Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

There will also be a 'guess the power output' competition for a particular car...

Manufacturer engine output specs will be available on the day.

It will be running in 4WD mode - bets taken on the day.

Should be fun :D

There will also be a 'guess the power output' competition for a particular car...

Manufacturer engine output specs will be available on the day.

It will be running in 4WD mode - bets taken on the day.

Should be fun :D

You taking bets on what car as well?

1989 VAZ Lada Niva 2121c

Will work out a closest 'guess to the nearest .1 kw' sheet. I say 28.4 - but money talks on the day :D

Engine type: VAZ-2121 type. Water cooling serial 4 cylinder OHC gasoline engines

Total cubic displacement: 1,568cc

Bore × stroke: 79mm×80mm

Stroke: Bore ratio: 1.01:1

Compression ratio: 8.5:1

Fuel feeder: Carburetor

The highest output: 73.0 Hp at 5,400 rpm

Largest torque: 11.6kg-m at 3,400 rpm

brownrussian2.jpg

Max - speak to Sam.

Another car is already set to do an SAFC tune - best to do them early on (while we eating)

Also...

A raffle to help raise funds for the MAS stand - as well as the 'power guess' comp will be run on the day. If you have anything you'd like to donate to the prize pool (and I mean ANYTHING) - please let Al know.

Trophy for top power 4WD and RWD.

Sorry for not posting guys been flat out getting the D1 Datto ready for Nationals Drift comp next week....

Minor tuning such as SAFC's, boost, or timing can be carried out on the day.

Looking forward to seeing you all and welcoming you to my new home, a lot have already brought their cars for work, or just to say hi..

PS: My 'educated' guess is 29.7 kw @ all four paws

Doc.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...