Jump to content
SAU Community

Recommended Posts

Hey, gentlemans

I've got a screamer on my RB25 GT3076 50mm external gate setup.

I love having a relatively quiet car, that gets super loud only when i want it, as I used to have straight pipes (no cats/muffs etc) on the car, and while it sounded awesome, it was too loud for everyday driving.

Has anybody tried putting a muffler or resonator on the screamer pipe? I don't even know if there is room. Just wondering what sort of results or success you had? The other option would be slightly longer piping to get it to the rear of the car, or at least half way there.

Share your experiences

Link to comment
https://www.sau.com.au/forums/topic/356053-mufflerresonator-for-screamer-pipe/
Share on other sites

get a 2 inch motor bike muffler, like the ones the postmen use.

maybe you can get a reducer pipe to 50 mm?

it could work i guess.

but pointless if you want a screamer pipe. just control it with your right foot?

TiTAN, thanks for the link to that thread. I tried searching but somehow didn't find that thread.

I'll talk to my exhaust guy in a few weeks when i've got money, i just wanted to get other peoples opinions on what it would sound like? I'm guessing a resonator would make the sound a bit deeper without really quieting it down, where as a muffler would make it quieter?

Put a cat on there as well as the muffler and you have a legal screamer.

im not sure what the legalities would be though as a cat doesnt work unless its hot and a screamer doesnt have hot exhaust running through it all the time.

Im in the same boat, I dont want to plumb mine back as I only have a 3 inch system. A screamer would be too loud for an everyday driver imo, I would prefer to run a muffler on the screamer like these setups. I might make one and see how quiet I can get it. Great idea. :thumbsup:

U don't need a 2" screamer for a 2.5L motor unless u have a massively flowed engine trying to run like 5psi of boost. Make up a 1.75" screamer and get a 1.75" hotdog muffler from an exhaust distributor. Run it alongside the exhaust system and end it about half way along the gearbox.

How far down your system that you plumb back your screamer will effect the sound level.

The closer you plumb back to the rear of the system, the louder it should get as your bypassing the exhaust systems mufflers.

i have a muffler on myne. found a random old hills muffler (was for an old morris i think, 1.5" or something pathetic like that) at my dads tyre store, added a few bits of random pipe i cut out of a wreck and welded them together, it ends just after where the cat normally is in the main system. its loud enough to be noticeable on boost but quiet enough to not give me the shits (i hate screamers). all in all it works very well for something that was free

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...