases are expelled and things like poor boost control/extra wear and tear on the turbo - i have also heard others that have had no problems, personally - I decided to modify my turbo housing - same concept - but havent heard any others having boost issues this way - and mine holds 18-19psi flat.

you just need to take it to a welder/turbo/exhaust/tuner shop and it shouldn't cost too much.

This is after I got mine coated:

post-36975-0-69636600-1298688977_thumb.jpg post-36975-0-84714100-1298689062_thumb.jpg

on the cheap, there are 2 ways of doing it, modify the std manifold, by putting in a 90 degree bend from the top of where they all merge - which I have heard can cause turbulence when exhaust gases are expelled and things like poor boost control/extra wear and tear on the turbo - i have also heard others that have had no problems, personally - I decided to modify my turbo housing - same concept - but havent heard any others having boost issues this way - and mine holds 18-19psi flat.

you just need to take it to a welder/turbo/exhaust/tuner shop and it shouldn't cost too much.

This is after I got mine coated:

post-36975-0-69636600-1298688977_thumb.jpg post-36975-0-84714100-1298689062_thumb.jpg

Wow that looks pretty mint man. How much did that cost you to get that welded? Does it matter that its 90degrees from the flow of exhaust? People say you need to have it like angled in facing the engine where the exhaust flow is coming from. Also is that a 44mm vband? Who did you get to do the heat coating?

Edited by SargeRX8

Wow that looks pretty mint man. How much did that cost you to get that welded? Does it matter that its 90degrees from the flow of exhaust? People say you need to have it like angled in facing the engine where the exhaust flow is coming from. Also is that a 44mm vband? Who did you get to do the heat coating?

cost - paid Dr Drift to get the hole cut on the housing and weld the 90 degree bend - then a mate of mine did the upper weld and joined them together - I had to adjust a little so my aircon line could fit - i cant remember the cost, couldn't be more then 100-200 to cut a hole and some welding

in terms of angle and 90 degree- most i have seen are 90 deg, facing exhaust flow would be ideal, but lets face it, all the gases are going to pass through there one way or another...

yes, that is a Tial 44mm gate with vband clamps...

jet hot coatings did the job in castlemaine - took about 10 days i think, but that was when part of vic got flooded and some of their machinery wasn't working and they were waiting on that.

Adam

Don't really need externalgate on GT3071. You can run it with a strong actuator.

How every ou can weld a screamer pipe on to the turbine housing, but be sure to check its face tolerance after welding as likely it would be distorted by heat.

Image0021.jpg

Image0024.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...