Jump to content
SAU Community

Recommended Posts

Fantastic work!

I'm still a little bummed I didn't make my return trip home from the Nationals via Sydney, so I could stop by and have a look... though it did shave a few hundred km off the drive.

How far away is the engine build? Have you decided on all the details for it yet?

Fantastic work!

I'm still a little bummed I didn't make my return trip home from the Nationals via Sydney, so I could stop by and have a look... though it did shave a few hundred km off the drive.

How far away is the engine build? Have you decided on all the details for it yet?

Thanks Ian.

It s ok maybe nextime you are in sydney John would be more then happy to show you the fab work and what his aiming to build.

The build has been slow, just getting the head ready for assembly as the bottom end is completed. ( Still trying to get pics for this )

All the other aspects of the car are ready and up to date, just need to drop the motor im and start finishing this build.

It's almost like the next pics you post couldn't possibly be better than what you've already posted...

But No.... They just get more awesome!

Have you weighted the manifold/turbo/gate assembly? Noted John thought it wouldn't need any brace/supporting. Just wondering what the actual weight is :)

It's almost like the next pics you post couldn't possibly be better than what you've already posted...

But No.... They just get more awesome!

Have you weighted the manifold/turbo/gate assembly? Noted John thought it wouldn't need any brace/supporting. Just wondering what the actual weight is :)

The weight of the manifold with just the wastegates bolted on is about 7kg.

Spoke to John about the brace, he will be adding a brace or bracing system to the manifold however at this point of time he has not stated where. Once he does i will update you.

Cool thanks :) is it for clearance reasons. My 1jz manifold does the opposite (faces the comp cover away)

The turbo was rotated towards the rocker cover to achieve the best exit of the turbo that was not a 90 degree bend like everyone else has, john has said 90 degree bend can cause upto 15% loss in efficiency of the turbo.

post-49633-0-19066300-1321525978_thumb.jpg

Low mount manifold? Or does the comp cover face in towards the rocker cover?

This pic will answer your question

The red lines drawn on the inlet are approximate anti-surge slot locations to be milled out?

The weight of the manifold with just the wastegates bolted on is about 7kg.

Spoke to John about the brace, he will be adding a brace or bracing system to the manifold however at this point of time he has not stated where. Once he does i will update you.

Sweet :)

I remember earlier in the thread it was stated it wasn't needed, perhaps that was only in early stages. 7kg + turbo would be quite a hefty end result.

Be interesting to see where it's braced and what not - look forward to that update :thumbsup:

Sweet :)

I remember earlier in the thread it was stated it wasn't needed, perhaps that was only in early stages. 7kg of stainless steel + heat + turbo would be quite a hefty end result.

Be interesting to see where it's braced and what not - look forward to that update :thumbsup:

fyp

heat + stainless steel = bending.

good welds will not stop it.

keep us updated. :)

This pic will answer your question

The red lines drawn on the inlet are approximate anti-surge slot locations to be milled out?

The red lines are for the installation of a plunger infront of the turbo.

John does not like anti surge slots as this also reduces the efficiency of the turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...